Revit OpEd

JULY 20, 2012

Improves stability when splitting pipes which belong to different systems. Improves consistency of unit formatting within Panel Schedules. Improves consistency of adding circuits to equipment that are connected to a pipe or duct system. Comments: Comments are moderated to manage spamming. ► 2008. Parameters.

Piping Installation 61

Piping Installation Building Information Modeling (BIM) Project Management Consulting Structural Systems 61

Revit OpEd

APRIL 3, 2012

That was done purposely so they dont show up in door or window category schedules. Revit MEP users are used to all the electrical content being located under a single folder and then broken down by usage. Now well find Electrical and Lighting and these are further broken down by Architectural and MEP. ► 2008.

Building Information Modeling (BIM) 53

Building Information Modeling (BIM) Architecture Schedule Management Electrical Systems 53

Revit OpEd

JULY 25, 2012

Panel Schedule and Load Calculation Addition. Labels: Calculations , Electrical , Revit MEP. Comments: Comments are moderated to manage spamming. Panel Schedule and Load Calculation Addition. Electrical Panel Load Calculations. ► 2008. ► December 2008. (16). ► November 2008. (17).

Schedule Management 53

Schedule Management Architecture Electrical Systems Ceiling Systems 53

Plant & Civil Engineer

FEBRUARY 12, 2024

Komatsu will be at Intermat 2024 scheduled to take place in Paris from April 24 to 27 and say that after six long years, and the cancellation of the 2021 edition due to the pandemic, they are happy for the opportunity to reconnect with customers from all over the world.

Construction Machinery 52

Construction Machinery Electrical Systems Construction Equipment Change Management 52

Revit OpEd

JULY 30, 2012

Comments: Comments are moderated to manage spamming. Panel Schedule and Load Calculation Addition. Electrical Panel Load Calculations. ► 2008. ► December 2008. (16). ► November 2008. (17). ► October 2008. (35). ► September 2008. (49). ► August 2008. (34).

Architecture 56

Architecture Ceiling Systems Schedule Management Wall Systems 56

Revit OpEd

JUNE 13, 2012

They were however using them for the room finish schedules. I have recently had to use room separation lines as the only way to create rudimentary FM schedules to allocate users and equipment to a desk/zone. A zone would wrap up the spaces that are served by a single system as you described. Revit MEP Electrical Calculations.

Building Information Modeling (BIM) 76

Building Information Modeling (BIM) Zoning HVAC Systems Wall Systems 76

Revit OpEd

JULY 27, 2012

The problems are with autodesk's management of the software and of the paying client base, who are always secondary to the shareholders. We're basically building the same product we built 75 years ago, with a few new systems stuck in there. Comments: Comments are moderated to manage spamming. These problems include: 1.It's

Building Information Modeling (BIM) 58

Building Information Modeling (BIM) Change Management Schedule Management Building Materials Manufacturing 58

Revit OpEd

JULY 18, 2012

Comments: Comments are moderated to manage spamming. Panel Schedule and Load Calculation Addition. Electrical Panel Load Calculations. ► 2008. ► December 2008. (16). ► November 2008. (17). ► October 2008. (35). ► September 2008. (49). ► August 2008. (34).

Ceiling Systems 53

Ceiling Systems Architecture Schedule Management Wall Systems 53

Revit OpEd

JULY 17, 2012

Comments: Comments are moderated to manage spamming. Panel Schedule and Load Calculation Addition. Electrical Panel Load Calculations. ► 2008. ► December 2008. (16). ► November 2008. (17). ► October 2008. (35). ► September 2008. (49). ► August 2008. (34).

Architecture 53

Architecture Ceiling Systems Schedule Management Wall Systems 53

Revit OpEd

APRIL 18, 2012

FFE NIC (by owner that may be easier to manage alone). Linked Files - Electrical (Revit). There is a little known technique for managing these using worksets when dealing with linked files and their levels and grids. Comments: Comments are moderated to manage spamming. Floors Condos. Floors Rental. Floors Residential.

