Building Information Management

MARCH 19, 2013

BIM is the life-cycle management of the built environment supported by digital technology. BIM is the life-cycle management of the built environment supported by digital technology. While Value Management is used as term in this paper, it is arguably interchangeable with Capital Planning and Management (CPMS).

Building Information Modeling (BIM) 53

Building Information Modeling (BIM) Facility Management Project Management Project Management Consulting 53

Revit OpEd

SEPTEMBER 6, 2012

In-Place Massing and Project Orientation Inequity. Ive always stressed that people should start a project without being concerned about site alignment immediately. A recent post at RevitForum.org underscores that bias when it asked if the two project orientation tools seem to work differently? Builds and Updates.

Building Information Modeling (BIM) 60

Building Information Modeling (BIM) Project Management Consulting Project Management Architecture 60

Revit OpEd

SEPTEMBER 3, 2012

There should never be any identical usernames working on a workset project. When nobody else is working on the project you can open a central file and pretend to be the ill mannered users that havent relinquished elements properly. It is an awesome way to resolve little matters when people are all out of the model. at 8:00 AM.

Building Information Modeling (BIM) 72

Building Information Modeling (BIM) Project Management Consulting Change Management Architecture 72

Revit OpEd

MAY 14, 2012

I think they left it in there to make it easy to spot terrible modellers who do not actually create their own ceiling or model correctly. Builds and Updates. Blog Listing - BIM and Misc. Site Information. Comments: Comments are moderated to manage spamming. Copyright Information. 3 comments: Erik.

Ceiling Systems 68

Ceiling Systems Building Information Modeling (BIM) Project Management Consulting Flooring Systems 68

Revit OpEd

APRIL 6, 2012

IsReference settings break down like this: Not a Reference - ignored by Revit in the project environment, still useful in a family to create "the bones". Weak Reference - Seen in Project by dimensions, align tool, Revit favors Strong over Weak Strong Reference - Seen in project by dimensions, align tool and Revit sees these first.

Building Information Modeling (BIM) 74

Building Information Modeling (BIM) Project Management Consulting Architecture Project Management 74

Revit OpEd

APRIL 11, 2012

Wall Floor Interaction and Linked Models. When we have architecture and structure in separate Revit models we end up with somewhat clumsy graphics in wall sections. This is more pronounced if the structural slab is in the structure model only. It's a little easier to manage than reveals. Builds and Updates.

Building Information Modeling (BIM) 53

Building Information Modeling (BIM) Wall Systems Project Management Consulting Flooring Systems 53

Revit OpEd

APRIL 25, 2012

Rooms and areas can be deleted in model views like floor plans and ceiling plans. Revit warns us that they have been deleted from the model but they are still listed in schedules. This way, you could see all rooms of the project without having to list them via a schedule. Builds and Updates. Blog Listing - BIM and Misc.

Building Information Modeling (BIM) 56

Building Information Modeling (BIM) Schedule Management Project Management Consulting Site Planning 56

Revit OpEd

AUGUST 26, 2012

This information has been sitting in my inbox for a week now. Project Vasari has reached a tipping point in its evolution. Project Vasari has reached a tipping point in its evolution. As you probably know, its been a very popular project on Autodesk Labs. Project Vasari 2.1 Sunday, August 26, 2012. Vasari Update.

Building Information Modeling (BIM) 56

Building Information Modeling (BIM) Project Management Consulting Architecture Project Management 56

Revit OpEd

APRIL 20, 2012

There isnt an easy button to just eliminate shared coordinates in a project. You can move the Survey Point back to the same spot as the Project Base Point and then use Specify Coordinates at Point to reset the coordinates the file is using. You can't turn on the Visibility of either Survey or Project Base Point in a Link.

Building Information Modeling (BIM) 49

Building Information Modeling (BIM) Surveying Project Management Consulting Architecture 49

Revit OpEd

JULY 20, 2012

Improves stability when opening projects from previous versions of Revit. Improves performance of opening and closing sketch mode in projects with many families. Improves stability when drag and drop a DWG file into a Revit project. Improves section creation within a project with linked model.

Piping Installation 61

Piping Installation Building Information Modeling (BIM) Project Management Consulting Structural Systems 61

Revit OpEd

SEPTEMBER 19, 2012

They recently announced that theyre offering a software solution to bring 3D as-built models of pipes and other cylindrical MEP elements directly into Revit. However, the accuracy and utility of the model is greatly enhanced by the use of custom families. Builds and Updates. Blog Listing - BIM and Misc. Site Information.

