Revit OpEd

JUNE 13, 2012

If room separation lines are "off the table" then the architect would end up using something else like actual walls and hiding them. When we unload a workset the walls are still there and that means so are Room Separation lines. A zone would wrap up the spaces that are served by a single system as you described. ► 2006.

Building Information Modeling (BIM) 76

Building Information Modeling (BIM) Zoning HVAC Systems Wall Systems 76

Revit OpEd

JULY 24, 2012

Another "inside" gem from Inside the System which offers deeper insight to how the numbers work. Reference Planes and Wall Closure. Moving Ceiling Grid Pattern. ► 2006. ► December 2006. (14). ► October 2006. (5). ► September 2006. (10). ► August 2006. (8).

Electrical Systems 53

Electrical Systems Ceiling Systems Architecture Wall Systems 53

Construction Specifier

JULY 25, 2024

The construction process and various finishing activities, such as pouring concrete, or dry wall finishing, can generate large amounts of moisture. Left unaddressed, this moisture can migrate into various areas of the structure, including into the roofing system, leaving materials wet and deteriorating.

Roofing Systems 59

Roofing Systems Construction Management Concrete Pouring Wall Systems 59

Revit OpEd

JULY 30, 2012

Reference Planes and Wall Closure. Moving Ceiling Grid Pattern. ► 2006. ► December 2006. (14). ► October 2006. (5). ► September 2006. (10). ► August 2006. (8). ► July 2006. (6). ► June 2006. (13). ► May 2006. (10). ► 2006.

Architecture 56

Architecture Ceiling Systems Schedule Management Wall Systems 56

Revit OpEd

SEPTEMBER 12, 2012

When MEP (Systems as it was called then) appeared a year later they extended the concept to Mechanical and Electrical (plumbing lumped in with Mechanical till release 2013). Structural - Similar to architecture but hides non-load bearing walls and some hidden line behavior with respect to concrete floors/slabs and foundations.

Building Information Modeling (BIM) 55

Building Information Modeling (BIM) Site Planning Project Management Consulting HVAC Systems 55

Revit OpEd

APRIL 25, 2012

Rooms and areas can be deleted in model views like floor plans and ceiling plans. We can also create rooms and areas in a schedule view before there are any walls or boundaries available to define where they should go. Wall Floor Interaction and Linked Models. ► 2006. ► December 2006. (14).

Building Information Modeling (BIM) 56

Building Information Modeling (BIM) Schedule Management Project Management Consulting Site Planning 56

Revit OpEd

MARCH 31, 2012

It makes it easier to keep certain sections (details/wall sections) and elevations (interior) off of overall floor plan views for example. Related to this is the notion that there are representations that wed like to control for floor plan orientation and offer a different appear for the reflected ceiling plan (RCP) version.

Project Management Consulting 53

Project Management Consulting Site Planning Building Controls Architecture 53

Revit OpEd

JULY 17, 2012

Reference Planes and Wall Closure. Moving Ceiling Grid Pattern. ► 2006. ► December 2006. (14). ► October 2006. (5). ► September 2006. (10). ► August 2006. (8). ► July 2006. (6). ► June 2006. (13). ► May 2006. (10). ► 2006.

Architecture 53

Architecture Ceiling Systems Schedule Management Wall Systems 53

Revit OpEd

JULY 25, 2012

Reference Planes and Wall Closure. Moving Ceiling Grid Pattern. ► 2006. ► December 2006. (14). ► October 2006. (5). ► September 2006. (10). ► August 2006. (8). ► July 2006. (6). ► June 2006. (13). ► May 2006. (10). ► 2006.

Schedule Management 53

Schedule Management Architecture Electrical Systems Ceiling Systems 53

Revit OpEd

JULY 27, 2012

We're basically building the same product we built 75 years ago, with a few new systems stuck in there. Reference Planes and Wall Closure. Moving Ceiling Grid Pattern. ► 2006. ► December 2006. (14). ► October 2006. (5). ► September 2006. (10). ► August 2006. (8).

Building Information Modeling (BIM) 58

Building Information Modeling (BIM) Change Management Schedule Management Building Materials Manufacturing 58

Construction Specifier

MAY 9, 2022

The normally hard surfaces used for walls, floors and ceilings can create an echo chamber where one dog’s barking can reverberate throughout the entire facility. According to Duman, panels are typically installed on the walls, starting with the wall opposite the cages and the end walls of the cage rooms.

Wall Systems 52

Wall Systems Facility Management Steel Fabrication Controls Manufacturing 52

CivilJungle

DECEMBER 26, 2021

Check the Attic and Ceilings : If the damage has happened in the outside portion of the roof , then you need to check the attic and ceiling for signs of water spots. If your roof has not had a proper drainage system, then you must face the issue of standing water problem. The interior ceiling is there any water damage?

Roofing Systems 52

Roofing Systems Inspection Piping Installation Building Code Compliance 52

CCR Magazine

JULY 10, 2024

The yard’s 2,300-square foot partial green roof tray system, which was supplied by Columbia Green Technologies, was delivered as a modular pre-grown tray system and includes active and passive landscaping sections, making this space a green oasis. All the rooms feature quality materials and durable fixtures.

Flooring Systems 52

Flooring Systems Project Management Consulting Concrete Pouring Building Design 52