Building Information Modeling (BIM) 65

Building Information Modeling (BIM) Project Management Consulting Flooring Systems Building Controls 65

ENR Construction

JULY 22, 2012

Survey Schedule. Seattle Mechanical Contractor Adds Facilities Management to Its In-House Services. The company not only designs and builds complex mechanical and electrical systems, it is also available to operate and monitor the finished facility—typically, mechanically intensive data centers and research laboratories.

Facility Management 34

Facility Management Building Information Modeling (BIM) Electrical Systems Specialty Contracting 34

CK Power

JUNE 25, 2021

When new regulations come down the pipe, owners and fleet managers ask: “Do we need all new equipment, or can old units be updated?”. How does all this new technology affect our service and maintenance schedule?”. Updating an entire fleet of diesel generators can be a long, complicated and expensive process. . urea, 67.5%

Heavy Equipment Manufacturing 52

Heavy Equipment Manufacturing Health Regulations Controls Manufacturing Quality Control 52

Building Information Management

JULY 26, 2012

The recently released sustainability and energy “scorecard” by the Office of Management and Budget (OMB) demonstrates just how successful GSA has been at reducing costs, improving efficiency and eliminating waste. GSA reduced emissions from federal buildings more than 20 percent compared with 2008. Alternative Energy Systems.

Environmental Consulting 55

Environmental Consulting Green Building Project Management Consulting Renewable Energy Systems 55

Autodesk Construction Cloud

AUGUST 20, 2021

As a Senior Project Manager, Jacob Freitas is one of those fearless champions, pushing innovation and productivity forward at Level 10 Construction. We recently spoke with Jacob about his experience with planning and construction, how the project manager role is evolving, and how Level 10 leverages technology to solve challenges.

Project Management 52

Project Management Construction Management Building Information Modeling (BIM) Schedule Management 52

Construction Specifier

JUNE 25, 2024

Without the use of ventilated facades, designers face the challenge of creating exterior walls that effectively manage water over the building’s lifespan, while providing the thermal performance needed to meet energy requirements, such as those outlined in the New York City Energy Conservation Code ( NYCECC ) and NYC’s Local Law 97.

Fire Protection System Installation 59

Fire Protection System Installation Fire Protection Systems Building Code Compliance Building Codes 59

Levelset

JUNE 29, 2022

This standard ( 1926.100 ) requires all employees to wear head protection anytime there is a risk of head injury from “impact, or from falling or flying objects, or from electrical shock and burns.” Schedule delay. Shutdowns cause schedule delays , which can be incredibly expensive on their own. Aerial lifts – 534 violations.

Safety Regulations 52

Safety Regulations Health Regulations Inspection Building Standards 52

Building Information Management

JULY 2, 2012

Open information exchange of Heating, Ventilating and Cooling systems (HVACie), released by the Engineer Research and Development Center for public review. HVACie extends the existing Industry Foundation Class Coordination View including equipment and system information streamlining construction shop drawing and fabrication.

HVAC Systems 40

HVAC Systems HVAC System Installation Building Information Modeling (BIM) Construction Equipment 40

Building Information Management

JULY 2, 2012

Open information exchange of Heating, Ventilating and Cooling systems (HVACie), released by the Engineer Research and Development Center for public review. HVACie extends the existing Industry Foundation Class Coordination View including equipment and system information streamlining construction shop drawing and fabrication.

HVAC Systems 40

HVAC Systems HVAC System Installation Building Information Modeling (BIM) Construction Equipment 40

Business Facilities

AUGUST 1, 2014

IBM Services Center: Baton Rouge will deliver technology services including application development, application management and system integration. million toward economic growth projects (including a new streetcar system). In 2008, Chrysler rolled the dice and told the world it would invest $1.8

Building Materials Manufacturing 111

Building Materials Manufacturing Renewable Energy Systems Heavy Equipment Manufacturing Controls Manufacturing 111

Building Information Management

JUNE 22, 2012

The core competencies identified include competencies relating to building operations and maintenance, energy management, sustainability, water efficiency, safety (including electrical safety) and building performance measures. We modified the energy job task analyses to include facilities operations and management activities.

Building Performance Measurement 45

Building Performance Measurement Fire Protection System Installation Renewable Energy Systems Fire Protection Systems 45