Revit OpEd

MARCH 30, 2012

Revit 2013 - Sunshine. Labels: Image , Revit 2013 , Visualization. Comments: Comments are moderated to manage spamming. Any reference to Revit, Revit Architecture, Revit MEP or Revit Structure on this site is made acknowledging this ownership. Revit 2013 - Sunshine. Revit 2013 - View References. Revit OpEd.

Project Management Consulting 66

Project Management Consulting Architecture Permits Schedule Management 66

Revit OpEd

SEPTEMBER 9, 2012

RTC AUS 2013 - Seeking Abstracts. Just to further getting the word out the Revit Technology Conference 2013 - Australasia is now accepting abstracts until Wednesday October 31, 2012. The abstracts requested, at this time, are ONLY for the conference in Auckland, New Zealand this year, May 16-18, 2013. Changing a Username.

Project Management Consulting 63

Project Management Consulting Architecture Change Management Structural Systems 63

Revit OpEd

MAY 15, 2012

Revit 2013 - View Types. Further, views can be tied to view templates and have changes to a view template take effect immediately in a view or many views. Tip: Theyve added View Template to the available fields in View Lists (schedule) so it can be managed there too. Labels: Revit 2013 , View Templates , Views.

Site Planning 58

Site Planning Project Management Consulting Change Management Architecture 58

Safety Services Company

NOVEMBER 6, 2013

The third most cited OSHA violation in 2013 was the construction regulation on scaffolding (1926.451). For example single-point and two-point adjustable suspended scaffolds need both a personal fall arrest system and a guardrail. Manage employees who erect, dismantle, moor, or alter scaffolds. Competent Person Duties.

Electrical Wiring Installation 48

Electrical Wiring Installation Inspection Structural Systems Electrical Systems 48

Safety Services Company

NOVEMBER 6, 2013

The third most cited OSHA violation in 2013 was the construction regulation on scaffolding (1926.451). For example single-point and two-point adjustable suspended scaffolds need both a personal fall arrest system and a guardrail. Manage employees who erect, dismantle, moor, or alter scaffolds. Competent Person Duties.

Electrical Wiring Installation 48

Electrical Wiring Installation Inspection Structural Systems Electrical Systems 48

Construction Daily News

SEPTEMBER 7, 2024

Improved infrastructure will lead to better traffic management and safety. The project is considered part of the Appalachian Development Highway System and aims to close a gap in the U.S. However, with the passage of Act 89 in 2013, Pennsylvania allocated substantial funds for transportation projects. 15 north-south corridor.

Environmental Impact Assessment 52

Environmental Impact Assessment Infrastructure Development Project Management Safety Regulations 52

Job Order Contracting

APRIL 30, 2022

Performance-centric reward system. Reduced project related cost growth per change order. management. Journal of Management in Engineering, 10(6), 26-29. management in the UK construction industry. Management, 6(3), 159-168. International Journal of Project Management, 25(4), 386-393. Akintoye, A.,

Collaboration 90

Collaboration Project Management Consulting Project Management Construction Management 90

Revit OpEd

MAY 8, 2012

Revit 2013 - Suppress Spaces in Dimensions. Revit 2013 changes the means to reduce the overall size of the text displayed in a dimension string, particularly noticeable to people using imperial units. Comments: Comments are moderated to manage spamming. Revit 2013 - Double Click a View Reference. Revit OpEd.

Project Management Consulting 53

Project Management Consulting Property Management Architecture Project Management 53

Revit OpEd

APRIL 3, 2012

Revit 2013 - Content Folders. As for other subtle library changes we will now find some categories separated by Internal and External, interesting language choice versus Interior and Exterior. Labels: content , News , Revit 2013. Comments: Comments are moderated to manage spamming. Beware the Double Click in Revit 2013.

Building Information Modeling (BIM) 53

Building Information Modeling (BIM) Architecture Schedule Management Electrical Systems 53

Building Information Management

DECEMBER 2, 2012

The fundamental day-to-day business processes of the Engineering, Construction, Owner, and Operations sector are changing. That said, major cultural change must occur in order to make significant progress. The efficient life-cycle management of the built environment will not happen until change management is accelerated.

Building Information Modeling (BIM) 45

Building Information Modeling (BIM) Integrated Project Delivery (IPD) Project Management Consulting Facility Management 45

Building Information Management

DECEMBER 2, 2012

The fundamental day-to-day business processes of the Engineering, Construction, Owner, and Operations sector are changing. That said, major cultural change must occur in order to make significant progress. The efficient life-cycle management of the built environment will not happen until change management is accelerated.

Building Information Modeling (BIM) 40

Building Information Modeling (BIM) Integrated Project Delivery (IPD) Project Management Consulting Facility Management 40

Building Information Management

OCTOBER 26, 2015

To meet their responsibilities as stakeholders of the built environment ( facilities and other built structures ), public sector owners need to have the ability to determine the number, total cost, and measure the performance of renovation, repair, maintenance, sustainability, and construction projects.

