Revit OpEd

APRIL 10, 2012

He mentioned the inconsistency between the way some elements that are sketch based are finished and the way shape editing for floors and roofs finish. Floor, roof, stair or ramp Sketch Creation = Finish and Cancel. Floor or roof Shape Editing = Accidentally hitting the escape key and getting kicked out of it. ► 2010.

Painting/finishing 53

Painting/finishing Building Information Modeling (BIM) Flooring Systems Roofing Systems 53

UK Construction Blog

JUNE 18, 2024

For this reason it is imperative that you have a scheduled programme of lift servicing and maintenance. The number of floors it operates over Throughout the entirety of its lifespan it is important to have your lift routinely inspected as well as implementing a programme of preventative lift maintenance.

Lifts 62

Lifts Heavy Lifting Transportation Land Use Regulations Safety Regulations 62

Revit OpEd

APRIL 13, 2012

Actually same every year Oh and AU 2010 And the list goes on. Comments: Comments are moderated to manage spamming. Missing Foreword for Introducing Revit 2010. Delete Sheets In Browser or Schedules. Wall Floor Interaction and Linked Models. ► 2010. ► December 2010. (30). Labels: Dept.

Building Information Modeling (BIM) 56

Building Information Modeling (BIM) Architecture Schedule Management Flooring Systems 56

Revit OpEd

APRIL 11, 2012

Wall Floor Interaction and Linked Models. The wall continues past the floor as if it isnt there. I should mention that this works the other direction too, since the reveal is part of the wall it will leave a "hollow" space for the structural models floor slab to occupy. Labels: Collaboration , Floors , Linked Files , Walls.

Building Information Modeling (BIM) 53

Building Information Modeling (BIM) Wall Systems Project Management Consulting Flooring Systems 53

Revit OpEd

APRIL 19, 2012

System families have a Function setting. Thats true for Walls, Floor, Roofs and Ceilings. Comments: Comments are moderated to manage spamming. Missing Foreword for Introducing Revit 2010. Delete Sheets In Browser or Schedules. Wall Floor Interaction and Linked Models. ► 2010. ► May 2010.

Building Information Modeling (BIM) 53

Building Information Modeling (BIM) Wall Systems Flooring Systems Ceiling Systems 53

Revit OpEd

APRIL 9, 2012

Make a system type parameter into an instance parameter, select dimension with a label in view, check instance parameter in option bar. Comments: Comments are moderated to manage spamming. Missing Foreword for Introducing Revit 2010. Delete Sheets In Browser or Schedules. Wall Floor Interaction and Linked Models.

Building Information Modeling (BIM) 72

Building Information Modeling (BIM) Project Management Consulting Change Management Wall Systems 72

Revit OpEd

APRIL 3, 2012

Comments: Comments are moderated to manage spamming. Missing Foreword for Introducing Revit 2010. Delete Sheets In Browser or Schedules. Wall Floor Interaction and Linked Models. ► 2010. ► December 2010. (30). ► November 2010. (31). ► October 2010. (30). Egress Paths.

Building Information Modeling (BIM) 56

Building Information Modeling (BIM) Site Planning Architecture Schedule Management 56

Revit OpEd

APRIL 11, 2012

Comments: Comments are moderated to manage spamming. Missing Foreword for Introducing Revit 2010. Delete Sheets In Browser or Schedules. Wall Floor Interaction and Linked Models. ► 2010. ► December 2010. (30). ► November 2010. (31). ► October 2010. (30). Egress Paths.

Building Information Modeling (BIM) 56

Building Information Modeling (BIM) Architecture Schedule Management Flooring Systems 56

Revit OpEd

APRIL 23, 2012

Comments: Comments are moderated to manage spamming. Missing Foreword for Introducing Revit 2010. Delete Sheets In Browser or Schedules. Wall Floor Interaction and Linked Models. ► 2010. ► December 2010. (30). ► November 2010. (31). ► October 2010. (30). Egress Paths.

Building Information Modeling (BIM) 63

Building Information Modeling (BIM) Architecture Schedule Management Flooring Systems 63

Revit OpEd

JUNE 13, 2012

They were however using them for the room finish schedules. Area plans could help document such things but then floor plans would be "ignorant" of what these kinds of "areas" are, no tagging possible, just "dumb text". A zone would wrap up the spaces that are served by a single system as you described. ► 2010.

