CCR Magazine

JULY 10, 2024

The yard’s 2,300-square foot partial green roof tray system, which was supplied by Columbia Green Technologies, was delivered as a modular pre-grown tray system and includes active and passive landscaping sections, making this space a green oasis. The other three sides of the building feature an EIFS finish.”

Flooring Systems 52

Flooring Systems Project Management Consulting Building Design Property Management 52

The Korte Company

OCTOBER 5, 2018

We can see the writing on every wall we put up: The underlying driver of today’s skilled labor shortage has not been adequately addressed, so the gap between available workers and construction demand is sure to widen. And yet, school systems still devalue vocational education as a matter of policy. And it’s far from guaranteed.

HVAC Systems 74

HVAC Systems Government Works Foundation Systems Wall Systems 74

Revit OpEd

JULY 20, 2012

Allows exporting of materials painted on elements to ODBC. Improves stability when selecting a new host for an element within an In-place Wall. Corrects the display of the materials category within the Paint interface. Improves creation consistency with Physical Wall when coping an Analytical Model Wall.

Piping Installation 61

Piping Installation Building Information Modeling (BIM) Project Management Consulting Structural Systems 61

Construction Specifier

JULY 25, 2024

The construction process and various finishing activities, such as pouring concrete, or dry wall finishing, can generate large amounts of moisture. Left unaddressed, this moisture can migrate into various areas of the structure, including into the roofing system, leaving materials wet and deteriorating.

Roofing Systems 59

Roofing Systems Construction Management Concrete Pouring Wall Systems 59

Revit OpEd

JULY 19, 2012

Reference Planes and Wall Closure. Control Wall’s Material Return. Layers) for the host wall in a project. Note the two “wall closure” parameters (shown below) need to be “locked” so they stay positive (in the correct direction) when the host wall thickness changes. ► 2006.

Wall Systems 72

Wall Systems Building Information Modeling (BIM) Project Management Consulting Site Planning 72

Revit OpEd

APRIL 3, 2012

Revit MEP users are used to all the electrical content being located under a single folder and then broken down by usage. Now well find Electrical and Lighting and these are further broken down by Architectural and MEP. Wall Floor Interaction and Linked Models. Finish and Cancel Inequity. ► 2006.

Building Information Modeling (BIM) 53

Building Information Modeling (BIM) Architecture Schedule Management Electrical Systems 53

Revit OpEd

JUNE 13, 2012

They were however using them for the room finish schedules. If room separation lines are "off the table" then the architect would end up using something else like actual walls and hiding them. When we unload a workset the walls are still there and that means so are Room Separation lines. Regarding the workset comments.

Building Information Modeling (BIM) 76

Building Information Modeling (BIM) Zoning HVAC Systems Wall Systems 76