Revit OpEd

JULY 6, 2012

For readers that are already familiar with the Point Known PKNail site measuring system it appears to be similar, at least in concept. Missing Foreword for Introducing Revit 2010. Reference Planes and Wall Closure. ► 2010. ► December 2010. (30). ► November 2010. (31). ► August 2010.

Ceiling Systems 74

Ceiling Systems Architecture Wall Systems Electrical Systems 74

Natural Building

APRIL 4, 2011

Published in 2010, Adobe Homes for All Climates: Simple, Affordable, and Earthquake-Resistant Natural Building Techniques , by Lisa Schroder and Vince Ogletree presents a comprehensive look at how one might go about building with adobe. One of the more unique aspects of their system is the use of specialized molds for fabricating the blocks.

Green Building 76

Green Building Sustainability Architecture Wall Systems 76

Revit OpEd

JUNE 11, 2012

Detail Level Ignored with Unlocked Wall Layers. We can unlock a layer or layers in a wall to allow "pulling" them up or down separately from the rest of a wall. of Subtle , Detail Level , Walls. Could it be that the wall is not being cut in the ceiling plan view and the multiple lines are actually projection lines?

Wall Systems 56

Wall Systems Ceiling Systems Site Planning Project Management Consulting 56

Revit OpEd

APRIL 14, 2012

Revit 2010 Local Files. Workset Visibility in Linked Files (2010). Missing Foreword for Introducing Revit 2010. Wall Floor Interaction and Linked Models. ► 2010. ► December 2010. (30). ► November 2010. (31). ► October 2010. (30). ► September 2010. (24).

Building Information Modeling (BIM) 74

Building Information Modeling (BIM) Architecture Schedule Management Risk Management 74

Revit OpEd

APRIL 2, 2012

I wrote about about one of these Reviteristics in April 2010. That post is about Openings and this one is about curtain wall panel doors. When people first make a curtain wall that is supposed to get a door they quite naturally assume the door tool is the right place to start. A curtain wall door is really a curtain wall panel.

Wall Systems 49

Wall Systems Building Information Modeling (BIM) Schedule Management Architecture 49

Revit OpEd

JUNE 13, 2012

If room separation lines are "off the table" then the architect would end up using something else like actual walls and hiding them. When we unload a workset the walls are still there and that means so are Room Separation lines. A zone would wrap up the spaces that are served by a single system as you described. at 10:32 PM.

Building Information Modeling (BIM) 76

Building Information Modeling (BIM) Zoning HVAC Systems Wall Systems 76

Revit OpEd

JUNE 12, 2012

Using that method in conjunction with key to select ALL the walls, you can get a VERY quick SF. The downside is that is uses the wall's centerline. Missing Foreword for Introducing Revit 2010. Detail Level Ignored with Unlocked Wall Layers. ► 2010. ► December 2010. (30). ► July 2010. (14).

Flooring Systems 65

Flooring Systems Property Management Wall Systems Architecture 65

Revit OpEd

APRIL 4, 2012

Missing Foreword for Introducing Revit 2010. Wall Floor Interaction and Linked Models. ► 2010. ► December 2010. (30). ► November 2010. (31). ► October 2010. (30). ► September 2010. (24). ► August 2010. (24). ► July 2010. (14). ► May 2010.

Building Information Modeling (BIM) 71

Building Information Modeling (BIM) Architecture Schedule Management Painting/finishing 71

BD+C

NOVEMBER 4, 2013

2010 as adopted by the 2012 International Energy Conservation Code (IECC). With the goal of reducing energy consumption, this will require increased use of continuous insulation in most commercial wall assemblies in nearly all climate zones in the U.S. Building Enclosure Systems Building Materials' Exclude Content: Yes.

Energy Efficiency 49

Energy Efficiency Building Code Compliance Energy Conservation Wall Systems 49

Revit OpEd

APRIL 19, 2012

System families have a Function setting. Thats true for Walls, Floor, Roofs and Ceilings. I run into wall types quite often that have these wrong or inconsistently applied. Missing Foreword for Introducing Revit 2010. Wall Floor Interaction and Linked Models. ► 2010. ► December 2010. (30).