Building Information Modeling (BIM) 76

Building Information Modeling (BIM) Zoning HVAC Systems Wall Systems 76

Revit OpEd

APRIL 3, 2012

That was done purposely so they dont show up in door or window category schedules. Comments: Comments are moderated to manage spamming. Missing Foreword for Introducing Revit 2010. Delete Sheets In Browser or Schedules. Wall Floor Interaction and Linked Models. ► 2010. ► December 2010. (30).

Building Information Modeling (BIM) 53

Building Information Modeling (BIM) Architecture Schedule Management Electrical Systems 53

Revit OpEd

APRIL 12, 2012

Comments: Comments are moderated to manage spamming. Missing Foreword for Introducing Revit 2010. Delete Sheets In Browser or Schedules. Wall Floor Interaction and Linked Models. ► 2010. ► December 2010. (30). ► November 2010. (31). ► October 2010. (30). Egress Paths.

Building Information Modeling (BIM) 56

Building Information Modeling (BIM) Architecture Schedule Management Flooring Systems 56

Revit OpEd

MAY 15, 2012

This means you can create your own versions of floor plans according to discipline or perhaps design phase. Tip: Theyve added View Template to the available fields in View Lists (schedule) so it can be managed there too. Comments: Comments are moderated to manage spamming. Missing Foreword for Introducing Revit 2010.

Site Planning 58

Site Planning Project Management Consulting Change Management Architecture 58

Revit OpEd

MARCH 31, 2012

It makes it easier to keep certain sections (details/wall sections) and elevations (interior) off of overall floor plan views for example. Related to this is the notion that there are representations that wed like to control for floor plan orientation and offer a different appear for the reflected ceiling plan (RCP) version.

Project Management Consulting 53

Project Management Consulting Site Planning Building Controls Flooring Systems 53

Revit OpEd

APRIL 24, 2012

Complimentary scheduled transfers are available from Sydney city and Sydney Domestic Airport. Comments: Comments are moderated to manage spamming. Missing Foreword for Introducing Revit 2010. Delete Sheets In Browser or Schedules. Wall Floor Interaction and Linked Models. ► 2010. ► August 2010.

Building Information Modeling (BIM) 53

Building Information Modeling (BIM) Site Planning Architecture Schedule Management 53

Revit OpEd

APRIL 16, 2012

Comments: Comments are moderated to manage spamming. Missing Foreword for Introducing Revit 2010. Delete Sheets In Browser or Schedules. Wall Floor Interaction and Linked Models. ► 2010. ► December 2010. (30). ► November 2010. (31). ► October 2010. (30). Egress Paths.

Building Information Modeling (BIM) 53

Building Information Modeling (BIM) Architecture Structural Systems Schedule Management 53

Revit OpEd

APRIL 24, 2012

Comments: Comments are moderated to manage spamming. Missing Foreword for Introducing Revit 2010. Delete Sheets In Browser or Schedules. Wall Floor Interaction and Linked Models. ► 2010. ► December 2010. (30). ► November 2010. (31). ► October 2010. (30). Egress Paths.

Building Information Modeling (BIM) 53

Building Information Modeling (BIM) Architecture Schedule Management Flooring Systems 53

Revit OpEd

APRIL 2, 2012

I wrote about about one of these Reviteristics in April 2010. To make matters a bit more confusing Revit treats this curtain wall panel, pretending to be a door, as a door in schedules and in Visibility/Graphics. Comments: Comments are moderated to manage spamming. Missing Foreword for Introducing Revit 2010. Parameters.

Wall Systems 49

Wall Systems Building Information Modeling (BIM) Schedule Management Architecture 49

Revit OpEd

APRIL 12, 2012

Comments: Comments are moderated to manage spamming. Missing Foreword for Introducing Revit 2010. Delete Sheets In Browser or Schedules. Wall Floor Interaction and Linked Models. ► 2010. ► December 2010. (30). ► November 2010. (31). ► October 2010. (30). Egress Paths.