Building Information Modeling (BIM) 56

Building Information Modeling (BIM) Project Management Consulting Architecture Change Management 56

Autodesk Construction Cloud

NOVEMBER 1, 2022

Muhammad Khalil Bin Shaiful Bahari, Boustead Projects Limited. Danielle O’Connell, Skanska USA Building Inc. Chris Walker, The PENTA Building Group. Thanks to Andrew’s work, AECOM teams have seen a massive increase in collaboration and communication, ultimately helping them deliver strong project outcomes. .

Building Information Modeling (BIM) 122

Building Information Modeling (BIM) Project Management Consulting Project Management Construction Management 122

Revit OpEd

APRIL 9, 2012

I included the following tips and advice (edited a little in this version) in a door tutorial I wrote for my Autodesk University 2005 lab called "Autodesk Revit Building Family Editor: From the Beginning". Window and Door families use the cut plane (view range) defined in the family, not just the projects view setting for view range.

Building Information Modeling (BIM) 72

Building Information Modeling (BIM) Project Management Consulting Change Management Wall Systems 72

Revit OpEd

SEPTEMBER 12, 2012

It was meant to make it simple to alter the appearance of our model to be more in sync with what a structural engineer wants to see. Apart from the automatic graphically biased changes they make, they really just help us segregate views in the project browser. In my opinion Discipline should only apply for Project Browser sorting.

Building Information Modeling (BIM) 55

Building Information Modeling (BIM) Site Planning Project Management Consulting HVAC Systems 55

Job Order Contracting

MAY 5, 2017

Building Information Modelling BIM in the Construction Industry – Technical Report TR-1405A. The National BIM Standard Definition from 2007, NBIMS states that a BIM is a: “… digital representation of physical and functional characteristics of a facility. contact-form].

Building Information Modeling (BIM) 40

Building Information Modeling (BIM) Integrated Project Delivery (IPD) Facility Management Change Management 40

Building Information Management

JULY 2, 2012

Open information exchange of Heating, Ventilating and Cooling systems (HVACie), released by the Engineer Research and Development Center for public review. HVACie extends the existing Industry Foundation Class Coordination View including equipment and system information streamlining construction shop drawing and fabrication.

HVAC Systems 40

HVAC Systems HVAC System Installation Building Information Modeling (BIM) Construction Equipment 40

Building Information Management

JULY 2, 2012

Open information exchange of Heating, Ventilating and Cooling systems (HVACie), released by the Engineer Research and Development Center for public review. HVACie extends the existing Industry Foundation Class Coordination View including equipment and system information streamlining construction shop drawing and fabrication.

HVAC Systems 40

HVAC Systems HVAC System Installation Building Information Modeling (BIM) Construction Equipment 40

Revit OpEd

APRIL 13, 2012

Loaded it into the project and was met with "nope you cant use this fitting Steve" messages whichever way I tried to use it. The fact that they modeled them to the extent of showing the inner diameter was my first "oh no." Builds and Updates. Blog Listing - BIM and Misc. Site Information. " moment.

Building Information Modeling (BIM) 56

Building Information Modeling (BIM) Project Management Consulting Architecture Schedule Management 56

Job Order Contracting

AUGUST 19, 2022

Based upon the above, why would anyone be surprised by the lack of productivity and rampant economic and environmental waste endemic to public sector facilities repair, renovation, maintenance, and new builds? Planning, Procurement, and Project Delivery System Performance is CRITICAL to Improving Productivity. AIA California Council.

Integrated Project Delivery (IPD) 81

Integrated Project Delivery (IPD) Collaboration Building Information Modeling (BIM) Building Performance Measurement 81

Autodesk Construction Cloud

MAY 11, 2023

When there’s no single source of truth on design and build projects, it leads to confusion, delays, rework and cost overruns. Tétris specialises in turnkey solutions for corporate clients, managing the design and build of inspiring, functional, and sustainable offices, retail and hospitality spaces.

Building Design 98

Building Design Building Information Modeling (BIM) Schedule Management Change Management 98

Building Information Management

SEPTEMBER 18, 2013

2013 National BIM Standard today! Building Information Modeling Model Management. BIM allows all stakeholders to have access to the same information at the same time through interoperability between technology platforms. BIM Implementation. BIM Life-Cycle Views. Attribute.

