Revit OpEd

JULY 20, 2012

Improves stability when selecting a new host for an element within an In-place Wall. Improves creation consistency with Physical Wall when coping an Analytical Model Wall. Improves stability when splitting pipes which belong to different systems. Reference Planes and Wall Closure. Moving Ceiling Grid Pattern.

Piping Installation 61

Piping Installation Building Information Modeling (BIM) Project Management Consulting Structural Systems 61

Revit OpEd

JULY 30, 2012

Reference Planes and Wall Closure. Moving Ceiling Grid Pattern. ► 2007. (77). ► December 2007. (1). ► November 2007. (7). ► October 2007. (5). ► September 2007. (4). ► August 2007. (11). ► July 2007. (7). ► June 2007. (16).

Architecture 56

Architecture Ceiling Systems Schedule Management Wall Systems 56

Revit OpEd

SEPTEMBER 12, 2012

When MEP (Systems as it was called then) appeared a year later they extended the concept to Mechanical and Electrical (plumbing lumped in with Mechanical till release 2013). Structural - Similar to architecture but hides non-load bearing walls and some hidden line behavior with respect to concrete floors/slabs and foundations.

Building Information Modeling (BIM) 55

Building Information Modeling (BIM) Site Planning Project Management Consulting HVAC Systems 55

Revit OpEd

JUNE 13, 2012

If room separation lines are "off the table" then the architect would end up using something else like actual walls and hiding them. When we unload a workset the walls are still there and that means so are Room Separation lines. A zone would wrap up the spaces that are served by a single system as you described. ► 2007. (77).

Building Information Modeling (BIM) 76

Building Information Modeling (BIM) Zoning HVAC Systems Wall Systems 76

Revit OpEd

JULY 25, 2012

Reference Planes and Wall Closure. Moving Ceiling Grid Pattern. ► 2007. (77). ► December 2007. (1). ► November 2007. (7). ► October 2007. (5). ► September 2007. (4). ► August 2007. (11). ► July 2007. (7). ► June 2007. (16).

Schedule Management 53

Schedule Management Architecture Electrical Systems Ceiling Systems 53

Revit OpEd

JULY 17, 2012

Reference Planes and Wall Closure. Moving Ceiling Grid Pattern. ► 2007. (77). ► December 2007. (1). ► November 2007. (7). ► October 2007. (5). ► September 2007. (4). ► August 2007. (11). ► July 2007. (7). ► June 2007. (16).

Architecture 53

Architecture Ceiling Systems Schedule Management Wall Systems 53

Revit OpEd

MARCH 31, 2012

It makes it easier to keep certain sections (details/wall sections) and elevations (interior) off of overall floor plan views for example. Related to this is the notion that there are representations that wed like to control for floor plan orientation and offer a different appear for the reflected ceiling plan (RCP) version.

Project Management Consulting 53

Project Management Consulting Site Planning Building Controls Flooring Systems 53

Revit OpEd

APRIL 25, 2012

Rooms and areas can be deleted in model views like floor plans and ceiling plans. We can also create rooms and areas in a schedule view before there are any walls or boundaries available to define where they should go. Wall Floor Interaction and Linked Models. ► 2007. (77). ► December 2007. (1).

Building Information Modeling (BIM) 56

Building Information Modeling (BIM) Schedule Management Project Management Consulting Site Planning 56

Revit OpEd

JULY 27, 2012

We're basically building the same product we built 75 years ago, with a few new systems stuck in there. Reference Planes and Wall Closure. Moving Ceiling Grid Pattern. ► 2007. (77). ► December 2007. (1). ► November 2007. (7). ► October 2007. (5). ► September 2007. (4).

Building Information Modeling (BIM) 58

Building Information Modeling (BIM) Change Management Schedule Management Building Materials Manufacturing 58

Building Information Management

JULY 2, 2012

Open information exchange of Heating, Ventilating and Cooling systems (HVACie), released by the Engineer Research and Development Center for public review. HVACie extends the existing Industry Foundation Class Coordination View including equipment and system information streamlining construction shop drawing and fabrication.

HVAC Systems 40

HVAC Systems HVAC System Installation Building Information Modeling (BIM) Construction Equipment 40

Building Information Management

JULY 2, 2012

Open information exchange of Heating, Ventilating and Cooling systems (HVACie), released by the Engineer Research and Development Center for public review. HVACie extends the existing Industry Foundation Class Coordination View including equipment and system information streamlining construction shop drawing and fabrication.

HVAC Systems 40

HVAC Systems HVAC System Installation Building Information Modeling (BIM) Construction Equipment 40

Building Information Management

JULY 26, 2012

In an effort to continue this success, GSA is evaluating the building rating tools at its disposal, as required by the Energy Independence and Security Act of 2007. performance building rating system in the United States. Alliance Environmental & Natural Systems Utilities, LLC. Alternative Energy Systems. Benike, Inc.

Environmental Consulting 55

Environmental Consulting Green Building Project Management Consulting Renewable Energy Systems 55

Building Information Management

JUNE 22, 2012

Reviewers admired the system’s three levels of increasing knowledge, skills and abilities as a “concept”, but did not believe it was implementable government-­?wide. Sys tem Des ign: We developed a system that focused on the highest impact core competencies common to every agency -­? Oppor tunity: The web-­?tool

Building Performance Measurement 45

Building Performance Measurement Fire Protection System Installation Renewable Energy Systems Fire Protection Systems 45