Revit OpEd

JULY 20, 2012

Improves stability when selecting a new host for an element within an In-place Wall. Improves creation consistency with Physical Wall when coping an Analytical Model Wall. Improves stability when splitting pipes which belong to different systems. Reference Planes and Wall Closure. Moving Ceiling Grid Pattern.

Piping Installation 61

Piping Installation Building Information Modeling (BIM) Project Management Consulting Structural Systems 61

Revit OpEd

JULY 24, 2012

Another "inside" gem from Inside the System which offers deeper insight to how the numbers work. Reference Planes and Wall Closure. Moving Ceiling Grid Pattern. ► 2004. (2). ► December 2004. (1). ► November 2004. (1). ► 2004. (2). ► December 2004. (1). Other Links.

Electrical Systems 53

Electrical Systems Ceiling Systems Architecture Wall Systems 53

Revit OpEd

JUNE 13, 2012

If room separation lines are "off the table" then the architect would end up using something else like actual walls and hiding them. When we unload a workset the walls are still there and that means so are Room Separation lines. A zone would wrap up the spaces that are served by a single system as you described. ► 2004. (2).

Building Information Modeling (BIM) 76

Building Information Modeling (BIM) Zoning HVAC Systems Wall Systems 76

Building Radar

JULY 15, 2020

Machine learning allows IT systems to improve themselves by independently “learning” from data using statistical methods. 3D Printing In 2004, the University of South Carolina succeeded in building a wall only using 3D printing for the first time – today a house can be printed in 20 hours.

Building Information Modeling (BIM) 52

Building Information Modeling (BIM) Building Automation Site Planning Cost Control 52

Revit OpEd

JULY 30, 2012

Reference Planes and Wall Closure. Moving Ceiling Grid Pattern. ► 2004. (2). ► December 2004. (1). ► November 2004. (1). ► 2004. (2). ► December 2004. (1). ► November 2004. (1). Ive also been a part of the consulting team for CDV Systems since 2005.

Architecture 56

Architecture Ceiling Systems Schedule Management Wall Systems 56

Revit OpEd

SEPTEMBER 12, 2012

When MEP (Systems as it was called then) appeared a year later they extended the concept to Mechanical and Electrical (plumbing lumped in with Mechanical till release 2013). Structural - Similar to architecture but hides non-load bearing walls and some hidden line behavior with respect to concrete floors/slabs and foundations.

Building Information Modeling (BIM) 55

Building Information Modeling (BIM) Site Planning Project Management Consulting HVAC Systems 55

Revit OpEd

MARCH 31, 2012

It makes it easier to keep certain sections (details/wall sections) and elevations (interior) off of overall floor plan views for example. Related to this is the notion that there are representations that wed like to control for floor plan orientation and offer a different appear for the reflected ceiling plan (RCP) version.

Project Management Consulting 53

Project Management Consulting Site Planning Building Controls Architecture 53

Revit OpEd

APRIL 25, 2012

Rooms and areas can be deleted in model views like floor plans and ceiling plans. We can also create rooms and areas in a schedule view before there are any walls or boundaries available to define where they should go. Wall Floor Interaction and Linked Models. ► 2004. (2). ► December 2004. (1).

Building Information Modeling (BIM) 56

Building Information Modeling (BIM) Schedule Management Project Management Consulting Site Planning 56

Revit OpEd

JULY 17, 2012

Reference Planes and Wall Closure. Moving Ceiling Grid Pattern. ► 2004. (2). ► December 2004. (1). ► November 2004. (1). ► 2004. (2). ► December 2004. (1). ► November 2004. (1). Ive also been a part of the consulting team for CDV Systems since 2005.

Architecture 53

Architecture Ceiling Systems Schedule Management Wall Systems 53

Revit OpEd

JULY 25, 2012

Reference Planes and Wall Closure. Moving Ceiling Grid Pattern. ► 2004. (2). ► December 2004. (1). ► November 2004. (1). ► 2004. (2). ► December 2004. (1). ► November 2004. (1). Ive also been a part of the consulting team for CDV Systems since 2005.

Schedule Management 53

Schedule Management Architecture Electrical Systems Ceiling Systems 53

Revit OpEd

JULY 27, 2012

We're basically building the same product we built 75 years ago, with a few new systems stuck in there. Reference Planes and Wall Closure. Moving Ceiling Grid Pattern. ► 2004. (2). ► December 2004. (1). ► November 2004. (1). ► 2004. (2). ► December 2004. (1).

Building Information Modeling (BIM) 58

Building Information Modeling (BIM) Change Management Schedule Management Building Materials Manufacturing 58

Building Radar

JANUARY 14, 2020

ERP and CRM systems: How to make better use of data resources 3. ERP and CRM systems: How to make better use of data resources The construction industry is beginning to discover digital aids for itself, which have long been standard in other industries. Building planning: digital for optimized workflow 2.

Building Information Modeling (BIM) 52

Building Information Modeling (BIM) Building Materials Manufacturing Site Planning Building Materials 52

Building Information Management

JULY 27, 2016

The MasterFormat numbering system and titles provide a common, transparent manner to readily communicate construction item, tasks, and associated information. 2004+ Edition. Divisions are the top Level (Level 1) in the hierarchy of the classification system. 03 81 16 Track Mounted Concrete Wall Sawing. 1995 Edition.

Fire Protection System Installation 45

Fire Protection System Installation Fire Protection Systems Collaboration Heavy Equipment Manufacturing 45

Building Information Management

JULY 27, 2016

The MasterFormat numbering system and titles provide a common, transparent manner to readily communicate construction item, tasks, and associated information. 2004+ Edition. Divisions are the top Level (Level 1) in the hierarchy of the classification system. 03 81 16 Track Mounted Concrete Wall Sawing. 1995 Edition.

Fire Protection System Installation 45

Fire Protection System Installation Fire Protection Systems Collaboration Heavy Equipment Manufacturing 45