Natural Building

AUGUST 3, 2020

The following are her thoughts about green buildings and the rating systems that score them. Despite greater efficiencies and more greenery, buildings increasingly consume energy and resources, forget the poor, and cannibalize the natural life-support system. It is no longer enough to “do no harm”. .

Green Building 52

Green Building Sustainability Environmental Impact Assessment Renewable Energy Systems 52

Natural Building

MARCH 12, 2020

After completing a degree in Environmental Engineering, I had spent two years in Costa Rican rainforest, volunteering for a sustainable forest management project. Building with local materials also concentrates environmental impacts where the communities using them can take responsibility for sustainable management and mitigation.

Building Materials Manufacturing 97

Building Materials Manufacturing Building Codes Building Materials Fire Protection System Installation 97

Revit OpEd

MAY 10, 2012

It allows a Civil 3D user to define the shared coordinate system to be passed on to a Revit project. Note that it uses a file formatted as ACCSXML (Autodesk Consulting Coordinate System eXtensible Markup Language). Check it out, might help your next project? I just set up Shared Coordinates on a project the regular way.

Building Information Modeling (BIM) 80

Building Information Modeling (BIM) Project Management Consulting Ceiling Systems Structural Systems 80

Revit OpEd

MAY 9, 2012

Should I Use Revit for this Project? the architect isnt using Revit, the engineers arent using Revit, we dont really need 3D for this project, this project doesnt have the margin, this project is fast track, this project isnt big enough, this project is too big". Is this our first project using Revit? -

Building Information Modeling (BIM) 61

Building Information Modeling (BIM) Project Management Consulting Project Management Building Performance Measurement 61

Revit OpEd

JULY 20, 2012

For Autodesk Revit Architecture, Autodesk Revit Structure, and Autodesk Revit MEP, you can find the update in the Data & Downloads > Updates section of each product page: Autodesk Revit Architecture 2013 UR1. Autodesk Revit Structure 2013 UR1. Improves stability when opening projects from previous versions of Revit.

Piping Installation 61

Piping Installation Building Information Modeling (BIM) Project Management Consulting Structural Systems 61

Building Information Management

DECEMBER 2, 2012

The efficient life-cycle management of the built environment will not happen until change management is accelerated. Efficient construction delivery methods (IPD – integrated project delivery, JOC – job order contracting), cloud computing, and BIM are all integral components. buildingSMART alliance Conference.

Building Information Modeling (BIM) 45

Building Information Modeling (BIM) Integrated Project Delivery (IPD) Project Management Consulting Facility Management 45

Building Information Management

DECEMBER 2, 2012

The efficient life-cycle management of the built environment will not happen until change management is accelerated. Efficient construction delivery methods (IPD – integrated project delivery, JOC – job order contracting), cloud computing, and BIM are all integral components. buildingSMART alliance Conference.

Building Information Modeling (BIM) 40

Building Information Modeling (BIM) Integrated Project Delivery (IPD) Project Management Consulting Facility Management 40

Revit OpEd

SEPTEMBER 6, 2012

In-Place Massing and Project Orientation Inequity. Ive always stressed that people should start a project without being concerned about site alignment immediately. A recent post at RevitForum.org underscores that bias when it asked if the two project orientation tools seem to work differently? Thursday, September 06, 2012.

Building Information Modeling (BIM) 60

Building Information Modeling (BIM) Project Management Consulting Project Management Architecture 60

Revit OpEd

APRIL 11, 2012

When we have architecture and structure in separate Revit models we end up with somewhat clumsy graphics in wall sections. This is more pronounced if the structural slab is in the structure model only. It's a little easier to manage than reveals. Managing all the reveals could be a coordination nightmare.

Building Information Modeling (BIM) 53

Building Information Modeling (BIM) Wall Systems Project Management Consulting Flooring Systems 53

Revit OpEd

MAY 4, 2012

Starting Projects - Two Pieces of Advice. Project Coordination - Early Days. CAD Surveys and your Revit Project. Comments: Comments are moderated to manage spamming. Any reference to Revit, Revit Architecture, Revit MEP or Revit Structure on this site is made acknowledging this ownership. Reset Shared Coordinates.