Building Information Modeling (BIM) 53

Building Information Modeling (BIM) Wall Systems Flooring Systems Ceiling Systems 53

Revit OpEd

JULY 20, 2012

Improves stability when selecting a new host for an element within an In-place Wall. Improves creation consistency with Physical Wall when coping an Analytical Model Wall. Improves stability when splitting pipes which belong to different systems. Missing Foreword for Introducing Revit 2010. ► 2010.

Piping Installation 61

Piping Installation Building Information Modeling (BIM) Project Management Consulting Structural Systems 61

Revit OpEd

JULY 5, 2012

It offers a Curtain Grid Manager that controls both panels and grids now, offers a preview of the system as well as helping to distinguish between vertical and horizontal orientations. Missing Foreword for Introducing Revit 2010. Reference Planes and Wall Closure. ► 2010. ► December 2010. (30).

Ceiling Systems 63

Ceiling Systems Architecture Schedule Management Wall Systems 63

Revit OpEd

APRIL 6, 2012

Missing Foreword for Introducing Revit 2010. Wall Floor Interaction and Linked Models. ► 2010. ► December 2010. (30). ► November 2010. (31). ► October 2010. (30). ► September 2010. (24). ► August 2010. (24). ► July 2010. (14). ► May 2010.

Building Information Modeling (BIM) 74

Building Information Modeling (BIM) Project Management Consulting Architecture Project Management 74

Revit OpEd

APRIL 11, 2012

Wall Floor Interaction and Linked Models. When we have architecture and structure in separate Revit models we end up with somewhat clumsy graphics in wall sections. The wall continues past the floor as if it isnt there. Labels: Collaboration , Floors , Linked Files , Walls. Missing Foreword for Introducing Revit 2010.

Building Information Modeling (BIM) 53

Building Information Modeling (BIM) Wall Systems Project Management Consulting Flooring Systems 53

Revit OpEd

MARCH 30, 2012

Missing Foreword for Introducing Revit 2010. Party Wall Doors. ► 2010. ► December 2010. (30). ► November 2010. (31). ► October 2010. (30). ► September 2010. (24). ► August 2010. (24). ► July 2010. (14). ► June 2010. (12).

Project Management Consulting 66

Project Management Consulting Architecture Permits Schedule Management 66

Revit OpEd

APRIL 13, 2012

Actually same every year Oh and AU 2010 And the list goes on. Missing Foreword for Introducing Revit 2010. Wall Floor Interaction and Linked Models. ► 2010. ► December 2010. (30). ► November 2010. (31). ► October 2010. (30). ► September 2010. (24). Labels: Dept.

Building Information Modeling (BIM) 56

Building Information Modeling (BIM) Architecture Schedule Management Flooring Systems 56

Revit OpEd

MARCH 30, 2012

Missing Foreword for Introducing Revit 2010. Party Wall Doors. ► 2010. ► December 2010. (30). ► November 2010. (31). ► October 2010. (30). ► September 2010. (24). ► August 2010. (24). ► July 2010. (14). ► June 2010. (12).

Project Management Consulting 65

Project Management Consulting Schedule Management Architecture Property Management 65

Revit OpEd

APRIL 9, 2012

Such as nesting families, Variable swing features 2d/3d, Alignment for adjacent walls and creating a variable multi-lite panel. Make a system type parameter into an instance parameter, select dimension with a label in view, check instance parameter in option bar. Missing Foreword for Introducing Revit 2010. ► 2010.

Building Information Modeling (BIM) 72

Building Information Modeling (BIM) Project Management Consulting Change Management Wall Systems 72

Revit OpEd

JUNE 8, 2012

Missing Foreword for Introducing Revit 2010. Detail Level Ignored with Unlocked Wall Layers. ► 2010. ► December 2010. (30). ► November 2010. (31). ► October 2010. (30). ► September 2010. (24). ► August 2010. (24). ► July 2010. (14). ► 2010.

