Remove 2008 Remove Flooring Systems Remove Structural Systems
article thumbnail

Charles L. Tutt Library, Colorado College: Net-zero in the Rockies

BD+C

Designed in Brutalist style by Chicago architect Walter Netsch (1920–2008), Tutt Library opened in 1961. Aligning the floors of the two new additions with those of the existing concrete structure and accommodating new systems—HVAC, sprinklers, lighting—proved to be the most nettlesome problem for the project team. .

article thumbnail

AISI Publishes “Thermal Design and Code Compliance Guide for C-Shape Cold-Formed Steel Framing in Building Envelopes”

Civil + Structural Engineer

They will also be able to determine the level of performance in an energy code or high-performance rating system. In all cases, it is recommended that users refer to the adopted codes in effect where the building or structure will be constructed.” This document is designed to meet a variety of user needs,” said Jay Larson, P.E.,

Insiders

Sign Up for our Newsletter

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

article thumbnail

Stay code-compliant with AISI’s thermal design guide

Construction Specifier

They will also be able to determine the level of performance in an energy code or high-performance rating system. In all cases, it is recommended that users refer to the adopted codes in effect where the building or structure will be constructed.”

article thumbnail

Revit OpEd: Measure Between Two References

Revit OpEd

Not much of a catch but there is no equivalent floor in this case. If there was a floor there Id just check the properties of the floor. you could sketch your own a floor around the perimeter pretty quickly. For my money, Id probably favor a floor. Steve - Have you considered mass floors? ► 2008.

article thumbnail

Revit OpEd: Happy Birthday Revit

Revit OpEd

Any reference to Revit, Revit Architecture, Revit MEP or Revit Structure on this site is made acknowledging this ownership. Wall Floor Interaction and Linked Models. ► 2008. ► December 2008. (16). ► November 2008. (17). ► October 2008. (35). ► September 2008. (49).

article thumbnail

Revit OpEd: Dept. of Echo - Don't use the Basic Ceiling

Revit OpEd

We have been using the basic ceilings where we have an exposed floor assembly above. Could make a neww floor tag that resembles a ceiling tag, but that also seems wrong. Any reference to Revit, Revit Architecture, Revit MEP or Revit Structure on this site is made acknowledging this ownership. ► 2008. ► 2007.

article thumbnail

Revit OpEd: Kitchen Equipment - RW Smith BIM Booklet

Revit OpEd

Any reference to Revit, Revit Architecture, Revit MEP or Revit Structure on this site is made acknowledging this ownership. Wall Floor Interaction and Linked Models. ► 2008. ► December 2008. (16). ► November 2008. (17). ► October 2008. (35). ► September 2008. (49).