Property Management 45

Property Management Estimating Construction Management Structural Systems 45

Construction Daily News

MAY 25, 2023

The top ten OEMs are changing. National Science Foundation are building the ship R/V Taani to help scientists study critical issues like rapidly changing ocean conditions and human impacts on the marine environment. The world’s top 50 OEMs generated US$230.6 billion in revenue, 0.4% One new Yellow Table entry appeared last year.

Environmental Consulting 52

Environmental Consulting Controls Manufacturing Building Controls Building Materials Manufacturing 52

Autodesk Construction Cloud

NOVEMBER 2, 2021

Managing pandemic disruptions and getting projects over the finish line has required a well-tempered balance of leadership, creativity, and innovation to solve incredibly challenging problems. Senior BIM Manager. Prior to Amazon, he was the Senior BIM-VDC Manager at Schiavone Construction Co. Betsy Bice , Truebeck Construction.

Building Information Modeling (BIM) 52

Building Information Modeling (BIM) Project Management Consulting Integrated Project Delivery (IPD) Project Management 52

Building Information Management

APRIL 18, 2013

(source: OmniClass Development Committee Status Report – April 16, 2013). Table 14 review has begun with comparison of form-based aspects of other classification systems, including those used as references in the prior work on Table 14. These OmniClass Status Reports will be issued every few months through this review cycle.

Building Information Modeling (BIM) 40

Building Information Modeling (BIM) Property Management Facility Management Public Works 40

Revit OpEd

MARCH 30, 2012

Comments: Comments are moderated to manage spamming. Any reference to Revit, Revit Architecture, Revit MEP or Revit Structure on this site is made acknowledging this ownership. Revit 2013 - Sunshine. Revit 2013 - View References. Revit 2013 - Diameter Dimension. Kiwi Codes - Project Browser for 2013.

Building Information Modeling (BIM) 58

Building Information Modeling (BIM) Project Management Consulting Architecture Schedule Management 58

Contractors Liability Blog

JULY 21, 2022

Repair of structural damage of roof support system, but not construction or installation of a new roof support system. Extension of roof penetrations, vents, and drains on an existing structure, except electrical penetrations. Home Improvement is any permanent change to residential property, including roofs.

Roofing Systems 52

Roofing Systems Insurance Management General Contracting Specialty Contracting 52

Revit OpEd

MAY 16, 2012

Heres what it looks like with a right-click in Revit 2013. With Revit 2013 my view templates will adjust all those details as soon as I change the template, or at least they can if I set it up that way. Comments: Comments are moderated to manage spamming. Revit 2013 - Double Click a View Reference. Labels: Dept.

Project Management Consulting 65

Project Management Consulting Architecture Ceiling Systems Risk Management 65

Building Information Management

JUNE 5, 2014

A multi-dimensional tool, Building Information Modelling (BIM) involves generating a visual model of the building which also manages data about it, at the design stage, throughout the construction phase and during its working life. NBS National BIM Report 2013. What is BIM? Download report. IFC/COBie Report 2012. Download report.

Building Information Modeling (BIM) 51

Building Information Modeling (BIM) Building Materials Manufacturing Building Performance Measurement Facility Management 51

Revit OpEd

SEPTEMBER 12, 2012

The concept of View Discipline appeared with Revit Structure. It was meant to make it simple to alter the appearance of our model to be more in sync with what a structural engineer wants to see. When Mechanical is assigned Revit changes the nature of what plan and reflected plan mean. Plumbing - (new to 2013) Same as mechanical.

Building Information Modeling (BIM) 55

Building Information Modeling (BIM) Site Planning Project Management Consulting HVAC Systems 55

Revit OpEd

MARCH 31, 2012

Comments: Comments are moderated to manage spamming. Any reference to Revit, Revit Architecture, Revit MEP or Revit Structure on this site is made acknowledging this ownership. Revit 2013 - Sunshine. Revit 2013 - View References. Revit 2013 - Diameter Dimension. Kiwi Codes - Project Browser for 2013.

Project Management Consulting 53

Project Management Consulting Site Planning Building Controls Flooring Systems 53

Civil + Structural Engineer

MAY 1, 2023

Kyle Ahern is the Awards Manager at Zweig Group. Rising Stars in Multidisciplinary Engineering Stephen Dominguez, PE, SE Principal-in-Charge, Structural Engineering WT Group Hoffman Estates, IL Stephen Dominguez has built his career in the AEC industry on the foundations of project design, management, and professional development.