Building Information Modeling (BIM) 56

Building Information Modeling (BIM) Architecture Wall Systems Schedule Management 56

Revit OpEd

APRIL 13, 2012

Comments: Comments are moderated to manage spamming. Missing Foreword for Introducing Revit 2010. Delete Sheets In Browser or Schedules. Wall Floor Interaction and Linked Models. ► 2010. ► December 2010. (30). ► November 2010. (31). ► October 2010. (30). Egress Paths.

Building Information Modeling (BIM) 56

Building Information Modeling (BIM) Project Management Consulting Architecture Schedule Management 56

Revit OpEd

APRIL 5, 2012

The first book is Mastering Autodesk Revit Structure 2010 (Wiley/Sybex). I wrote the foreword for the 2010 version and then contributed to 2011 and 2012. You know, looking at my bookshelf, I have every year of Revit since 2010 represented but I doubt I will purchase a 2013 book this year. Delete Sheets In Browser or Schedules.

Building Information Modeling (BIM) 53

Building Information Modeling (BIM) Architecture Structural Systems Building Materials 53

Revit OpEd

APRIL 20, 2012

Comments: Comments are moderated to manage spamming. Missing Foreword for Introducing Revit 2010. Delete Sheets In Browser or Schedules. Wall Floor Interaction and Linked Models. ► 2010. ► December 2010. (30). ► November 2010. (31). ► October 2010. (30). Egress Paths.

Building Information Modeling (BIM) 49

Building Information Modeling (BIM) Surveying Project Management Consulting Architecture 49

Revit OpEd

APRIL 17, 2012

But, project schedule, user experience, and maybe team management can stand in the way anticipating this and making good flexible families. We created template families that align to our schedules, and have a few parameters set, like height, width, and length. Comments: Comments are moderated to manage spamming.

Building Information Modeling (BIM) 56

Building Information Modeling (BIM) Project Management Consulting Change Management Schedule Management 56

Building Information Management

JULY 2, 2012

Open information exchange of Heating, Ventilating and Cooling systems (HVACie), released by the Engineer Research and Development Center for public review. HVACie extends the existing Industry Foundation Class Coordination View including equipment and system information streamlining construction shop drawing and fabrication.

HVAC Systems 40

HVAC Systems HVAC System Installation Building Information Modeling (BIM) Construction Equipment 40

Building Information Management

JULY 2, 2012

Open information exchange of Heating, Ventilating and Cooling systems (HVACie), released by the Engineer Research and Development Center for public review. HVACie extends the existing Industry Foundation Class Coordination View including equipment and system information streamlining construction shop drawing and fabrication.

HVAC Systems 40

HVAC Systems HVAC System Installation Building Information Modeling (BIM) Construction Equipment 40

Business Facilities

OCTOBER 11, 2017

Our factory floor is designed to allow them to test manufacturing technology and solutions and illustrate that end-to-end digitization in action.”. King, Managing Director of the Quonset Development Corporation. workers with the skills required for digital manufacturing jobs. Photo: Matthew Benham).

Heavy Equipment Manufacturing 56

Heavy Equipment Manufacturing Building Materials Manufacturing Real Estate Development Infrastructure Development 56

Business Facilities

OCTOBER 12, 2016

These skilled craftsmen, technicians, designers, planners, researchers, engineers and managers will be in high demand: over the next decade, we will need to fill nearly 3.5 Over the last five years (2010 to 2015), Tennessee has posted the second largest increase among Southeast states for manufacturing GDP growth, which reached $51.1

Building Materials Manufacturing 96

Building Materials Manufacturing Controls Manufacturing Building Products Distribution Facility Management 96

Building Information Management

JUNE 22, 2012

The core competencies identified include competencies relating to building operations and maintenance, energy management, sustainability, water efficiency, safety (including electrical safety) and building performance measures. We modified the energy job task analyses to include facilities operations and management activities.

Building Performance Measurement 45

Building Performance Measurement Fire Protection System Installation Renewable Energy Systems Fire Protection Systems 45

Construction Daily News

AUGUST 9, 2023

The first two phases updated building systems, improved entrances, and seismically retrofitted office wings. In addition to seismic and safety enhancements, including sprinkler systems, the third phase will contain four hearing rooms, a café, and lobbyist and journalist work spaces. Project managers estimated a six-month delay.

Public Works 52

Public Works Budgeting Fire Protection Systems Approvals 52