Revit OpEd

JUNE 11, 2012

Detail Level Ignored with Unlocked Wall Layers. We can unlock a layer or layers in a wall to allow "pulling" them up or down separately from the rest of a wall. of Subtle , Detail Level , Walls. Could it be that the wall is not being cut in the ceiling plan view and the multiple lines are actually projection lines?

Wall Systems 56

Wall Systems Ceiling Systems Site Planning Project Management Consulting 56

Revit OpEd

JUNE 8, 2012

Revit MEP Electrical Calculations. Martin Schmid has been sharing some deeper insight into the "magic" behind electrical calculations that Revit provides. Labels: Electrical , Revit MEP. Detail Level Ignored with Unlocked Wall Layers. Revit MEP Electrical Calculations. ► 2004. (2). ► 2004. (2).

Electrical Systems 58

Electrical Systems Architecture Wall Systems Structural Systems 58

Revit OpEd

JULY 5, 2012

It offers a Curtain Grid Manager that controls both panels and grids now, offers a preview of the system as well as helping to distinguish between vertical and horizontal orientations. Electrical Panel Load Calculations. Reference Planes and Wall Closure. ► 2004. (2). ► December 2004. (1). ► 2011.

Ceiling Systems 63

Ceiling Systems Architecture Schedule Management Wall Systems 63

Revit OpEd

JULY 6, 2012

For readers that are already familiar with the Point Known PKNail site measuring system it appears to be similar, at least in concept. Electrical Panel Load Calculations. Reference Planes and Wall Closure. ► 2004. (2). ► December 2004. (1). ► November 2004. (1). ► 2004. (2).

Ceiling Systems 74

Ceiling Systems Architecture Wall Systems Electrical Systems 74

Revit OpEd

JULY 20, 2012

Improves stability when selecting a new host for an element within an In-place Wall. Improves creation consistency with Physical Wall when coping an Analytical Model Wall. Improves stability when splitting pipes which belong to different systems. Electrical Panel Load Calculations. ► 2004. (2).

Piping Installation 61

Piping Installation Building Information Modeling (BIM) Project Management Consulting Structural Systems 61

Revit OpEd

JUNE 12, 2012

Using that method in conjunction with key to select ALL the walls, you can get a VERY quick SF. The downside is that is uses the wall's centerline. Detail Level Ignored with Unlocked Wall Layers. Revit MEP Electrical Calculations. ► 2004. (2). ► December 2004. (1). ► November 2004. (1).

Flooring Systems 65

Flooring Systems Property Management Wall Systems Architecture 65

Revit OpEd

JULY 30, 2012

Electrical Panel Load Calculations. Reference Planes and Wall Closure. ► 2004. (2). ► December 2004. (1). ► November 2004. (1). ► 2004. (2). ► December 2004. (1). ► November 2004. (1). Ive also been a part of the consulting team for CDV Systems since 2005.

Architecture 56

Architecture Ceiling Systems Schedule Management Wall Systems 56

Revit OpEd

JULY 25, 2012

Labels: Calculations , Electrical , Revit MEP. Electrical Panel Load Calculations. Reference Planes and Wall Closure. ► 2004. (2). ► December 2004. (1). ► November 2004. (1). ► 2004. (2). ► December 2004. (1). ► November 2004. (1). at 8:00 AM.

Schedule Management 53

Schedule Management Architecture Electrical Systems Ceiling Systems 53

Revit OpEd

JULY 18, 2012

Electrical Panel Load Calculations. Reference Planes and Wall Closure. ► 2004. (2). ► December 2004. (1). ► November 2004. (1). ► 2004. (2). ► December 2004. (1). ► November 2004. (1). Ive also been a part of the consulting team for CDV Systems since 2005.

Ceiling Systems 53

Ceiling Systems Architecture Schedule Management Wall Systems 53

Revit OpEd

APRIL 3, 2012

Revit MEP users are used to all the electrical content being located under a single folder and then broken down by usage. Now well find Electrical and Lighting and these are further broken down by Architectural and MEP. Wall Floor Interaction and Linked Models. ► 2004. (2). ► December 2004. (1).

Building Information Modeling (BIM) 53

Building Information Modeling (BIM) Architecture Schedule Management Electrical Systems 53

Revit OpEd

JULY 17, 2012

Electrical Panel Load Calculations. Reference Planes and Wall Closure. ► 2004. (2). ► December 2004. (1). ► November 2004. (1). ► 2004. (2). ► December 2004. (1). ► November 2004. (1). Ive also been a part of the consulting team for CDV Systems since 2005.

Architecture 53

Architecture Ceiling Systems Schedule Management Wall Systems 53

Revit OpEd

SEPTEMBER 12, 2012

When MEP (Systems as it was called then) appeared a year later they extended the concept to Mechanical and Electrical (plumbing lumped in with Mechanical till release 2013). There is no real difference between Mechanical and Electrical disciplines graphically, based solely on the View Discipline parameter changing. Revit "TIME".

Building Information Modeling (BIM) 55

Building Information Modeling (BIM) Site Planning Project Management Consulting HVAC Systems 55

Revit OpEd

JUNE 13, 2012

If room separation lines are "off the table" then the architect would end up using something else like actual walls and hiding them. When we unload a workset the walls are still there and that means so are Room Separation lines. A zone would wrap up the spaces that are served by a single system as you described. ► 2004. (2).

Building Information Modeling (BIM) 76

Building Information Modeling (BIM) Zoning HVAC Systems Wall Systems 76

Revit OpEd

JULY 27, 2012

We're basically building the same product we built 75 years ago, with a few new systems stuck in there. Electrical Panel Load Calculations. Reference Planes and Wall Closure. ► 2004. (2). ► December 2004. (1). ► November 2004. (1). ► 2004. (2). ► December 2004. (1).

Building Information Modeling (BIM) 58

Building Information Modeling (BIM) Change Management Schedule Management Building Materials Manufacturing 58

Revit OpEd

JUNE 14, 2012

Detail Level Ignored with Unlocked Wall Layers. Revit MEP Electrical Calculations. ► 2004. (2). ► December 2004. (1). ► November 2004. (1). ► 2004. (2). ► December 2004. (1). ► November 2004. (1). ▼ June 2012. (5). DWG Files and Funky Snapping.

Surveying 72

Surveying Building Information Modeling (BIM) Project Management Consulting Architecture 72

Revit OpEd

APRIL 18, 2012

Linked Files - Electrical (Revit). Wall Floor Interaction and Linked Models. ► 2004. (2). ► December 2004. (1). ► November 2004. (1). Ive also been a part of the consulting team for CDV Systems since 2005. Security (this scope usually has "need to know" restrictions). Linked CAD (etc.

Building Information Modeling (BIM) 65

Building Information Modeling (BIM) Project Management Consulting Flooring Systems Project Management 65