Remove 2007 Remove Painting/finishing Remove Wall Systems
article thumbnail

Cintec in North America Announces their Cintec Anchoring System was used in helping Repair the Helmsley Building 230 Park Avenue, NYC

Civil + Structural Engineer

It was acquired (2007) for One Billion One Hundred and Fifty Million USD. This was achieved by drilling oversized holes through the face of the stone and recessing the anchor 1” from face of stone to accommodate a finish patch, thus creating an invisible repair. The Problem : By 2009, the building had begun to show its age.

article thumbnail

Revit OpEd: Finish and Cancel Inequity

Revit OpEd

Finish and Cancel Inequity. He mentioned the inconsistency between the way some elements that are sketch based are finished and the way shape editing for floors and roofs finish. Floor, roof, stair or ramp Sketch Creation = Finish and Cancel. Edit Profile = Finish and Cancel. Model Groups = Finish and Cancel.

Insiders

Sign Up for our Newsletter

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

article thumbnail

Comsa Digitizes Renovation of Century-old Bridge  in Cabrianes, Barcelona

Civil + Structural Engineer

Understanding Design and Construction Schemes The bridge features existing piles, walls, and slabs that need refurbishing and were poorly maintained. The BIM model was key to visualizing the finished project before it even began, and the final model represents the project as it was actually executed.

article thumbnail

Revit OpEd: Layer Function Setting

Revit OpEd

System families have a Function setting. Thats true for Walls, Floor, Roofs and Ceilings. Finish 1 [4] = Finish Exterior [4]. Finish 2 [5] = Finish Interior [5]. I run into wall types quite often that have these wrong or inconsistently applied. Wall Floor Interaction and Linked Models.

article thumbnail

Revit OpEd: Reference Planes and Wall Closure

Revit OpEd

Reference Planes and Wall Closure. Control Wall’s Material Return. Layers) for the host wall in a project. Note the two “wall closure” parameters (shown below) need to be “locked” so they stay positive (in the correct direction) when the host wall thickness changes. ► 2007. (77).

article thumbnail

Built on Happiness: Meet Pro Builder's 2023 Builder of the Year

The Pro Builder

It becomes a sort of self-reinforcing system.” But the impact of Schell’s mission spans well beyond the walls of its headquarters. These notes give the design team vital insights into buyers who are coming in to finish making selections for their new homes and through construction, orientation, and warranty. and Nashville, Tenn.,

article thumbnail

Revit OpEd: Revit 2013 Service Pack 1 Available

Revit OpEd

Allows exporting of materials painted on elements to ODBC. Improves stability when selecting a new host for an element within an In-place Wall. Corrects the display of the materials category within the Paint interface. Improves creation consistency with Physical Wall when coping an Analytical Model Wall.