Project Management Consulting 63

Project Management Consulting Architecture Ceiling Systems Project Management 63

Revit OpEd

SEPTEMBER 4, 2012

The first button is effectively acknowledging the changed family but preserving values that we may have entered or altered in the project, they may be different from the original family. Said another way the project is correct (the project version of the family). Comments: Comments are moderated to manage spamming.

Project Management Consulting 63

Project Management Consulting Change Management Architecture Project Management 63

Revit OpEd

SEPTEMBER 20, 2012

Comments: Comments are moderated to manage spamming. Any reference to Revit, Revit Architecture, Revit MEP or Revit Structure on this site is made acknowledging this ownership. In-Place Massing and Project Orientation Inequity. Ive also been a part of the consulting team for CDV Systems since 2005. Shared Coordinates.

Project Management Consulting 78

Project Management Consulting Architecture Change Management Structural Systems 78

Revit OpEd

SEPTEMBER 8, 2012

Id never tried to move either the Survey or Project Base Point symbols "up" before so it took me by surprise that it could be done. Labels: Project Base Point , Survey Point , Troubleshooting. Comments: Comments are moderated to manage spamming. In-Place Massing and Project Orientation Inequity. at 8:00 AM. Egress Paths.

Surveying 61

Surveying Project Management Consulting Architecture Project Management 61

Revit OpEd

SEPTEMBER 12, 2012

The concept of View Discipline appeared with Revit Structure. It was meant to make it simple to alter the appearance of our model to be more in sync with what a structural engineer wants to see. Apart from the automatic graphically biased changes they make, they really just help us segregate views in the project browser.

Building Information Modeling (BIM) 55

Building Information Modeling (BIM) Site Planning Project Management Consulting HVAC Systems 55

Revit OpEd

APRIL 18, 2012

How tangible or detectable that performance gain really is will depend greatly on the scope of your project. This means each project should have its own workset structure based on its own conditions. There may be some worksets that many projects have in common, but it isnt the same thing as a Layer standard. Wing South.

Building Information Modeling (BIM) 65

Building Information Modeling (BIM) Project Management Consulting Flooring Systems Project Management 65

Revit OpEd

SEPTEMBER 11, 2012

It can be seen from within a project but not scheduled or tagged unless it is a built in parameter like those listed under the Identity group (and provided for us by Autodesk). Consider that a Project Parameter is part of a project and applied to categories of families so that it can be scheduled, but NOT tagged. Jeff Hanson Sr.

Project Management Consulting 56

Project Management Consulting Schedule Management Project Management Architecture 56

Revit OpEd

MAY 8, 2012

It was tied to the project units and you had to alter a dimension style to not use the project units settings in order to use it. This means your dimension styles can continue to depend on the Project Units as well as suppress the spaces in dimension values. The option for Suppress Spaces exists in the the Project Units dialog.

Project Management Consulting 53

Project Management Consulting Property Management Architecture Project Management 53

Revit OpEd

SEPTEMBER 18, 2012

Comments: Comments are moderated to manage spamming. Any reference to Revit, Revit Architecture, Revit MEP or Revit Structure on this site is made acknowledging this ownership. In-Place Massing and Project Orientation Inequity. Ive also been a part of the consulting team for CDV Systems since 2005. Shared Coordinates.

Project Management Consulting 80

Project Management Consulting Architecture Schedule Management Change Management 80

Revit OpEd

MAY 3, 2012

If you are preparing for installing the 2013 Revit products via the Building Design Suites then you might want to start with the System Requirements PDF documents for each version. Comments: Comments are moderated to manage spamming. Should I Use Revit for this Project? Thursday, May 03, 2012. at 8:39 PM. Email This BlogThis!

