Revit OpEd

JULY 19, 2012

Labels: Exteriors , Finishes , Interiors , Materials , Tips , Wall Closure. Moving Ceiling Grid Pattern. ► 2006. ► December 2006. (14). ► October 2006. (5). ► September 2006. (10). ► August 2006. (8). ► July 2006. (6). ► June 2006. (13).

Wall Systems 72

Wall Systems Building Information Modeling (BIM) Project Management Consulting Site Planning 72

Revit OpEd

APRIL 19, 2012

System families have a Function setting. Thats true for Walls, Floor, Roofs and Ceilings. Finish 1 [4] = Finish Exterior [4]. Finish 2 [5] = Finish Interior [5]. Just a question, I also practice n°4 finish for exterior and n°5 for interior, but for the pure operation of Revit, is there a reason?

Building Information Modeling (BIM) 53

Building Information Modeling (BIM) Wall Systems Flooring Systems Ceiling Systems 53

Revit OpEd

JULY 20, 2012

Allows exporting of materials painted on elements to ODBC. Corrects the display of the materials category within the Paint interface. Improves stability when splitting pipes which belong to different systems. Improves consistency of adding circuits to equipment that are connected to a pipe or duct system. ► 2006.

Piping Installation 61

Piping Installation Building Information Modeling (BIM) Project Management Consulting Structural Systems 61

Revit OpEd

JUNE 13, 2012

They were however using them for the room finish schedules. A zone would wrap up the spaces that are served by a single system as you described. They did this w/o also carrying over an additional piece of the puzzle which is a check box for is "Space Bounding" for elements such as walls, ceilings etc. ► 2006.

Building Information Modeling (BIM) 76

Building Information Modeling (BIM) Zoning HVAC Systems Wall Systems 76

Revit OpEd

APRIL 25, 2012

Rooms and areas can be deleted in model views like floor plans and ceiling plans. Finish and Cancel Inequity. ► 2006. ► December 2006. (14). ► October 2006. (5). ► September 2006. (10). ► August 2006. (8). ► July 2006. (6). ► June 2006. (13).

Building Information Modeling (BIM) 56

Building Information Modeling (BIM) Schedule Management Project Management Consulting Site Planning 56

Construction Specifier

JULY 25, 2024

The construction process and various finishing activities, such as pouring concrete, or dry wall finishing, can generate large amounts of moisture. Left unaddressed, this moisture can migrate into various areas of the structure, including into the roofing system, leaving materials wet and deteriorating.

Roofing Systems 59

Roofing Systems Construction Management Concrete Pouring Wall Systems 59

Construction Specifier

MAY 9, 2022

The normally hard surfaces used for walls, floors and ceilings can create an echo chamber where one dog’s barking can reverberate throughout the entire facility. If windows or other wall obstacles are present, panels can also be installed on the wall behind the cages or on the ceiling. m in length and painted to match any room décor.

Wall Systems 52

Wall Systems Facility Management Steel Fabrication Controls Manufacturing 52