Electrical Systems 58

Electrical Systems Architecture Wall Systems Structural Systems 58

BDC Network

JUNE 5, 2023

Ground was broken on the project in 2010, and the first patients were transferred from the old facility to the new one in the summer of 2015. The material was fabricated by NOW Specialties using their NOW 3100 route-and-return dry system.

Sustainability 105

Sustainability Building Materials Building Design Wall Systems 105

Revit OpEd

JULY 24, 2012

Another "inside" gem from Inside the System which offers deeper insight to how the numbers work. Missing Foreword for Introducing Revit 2010. Reference Planes and Wall Closure. ► 2010. ► December 2010. (30). ► November 2010. (31). ► October 2010. (30). ► September 2010.

Electrical Systems 53

Electrical Systems Ceiling Systems Architecture Wall Systems 53

Revit OpEd

APRIL 23, 2012

Missing Foreword for Introducing Revit 2010. Wall Floor Interaction and Linked Models. ► 2010. ► December 2010. (30). ► November 2010. (31). ► October 2010. (30). ► September 2010. (24). ► August 2010. (24). ► July 2010. (14). ► May 2010.

Building Information Modeling (BIM) 63

Building Information Modeling (BIM) Architecture Schedule Management Flooring Systems 63

Revit OpEd

MARCH 30, 2012

Missing Foreword for Introducing Revit 2010. Party Wall Doors. ► 2010. ► December 2010. (30). ► November 2010. (31). ► October 2010. (30). ► September 2010. (24). ► August 2010. (24). ► July 2010. (14). ► June 2010. (12).

Building Information Modeling (BIM) 58

Building Information Modeling (BIM) Project Management Consulting Architecture Schedule Management 58

Revit OpEd

APRIL 3, 2012

Missing Foreword for Introducing Revit 2010. Wall Floor Interaction and Linked Models. ► 2010. ► December 2010. (30). ► November 2010. (31). ► October 2010. (30). ► September 2010. (24). ► August 2010. (24). ► July 2010. (14). ► May 2010.

Building Information Modeling (BIM) 56

Building Information Modeling (BIM) Site Planning Architecture Schedule Management 56

Revit OpEd

APRIL 11, 2012

Missing Foreword for Introducing Revit 2010. Wall Floor Interaction and Linked Models. ► 2010. ► December 2010. (30). ► November 2010. (31). ► October 2010. (30). ► September 2010. (24). ► August 2010. (24). ► July 2010. (14). ► May 2010.

Building Information Modeling (BIM) 56

Building Information Modeling (BIM) Architecture Schedule Management Flooring Systems 56

Revit OpEd

JULY 30, 2012

Missing Foreword for Introducing Revit 2010. Reference Planes and Wall Closure. ► 2010. ► December 2010. (30). ► November 2010. (31). ► October 2010. (30). ► September 2010. (24). ► August 2010. (24). ► July 2010. (14). ► June 2010. (12).

Architecture 56

Architecture Ceiling Systems Schedule Management Wall Systems 56

Revit OpEd

JUNE 14, 2012

Missing Foreword for Introducing Revit 2010. Detail Level Ignored with Unlocked Wall Layers. ► 2010. ► December 2010. (30). ► November 2010. (31). ► October 2010. (30). ► September 2010. (24). ► August 2010. (24). ► July 2010. (14). ► 2010.

Surveying 72

Surveying Building Information Modeling (BIM) Project Management Consulting Architecture 72

Revit OpEd

APRIL 25, 2012

We can also create rooms and areas in a schedule view before there are any walls or boundaries available to define where they should go. Missing Foreword for Introducing Revit 2010. Wall Floor Interaction and Linked Models. ► 2010. ► December 2010. (30). ► November 2010. (31). ► 2009.