Building Design 53

Building Design Project Management Consulting Ceiling Systems Architecture 53

Revit OpEd

MARCH 30, 2012

Comments: Comments are moderated to manage spamming. Any reference to Revit, Revit Architecture, Revit MEP or Revit Structure on this site is made acknowledging this ownership. Kiwi Codes - Project Browser for 2013. Revit Level Elevations Project and Shared. Project Browser Interferes with Plotting and Expor.

Project Management Consulting 66

Project Management Consulting Architecture Permits Schedule Management 66

Revit OpEd

MARCH 30, 2012

Comments: Comments are moderated to manage spamming. Any reference to Revit, Revit Architecture, Revit MEP or Revit Structure on this site is made acknowledging this ownership. Kiwi Codes - Project Browser for 2013. Revit Level Elevations Project and Shared. Project Browser Interferes with Plotting and Expor.

Project Management Consulting 65

Project Management Consulting Schedule Management Architecture Property Management 65

Revit OpEd

AUGUST 3, 2012

Same for the right click option over the Sheet category in the project browser. Comments: Comments are moderated to manage spamming. Any reference to Revit, Revit Architecture, Revit MEP or Revit Structure on this site is made acknowledging this ownership. Ive also been a part of the consulting team for CDV Systems since 2005.

Project Management Consulting 56

Project Management Consulting Architecture Building Design Structural Systems 56

Revit OpEd

APRIL 6, 2012

IsReference settings break down like this: Not a Reference - ignored by Revit in the project environment, still useful in a family to create "the bones". Weak Reference - Seen in Project by dimensions, align tool, Revit favors Strong over Weak Strong Reference - Seen in project by dimensions, align tool and Revit sees these first.

Building Information Modeling (BIM) 74

Building Information Modeling (BIM) Project Management Consulting Architecture Project Management 74

Revit OpEd

SEPTEMBER 10, 2012

Session Title: Coordinating Projects with Shared Coordinates. There is one project file with "slides" for each location of the conference. There is one project file with "slides" for each location of the conference. The Large and Small project folders contain the same collection regardless of where you attended the session.

Project Management Consulting 53

Project Management Consulting Architecture Project Management Change Management 53

Revit OpEd

AUGUST 1, 2012

It involves projects that use worksets. You can do the same thing in the project browser over the view name, choose Make Workset Editable too. Same thing happens if you delete a family from the project browser without borrowing it first. Comments: Comments are moderated to manage spamming. Wednesday, August 01, 2012.

Project Management Consulting 53

Project Management Consulting Architecture Project Management Structural Systems 53

Revit OpEd

JUNE 11, 2012

To make this possible you need to edit the walls structure and select a layer to unlock, like this: 1 - Click Modify, 2 - Select the edge of a layer, 3 - Unlock the padlock. Could it be that the wall is not being cut in the ceiling plan view and the multiple lines are actually projection lines? Shared Coordinates. Egress Paths.

Wall Systems 56

Wall Systems Ceiling Systems Site Planning Project Management Consulting 56

Revit OpEd

MAY 16, 2012

Then again I could just select multiple views in the project browser and apply them. Comments: Comments are moderated to manage spamming. Any reference to Revit, Revit Architecture, Revit MEP or Revit Structure on this site is made acknowledging this ownership. Should I Use Revit for this Project? Shared Coordinates.

Project Management Consulting 65

Project Management Consulting Architecture Ceiling Systems Risk Management 65

Revit OpEd

JULY 19, 2012

Layers) for the host wall in a project. Comments: Comments are moderated to manage spamming. Any reference to Revit, Revit Architecture, Revit MEP or Revit Structure on this site is made acknowledging this ownership. Revit Consultant - Revit Training, Revit Implementation and Navisworks I started using Revit at work in 2002.

