The Korte Company

OCTOBER 5, 2018

We can see the writing on every wall we put up: The underlying driver of today’s skilled labor shortage has not been adequately addressed, so the gap between available workers and construction demand is sure to widen. And yet, school systems still devalue vocational education as a matter of policy.

HVAC Systems 74

HVAC Systems Government Works Foundation Systems Wall Systems 74

Revit OpEd

JULY 30, 2012

Electrical Panel Load Calculations. Reference Planes and Wall Closure. ► 2006. ► December 2006. (14). ► October 2006. (5). ► September 2006. (10). ► August 2006. (8). ► July 2006. (6). ► June 2006. (13). ► May 2006. (10).

Architecture 56

Architecture Ceiling Systems Schedule Management Wall Systems 56

Revit OpEd

JULY 25, 2012

Labels: Calculations , Electrical , Revit MEP. Electrical Panel Load Calculations. Reference Planes and Wall Closure. ► 2006. ► December 2006. (14). ► October 2006. (5). ► September 2006. (10). ► August 2006. (8). ► July 2006. (6). ► June 2006.

Schedule Management 53

Schedule Management Architecture Electrical Systems Ceiling Systems 53

Revit OpEd

JULY 18, 2012

Electrical Panel Load Calculations. Reference Planes and Wall Closure. ► 2006. ► December 2006. (14). ► October 2006. (5). ► September 2006. (10). ► August 2006. (8). ► July 2006. (6). ► June 2006. (13). ► May 2006. (10).

Ceiling Systems 53

Ceiling Systems Architecture Schedule Management Wall Systems 53

Revit OpEd

SEPTEMBER 12, 2012

When MEP (Systems as it was called then) appeared a year later they extended the concept to Mechanical and Electrical (plumbing lumped in with Mechanical till release 2013). There is no real difference between Mechanical and Electrical disciplines graphically, based solely on the View Discipline parameter changing. ► 2006.

Building Information Modeling (BIM) 55

Building Information Modeling (BIM) Site Planning Project Management Consulting HVAC Systems 55

Revit OpEd

JULY 17, 2012

Electrical Panel Load Calculations. Reference Planes and Wall Closure. ► 2006. ► December 2006. (14). ► October 2006. (5). ► September 2006. (10). ► August 2006. (8). ► July 2006. (6). ► June 2006. (13). ► May 2006. (10).

Architecture 53

Architecture Ceiling Systems Schedule Management Wall Systems 53

Revit OpEd

JULY 27, 2012

We're basically building the same product we built 75 years ago, with a few new systems stuck in there. Electrical Panel Load Calculations. Reference Planes and Wall Closure. ► 2006. ► December 2006. (14). ► October 2006. (5). ► September 2006. (10). ► August 2006. (8).

Building Information Modeling (BIM) 58

Building Information Modeling (BIM) Change Management Schedule Management Building Materials Manufacturing 58

Construction Dive

AUGUST 29, 2009

Elois Lowy : Elektronikwaren wurden sehr schlecht repariert, Anton Brescak (EK Systems GmbH, Mozartstraße 92. December 2006 (19). November 2006 (35). October 2006 (44). September 2006 (36). August 2006 (32). July 2006 (3). Electrical & Electronic. Samuel : It can be done in many ways.

Structural Systems 215

Structural Systems Wall Systems Electrical Systems Change Management 215

Revit OpEd

JULY 19, 2012

Reference Planes and Wall Closure. Control Wall’s Material Return. Layers) for the host wall in a project. Note the two “wall closure” parameters (shown below) need to be “locked” so they stay positive (in the correct direction) when the host wall thickness changes. ► 2006.

Wall Systems 72

Wall Systems Building Information Modeling (BIM) Project Management Consulting Site Planning 72

Revit OpEd

JUNE 8, 2012

Revit MEP Electrical Calculations. Martin Schmid has been sharing some deeper insight into the "magic" behind electrical calculations that Revit provides. Labels: Electrical , Revit MEP. Detail Level Ignored with Unlocked Wall Layers. Revit MEP Electrical Calculations. ► 2006. ► December 2006. (14).

Electrical Systems 58

Electrical Systems Architecture Wall Systems Structural Systems 58

Natural Building

MARCH 16, 2007

Yurts: Living in the Round was published in 2006 by Gibbs Smith, and is the definitive source of information about anything to do with yurts. They have circular lattice walls (reminiscent of baby gates tied together) and a cone-shaped roof supported by rafters that meet in a center ring. Thanks, Kat. Kelly Hart said.

Green Building 45

Green Building Architecture Sustainability Steel Fabrication 45

Revit OpEd

APRIL 3, 2012

Revit MEP users are used to all the electrical content being located under a single folder and then broken down by usage. Now well find Electrical and Lighting and these are further broken down by Architectural and MEP. Wall Floor Interaction and Linked Models. ► 2006. ► December 2006. (14).

Building Information Modeling (BIM) 53

Building Information Modeling (BIM) Architecture Schedule Management Electrical Systems 53

Revit OpEd

JUNE 14, 2012

Detail Level Ignored with Unlocked Wall Layers. Revit MEP Electrical Calculations. ► 2006. ► December 2006. (14). ► October 2006. (5). ► September 2006. (10). ► August 2006. (8). ► July 2006. (6). ► June 2006. (13). ► May 2006. (10).

Surveying 72

Surveying Building Information Modeling (BIM) Project Management Consulting Architecture 72

Revit OpEd

JUNE 13, 2012

If room separation lines are "off the table" then the architect would end up using something else like actual walls and hiding them. When we unload a workset the walls are still there and that means so are Room Separation lines. A zone would wrap up the spaces that are served by a single system as you described. ► 2006.

Building Information Modeling (BIM) 76

Building Information Modeling (BIM) Zoning HVAC Systems Wall Systems 76

Revit OpEd

APRIL 18, 2012

Linked Files - Electrical (Revit). Wall Floor Interaction and Linked Models. ► 2006. ► December 2006. (14). ► October 2006. (5). ► September 2006. (10). ► August 2006. (8). ► July 2006. (6). ► June 2006. (13). ► May 2006. (10).

Building Information Modeling (BIM) 65

Building Information Modeling (BIM) Project Management Consulting Flooring Systems Project Management 65