CCR Magazine

JULY 10, 2024

“The collaborative effort of IMC Architecture , Classic Image and Ray Builders resulted in the development’s completion ahead of schedule and under budget, a very rare achievement in New York,” continued Weiss. The other three sides of the building feature an EIFS finish.”

Flooring Systems 52

Flooring Systems Project Management Consulting Building Design Property Management 52

Revit OpEd

APRIL 19, 2012

System families have a Function setting. Thats true for Walls, Floor, Roofs and Ceilings. Finish 1 [4] = Finish Exterior [4]. Finish 2 [5] = Finish Interior [5]. Just a question, I also practice n°4 finish for exterior and n°5 for interior, but for the pure operation of Revit, is there a reason?

Building Information Modeling (BIM) 53

Building Information Modeling (BIM) Wall Systems Flooring Systems Ceiling Systems 53

Revit OpEd

APRIL 25, 2012

Delete Sheets In Browser or Schedules. Rooms and areas can be deleted in model views like floor plans and ceiling plans. Revit warns us that they have been deleted from the model but they are still listed in schedules. To really delete them we have to open a schedule view and delete them there. Wednesday, April 25, 2012.

Building Information Modeling (BIM) 56

Building Information Modeling (BIM) Schedule Management Project Management Consulting Site Planning 56

Revit OpEd

JULY 20, 2012

Allows exporting of materials painted on elements to ODBC. Corrects the display of the materials category within the Paint interface. Improves stability when splitting pipes which belong to different systems. Improves consistency of unit formatting within Panel Schedules. Panel Schedule and Load Calculation Addition.

Piping Installation 61

Piping Installation Building Information Modeling (BIM) Project Management Consulting Structural Systems 61

Construction Specifier

JULY 25, 2024

The construction process and various finishing activities, such as pouring concrete, or dry wall finishing, can generate large amounts of moisture. Left unaddressed, this moisture can migrate into various areas of the structure, including into the roofing system, leaving materials wet and deteriorating.

Roofing Systems 59

Roofing Systems Construction Management Concrete Pouring Wall Systems 59

Revit OpEd

JULY 19, 2012

Labels: Exteriors , Finishes , Interiors , Materials , Tips , Wall Closure. Comments: Comments are moderated to manage spamming. Panel Schedule and Load Calculation Addition. Moving Ceiling Grid Pattern. ► 2006. ► December 2006. (14). ► October 2006. (5). ► September 2006. (10).

Wall Systems 72

Wall Systems Building Information Modeling (BIM) Project Management Consulting Site Planning 72

Revit OpEd

JUNE 13, 2012

They were however using them for the room finish schedules. I have recently had to use room separation lines as the only way to create rudimentary FM schedules to allocate users and equipment to a desk/zone. A zone would wrap up the spaces that are served by a single system as you described. ► 2006.

Building Information Modeling (BIM) 76

Building Information Modeling (BIM) Zoning HVAC Systems Wall Systems 76