Wall Systems 72

Wall Systems Building Information Modeling (BIM) Project Management Consulting Site Planning 72

Revit OpEd

SEPTEMBER 3, 2012

There should never be any identical usernames working on a workset project. When nobody else is working on the project you can open a central file and pretend to be the ill mannered users that havent relinquished elements properly. Comments: Comments are moderated to manage spamming. Thats not the gist of the post though.

Building Information Modeling (BIM) 72

Building Information Modeling (BIM) Project Management Consulting Change Management Architecture 72

Revit OpEd

MARCH 30, 2012

Comments: Comments are moderated to manage spamming. Any reference to Revit, Revit Architecture, Revit MEP or Revit Structure on this site is made acknowledging this ownership. Kiwi Codes - Project Browser for 2013. Revit Level Elevations Project and Shared. Project Browser Interferes with Plotting and Expor.

Building Information Modeling (BIM) 58

Building Information Modeling (BIM) Project Management Consulting Architecture Schedule Management 58

Revit OpEd

MAY 18, 2012

Comments: Comments are moderated to manage spamming. Any reference to Revit, Revit Architecture, Revit MEP or Revit Structure on this site is made acknowledging this ownership. Should I Use Revit for this Project? Revit Consultant - Revit Training, Revit Implementation and Navisworks I started using Revit at work in 2002.

Project Management Consulting 58

Project Management Consulting Architecture Ceiling Systems Risk Management 58

Revit OpEd

SEPTEMBER 14, 2012

Comments: Comments are moderated to manage spamming. Any reference to Revit, Revit Architecture, Revit MEP or Revit Structure on this site is made acknowledging this ownership. In-Place Massing and Project Orientation Inequity. Ive also been a part of the consulting team for CDV Systems since 2005. Shared Coordinates.

Project Management Consulting 68

Project Management Consulting Architecture Change Management Schedule Management 68

Revit OpEd

SEPTEMBER 17, 2012

Comments: Comments are moderated to manage spamming. Any reference to Revit, Revit Architecture, Revit MEP or Revit Structure on this site is made acknowledging this ownership. In-Place Massing and Project Orientation Inequity. Ive also been a part of the consulting team for CDV Systems since 2005. Shared Coordinates.

Project Management Consulting 53

Project Management Consulting Architecture Change Management Building Codes 53

Revit OpEd

SEPTEMBER 5, 2012

It is the formal repackaging of the Autodesk Labs Project Spark. Sure, there were projects or design considerations that the missing features would prove frustrating but a single seat of full Revit would probably have covered it, collaboration with outside parties that is. Comments: Comments are moderated to manage spamming.

Building Information Modeling (BIM) 74

Building Information Modeling (BIM) Project Management Consulting Architecture Building Design 74

Revit OpEd

MAY 14, 2012

Comments: Comments are moderated to manage spamming. Any reference to Revit, Revit Architecture, Revit MEP or Revit Structure on this site is made acknowledging this ownership. Should I Use Revit for this Project? Revit Consultant - Revit Training, Revit Implementation and Navisworks I started using Revit at work in 2002.

Ceiling Systems 68

Ceiling Systems Building Information Modeling (BIM) Project Management Consulting Flooring Systems 68

Revit OpEd

MAY 11, 2012

Comments: Comments are moderated to manage spamming. Any reference to Revit, Revit Architecture, Revit MEP or Revit Structure on this site is made acknowledging this ownership. Should I Use Revit for this Project? Revit Consultant - Revit Training, Revit Implementation and Navisworks I started using Revit at work in 2002.

Project Management Consulting 53

Project Management Consulting Architecture Ceiling Systems Risk Management 53

Revit OpEd

SEPTEMBER 9, 2012

Comments: Comments are moderated to manage spamming. Any reference to Revit, Revit Architecture, Revit MEP or Revit Structure on this site is made acknowledging this ownership. In-Place Massing and Project Orientation Inequity. Ive also been a part of the consulting team for CDV Systems since 2005. Shared Coordinates.

Project Management Consulting 63

Project Management Consulting Architecture Change Management Structural Systems 63