Revit OpEd

SEPTEMBER 12, 2012

The concept of View Discipline appeared with Revit Structure. It was meant to make it simple to alter the appearance of our model to be more in sync with what a structural engineer wants to see. So is it possible to show the ceiling grid and have the air terminal families show below the duct? ► 2011. Post a Comment.

Building Information Modeling (BIM) 55

Building Information Modeling (BIM) Site Planning Project Management Consulting HVAC Systems 55

Revit OpEd

JULY 25, 2012

A thread at AUGI that started in December 2011 described a situation that Panel Reports show some connected loads as "0". Any reference to Revit, Revit Architecture, Revit MEP or Revit Structure on this site is made acknowledging this ownership. Reference Planes and Wall Closure. Moving Ceiling Grid Pattern. ► 2011.

Schedule Management 53

Schedule Management Architecture Electrical Systems Ceiling Systems 53

Building Information Management

JULY 2, 2012

Open information exchange of Heating, Ventilating and Cooling systems (HVACie), released by the Engineer Research and Development Center for public review. HVACie extends the existing Industry Foundation Class Coordination View including equipment and system information streamlining construction shop drawing and fabrication.

HVAC Systems 40

HVAC Systems HVAC System Installation Building Information Modeling (BIM) Construction Equipment 40

Building Information Management

JULY 2, 2012

Open information exchange of Heating, Ventilating and Cooling systems (HVACie), released by the Engineer Research and Development Center for public review. HVACie extends the existing Industry Foundation Class Coordination View including equipment and system information streamlining construction shop drawing and fabrication.

HVAC Systems 40

HVAC Systems HVAC System Installation Building Information Modeling (BIM) Construction Equipment 40

Revit OpEd

JULY 30, 2012

Any reference to Revit, Revit Architecture, Revit MEP or Revit Structure on this site is made acknowledging this ownership. Reference Planes and Wall Closure. Moving Ceiling Grid Pattern. ► 2011. ► December 2011. (19). ► November 2011. (21). ► October 2011. (16). ► 2010.

Architecture 56

Architecture Ceiling Systems Schedule Management Wall Systems 56

Revit OpEd

JULY 17, 2012

Any reference to Revit, Revit Architecture, Revit MEP or Revit Structure on this site is made acknowledging this ownership. Reference Planes and Wall Closure. Moving Ceiling Grid Pattern. ► 2011. ► December 2011. (19). ► November 2011. (21). ► October 2011. (16). ► 2010.

Architecture 53

Architecture Ceiling Systems Schedule Management Wall Systems 53

Revit OpEd

MARCH 31, 2012

It makes it easier to keep certain sections (details/wall sections) and elevations (interior) off of overall floor plan views for example. Related to this is the notion that there are representations that wed like to control for floor plan orientation and offer a different appear for the reflected ceiling plan (RCP) version.

Project Management Consulting 53

Project Management Consulting Site Planning Building Controls Flooring Systems 53

Revit OpEd

APRIL 25, 2012

Rooms and areas can be deleted in model views like floor plans and ceiling plans. We can also create rooms and areas in a schedule view before there are any walls or boundaries available to define where they should go. Wall Floor Interaction and Linked Models. ► 2011. ► December 2011. (19).

Building Information Modeling (BIM) 56

Building Information Modeling (BIM) Schedule Management Project Management Consulting Site Planning 56

Revit OpEd

JULY 27, 2012

We're basically building the same product we built 75 years ago, with a few new systems stuck in there. Any reference to Revit, Revit Architecture, Revit MEP or Revit Structure on this site is made acknowledging this ownership. Reference Planes and Wall Closure. Moving Ceiling Grid Pattern. ► 2011.

Building Information Modeling (BIM) 58

Building Information Modeling (BIM) Change Management Schedule Management Building Materials Manufacturing 58

Building Information Management

JULY 20, 2012

Since the inception of the NBS National BIM Library in 2011 we have been laying the foundations for a robust library of quality BIM objects that are applicable to the UK construction industry. We have added a rich set of properties for construction and Facilities Management that are presented in a consistent and structured manner.

Building Information Modeling (BIM) 40

Building Information Modeling (BIM) Property Management Controls Manufacturing Ceiling Systems 40

Job Order Contracting

SEPTEMBER 12, 2018

Application: This standard applies to davits, structures typically used to lower things over an edge. Hinged Doors a) Inspect the frame and supporting structures. Examine structure and supports. Check for structural damage. Check for structural damage. This work should be scheduled prior to flushing system.

Maintenance 40

Maintenance Fire Protection System Installation Fire Protection Systems Electrical Wiring Installation 40

Revit OpEd

JULY 19, 2012

Reference Planes and Wall Closure. Control Wall’s Material Return. Layers) for the host wall in a project. Note the two “wall closure” parameters (shown below) need to be “locked” so they stay positive (in the correct direction) when the host wall thickness changes. ► 2011.

Wall Systems 72

Wall Systems Building Information Modeling (BIM) Project Management Consulting Site Planning 72

Building Information Management

JULY 26, 2012

GSA earned the highest rating in all categories in the 2011 sustainability scorecard released from the Office of Management and Budget (OMB). performance building rating system in the United States. Alliance Environmental & Natural Systems Utilities, LLC. Alternative Energy Systems. Living Machine Systems, L3C.

Environmental Consulting 55

Environmental Consulting Green Building Project Management Consulting Renewable Energy Systems 55

Revit OpEd

JUNE 13, 2012

If room separation lines are "off the table" then the architect would end up using something else like actual walls and hiding them. When we unload a workset the walls are still there and that means so are Room Separation lines. A zone would wrap up the spaces that are served by a single system as you described. at 10:32 PM.

Building Information Modeling (BIM) 76

Building Information Modeling (BIM) Zoning HVAC Systems Wall Systems 76