Building Information Modeling (BIM) 56

Building Information Modeling (BIM) Schedule Management Project Management Consulting Site Planning 56

Revit OpEd

APRIL 12, 2012

Missing Foreword for Introducing Revit 2010. Wall Floor Interaction and Linked Models. ► 2010. ► December 2010. (30). ► November 2010. (31). ► October 2010. (30). ► September 2010. (24). ► August 2010. (24). ► July 2010. (14). ► May 2010.

Building Information Modeling (BIM) 56

Building Information Modeling (BIM) Architecture Schedule Management Flooring Systems 56

Revit OpEd

MARCH 31, 2012

It makes it easier to keep certain sections (details/wall sections) and elevations (interior) off of overall floor plan views for example. Missing Foreword for Introducing Revit 2010. Party Wall Doors. ► 2010. ► December 2010. (30). ► November 2010. (31). ► October 2010. (30).

Project Management Consulting 53

Project Management Consulting Site Planning Building Controls Flooring Systems 53

Revit OpEd

APRIL 10, 2012

Missing Foreword for Introducing Revit 2010. Wall Floor Interaction and Linked Models. ► 2010. ► December 2010. (30). ► November 2010. (31). ► October 2010. (30). ► September 2010. (24). ► August 2010. (24). ► July 2010. (14). ► May 2010.

Painting/finishing 53

Painting/finishing Building Information Modeling (BIM) Flooring Systems Roofing Systems 53

Revit OpEd

JULY 18, 2012

Missing Foreword for Introducing Revit 2010. Reference Planes and Wall Closure. ► 2010. ► December 2010. (30). ► November 2010. (31). ► October 2010. (30). ► September 2010. (24). ► August 2010. (24). ► July 2010. (14). ► June 2010. (12).

Ceiling Systems 53

Ceiling Systems Architecture Schedule Management Wall Systems 53

Revit OpEd

AUGUST 8, 2012

Reference Planes and Wall Closure. Missing Foreword for Introducing Revit 2010. ► 2010. ► December 2010. (30). ► November 2010. (31). ► October 2010. (30). ► September 2010. (24). ► August 2010. (24). ► July 2010. (14). ► June 2010. (12).

Architecture 53

Architecture Building Standards Wall Systems Structural Systems 53

Revit OpEd

APRIL 12, 2012

They currently offer a variety of chairs, sofas, couches, tables, beds, fans, lights, dining-ware, vases, wall accessories and a dynamic flexible outdoor pergola. Missing Foreword for Introducing Revit 2010. Wall Floor Interaction and Linked Models. ► 2010. ► December 2010. (30). ► October 2010.

Building Information Modeling (BIM) 56

Building Information Modeling (BIM) Architecture Wall Systems Schedule Management 56

Revit OpEd

APRIL 3, 2012

Missing Foreword for Introducing Revit 2010. Wall Floor Interaction and Linked Models. ► 2010. ► December 2010. (30). ► November 2010. (31). ► October 2010. (30). ► September 2010. (24). ► August 2010. (24). ► July 2010. (14). ► May 2010.

Building Information Modeling (BIM) 53

Building Information Modeling (BIM) Architecture Schedule Management Electrical Systems 53

Revit OpEd

APRIL 16, 2012

Missing Foreword for Introducing Revit 2010. Wall Floor Interaction and Linked Models. ► 2010. ► December 2010. (30). ► November 2010. (31). ► October 2010. (30). ► September 2010. (24). ► August 2010. (24). ► July 2010. (14). ► May 2010.

Building Information Modeling (BIM) 53

Building Information Modeling (BIM) Architecture Structural Systems Schedule Management 53

Revit OpEd

APRIL 24, 2012

Missing Foreword for Introducing Revit 2010. Wall Floor Interaction and Linked Models. ► 2010. ► December 2010. (30). ► November 2010. (31). ► October 2010. (30). ► September 2010. (24). ► August 2010. (24). ► July 2010. (14). ► May 2010.

Building Information Modeling (BIM) 53

Building Information Modeling (BIM) Architecture Schedule Management Flooring Systems 53