2010 Ceiling Systems Wall Systems 
Construction Specifier
APRIL 30, 2021
Much is known about constructing partitions, whether they are made of masonry or gypsum wall board attached to metal or wood studs, to achieve the desired level of noise isolation. In buildings with ceilings, it is the combination of the floor and ceiling assembly that establishes the overall noise isolation performance between rooms.
Natural Building
AUGUST 16, 2019
Design elements like large windows, skylights, glass doors and walls, open concept spaces, and lighter wall colors all serve to enhance natural light. Another new, more high-tech way of integrating nature into a building’s design is through biomimicry, otherwise known as basing a system or structure off of biological processes.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Revit OpEd
JUNE 11, 2012
Detail Level Ignored with Unlocked Wall Layers. We can unlock a layer or layers in a wall to allow "pulling" them up or down separately from the rest of a wall. Interestingly, in Ceiling Plan views only, when we take advantage of this we lose the ability to show just two lines with Detail Level: Coarse. Labels: Dept.
Revit OpEd
JULY 19, 2012
Reference Planes and Wall Closure. Control Wall’s Material Return. Layers) for the host wall in a project. Note the two “wall closure” parameters (shown below) need to be “locked” so they stay positive (in the correct direction) when the host wall thickness changes. ► 2010.
Revit OpEd
APRIL 19, 2012
System families have a Function setting. Thats true for Walls, Floor, Roofs and Ceilings. I run into wall types quite often that have these wrong or inconsistently applied. Missing Foreword for Introducing Revit 2010. Wall Floor Interaction and Linked Models. ► 2010. ► December 2010. (30).
Revit OpEd
JULY 18, 2012
Moving Ceiling Grid Pattern. He wrote: "When you tab through to the ceiling grid while in the move command, look near the top (meaning Options Bar) at the "disjoin" check box. The next time you go to move the ceiling grid the box should be unchecked!". Labels: Ceilings , Dept. Missing Foreword for Introducing Revit 2010.
Revit OpEd
JULY 6, 2012
For readers that are already familiar with the Point Known PKNail site measuring system it appears to be similar, at least in concept. Missing Foreword for Introducing Revit 2010. Reference Planes and Wall Closure. Moving Ceiling Grid Pattern. ► 2010. ► December 2010. (30). ► August 2010.
Expert insights. Personalized for you.
98 
Let's personalize your content