Building Information Modeling (BIM) 40

Building Information Modeling (BIM) Integrated Project Delivery (IPD) Building Materials Manufacturing Building Products Distribution 40

Job Order Contracting

SEPTEMBER 9, 2020

Any organization can consistently assure best value outcomes for facilities repair, renovation, maintenance, and new builds. The success of any repair, renovation, maintenance, or new build project is dependent upon early and ongoing collaboration among key parties. All the tools and support services are readily available.

Integrated Project Delivery (IPD) 59

Integrated Project Delivery (IPD) Building Information Modeling (BIM) Building Performance Measurement Lean Construction 59

Job Order Contracting

JANUARY 16, 2020

The innovate and exclusive Collaborative LEAN Construction Software for the Enterprise or Single Organization offering all of these features. The innovate and exclusive Collaborative LEAN Construction Software for the Enterprise or Single Organization offering all of these features.

Lean Construction 54

Lean Construction Collaboration Building Information Modeling (BIM) Cost Control 54

Revit OpEd

SEPTEMBER 5, 2012

It is the formal repackaging of the Autodesk Labs Project Spark. Sure, there were projects or design considerations that the missing features would prove frustrating but a single seat of full Revit would probably have covered it, collaboration with outside parties that is. Builds and Updates. Blog Listing - BIM and Misc.

Building Information Modeling (BIM) 74

Building Information Modeling (BIM) Project Management Consulting Architecture Building Design 74

Revit OpEd

MAY 9, 2012

Should I Use Revit for this Project? the architect isnt using Revit, the engineers arent using Revit, we dont really need 3D for this project, this project doesnt have the margin, this project is fast track, this project isnt big enough, this project is too big". Is this our first project using Revit? -

Building Information Modeling (BIM) 61

Building Information Modeling (BIM) Project Management Consulting Project Management Building Performance Measurement 61

Revit OpEd

JULY 19, 2012

Layers) for the host wall in a project. These adjustments change the 3D model, not just the 2D plan-view. Builds and Updates. Blog Listing - BIM and Misc. Site Information. Comments: Comments are moderated to manage spamming. Copyright Information. ► 2007. (77). ► December 2007. (1).

Wall Systems 72

Wall Systems Building Information Modeling (BIM) Project Management Consulting Site Planning 72

Autodesk Construction Cloud

JANUARY 6, 2022

Open minds, respect for others, responsibility taking, friendly sharing of ideas and processes and ongoing communication geared toward all-around project success? The method is one of the most progressive methods of project delivery and is quickly becoming an industry standard. Key Takeaways.

Building Design 52

Building Design Building Information Modeling (BIM) General Contracting Building Standards 52

Revit OpEd

JUNE 14, 2012

I can have a relatively small project site survey but far from origin and end up with Revit using Auto - Center to Center to place it. The warning tells us that this situation may affect the graphic depiction of information on screen. Move the files into position keeping them all near the Revit project file origin. Older Post.

Surveying 72

Surveying Building Information Modeling (BIM) Project Management Consulting Architecture 72

Revit OpEd

AUGUST 14, 2012

We propose building a Superhero Theme Park! All final model submissions must be in a “ rvt” or “ rfa” format. Design should creatively use/expand the repertoire of tools available in Autodesk Revit, Autodesk Project Vasari, IronPython, and/or Dynamo. Builds and Updates. Blog Listing - BIM and Misc.

Building Information Modeling (BIM) 53

Building Information Modeling (BIM) Project Management Consulting Site Planning Building Design 53

Revit OpEd

APRIL 18, 2012

The whole model is still there, just not visible, thatll provide some relief for performance sake. How tangible or detectable that performance gain really is will depend greatly on the scope of your project. This means each project should have its own workset structure based on its own conditions. Building Shell or Envelope.

Building Information Modeling (BIM) 65

Building Information Modeling (BIM) Project Management Consulting Flooring Systems Project Management 65

Revit OpEd

APRIL 17, 2012

I think that it is natural to be inclined toward building very parametric families. This useful name is essential for later re-use, of course, so that someone can grab it for a future project with a similar need, and adjust the family to suit. A few of us remarked that we were seeing a trend away from trying to create super-families.

Building Information Modeling (BIM) 56

Building Information Modeling (BIM) Project Management Consulting Change Management Schedule Management 56

Building Information Management

JUNE 22, 2012

The core competencies identified include competencies relating to building operations and maintenance, energy management, sustainability, water efficiency, safety (including electrical safety) and building performance measures. Fede ral Buildings Personnel Training Act.

Building Performance Measurement 45

Building Performance Measurement Fire Protection System Installation Renewable Energy Systems Fire Protection Systems 45