Public Works 264

Public Works Project Management Change Management Facility Management 264

Building Information Management

FEBRUARY 23, 2015

Life-cycle Management 101. BIM (Building Information Modeling) is the life-cycle management of the built environment supported by digital technology. effectively developing an asset lifecycle process and model from conception to facility management. The plan describes how BIM will be implemented and which goals will be pursued.

Building Information Modeling (BIM) 49

Building Information Modeling (BIM) Integrated Project Delivery (IPD) Project Management Lean Construction 49

Revit OpEd

APRIL 19, 2012

System families have a Function setting. If changed I suspect people would have less trouble deciding which function is appropriate. It cannot be that difficult of change to make for Autodesk either. What you are suggesting is a much bigger change. Comments: Comments are moderated to manage spamming. Labels: Dept.

Building Information Modeling (BIM) 53

Building Information Modeling (BIM) Wall Systems Flooring Systems Ceiling Systems 53

Revit OpEd

SEPTEMBER 3, 2012

Changing a Username. Youll have to manually change it if necessary. You can change your username before you open a local file but not after. You cant change your username until you close that file. Then you can create a new local file after changing the username. Comments: Comments are moderated to manage spamming.

Building Information Modeling (BIM) 72

Building Information Modeling (BIM) Project Management Consulting Change Management Architecture 72

Revit OpEd

APRIL 9, 2012

Change the scale of the view to make it easier to constrain, select geometry. Dont include parameters in families that dont change geometry, instead put them in project templates and apply them to the categories they affect. On a somewhat related note, is there a way to change or get rid of added object styles in a parent family?

Building Information Modeling (BIM) 72

Building Information Modeling (BIM) Project Management Consulting Change Management Wall Systems 72

Revit OpEd

APRIL 18, 2012

This means each project should have its own workset structure based on its own conditions. Grids - Structure. FFE NIC (by owner that may be easier to manage alone). Linked Files - Structure (Revit). If you reach for a workset to manage element visibilty you owe it to yourself to consider a deeper look at Filters.

Building Information Modeling (BIM) 65

Building Information Modeling (BIM) Project Management Consulting Flooring Systems Project Management 65

Stok

JUNE 26, 2018

After a long interview drought and a brief stint at a smoothie shop to pay the bills, I came across a Craigslist posting for a part time Office Manager/ Bookkeeper at stok. However, I luckily soon found my niche in developing internal systems for stok, of which we had next to none when I began. What projects were you working on?

Project Management Consulting 40

Project Management Consulting Change Management Sustainability Project Management 40

Revit OpEd

JULY 19, 2012

Daniel Stine wrote to let me know that his new Interior Design book is now available for 2013. These adjustments change the 3D model, not just the 2D plan-view. Comments: Comments are moderated to manage spamming. Revit 2013 Service Pack 1 Available. Thursday, July 19, 2012. Reference Planes and Wall Closure. Parameters.

Wall Systems 72

Wall Systems Building Information Modeling (BIM) Project Management Consulting Site Planning 72

Revit OpEd

JULY 27, 2012

The problems are with autodesk's management of the software and of the paying client base, who are always secondary to the shareholders. It's a cash-cow for autodesk's shareholders, so autodesk excretes a release every year, and move the icons all around (have you seen 2013?). These problems include: 1.It's The soluton?

Building Information Modeling (BIM) 58

Building Information Modeling (BIM) Change Management Schedule Management Building Materials Manufacturing 58

Revit OpEd

SEPTEMBER 4, 2012

The first button is effectively acknowledging the changed family but preserving values that we may have entered or altered in the project, they may be different from the original family. Ive seen confusion with this result in uncomfortable changes. This kind of change should have been done with the "first choice". Egress Paths.

Project Management Consulting 63

Project Management Consulting Change Management Architecture Project Management 63

Business Facilities

AUGUST 1, 2014

IBM Services Center: Baton Rouge will deliver technology services including application development, application management and system integration. Construction officially started on the $600-million facility in April 2013 and aircraft assembly is planned to begin in 2015, with a targeted 2016 delivery of its first A320 jetliner.

Building Materials Manufacturing 111

Building Materials Manufacturing Renewable Energy Systems Heavy Equipment Manufacturing Controls Manufacturing 111

Revit OpEd

APRIL 23, 2012

The problem with pinning it down is that as soon as I think Ive got it, I change it a little and then Revit doesnt complain about importing the file. Comments: Comments are moderated to manage spamming. Any reference to Revit, Revit Architecture, Revit MEP or Revit Structure on this site is made acknowledging this ownership.

Building Information Modeling (BIM) 63

Building Information Modeling (BIM) Architecture Schedule Management Flooring Systems 63

Revit OpEd

SEPTEMBER 26, 2012

Working with a client the last couple evenings I found a quirky condition with a column family that has a nested detail component to manage masking the way they like. Then I tried changing the column to use the Column Style settings: Slanted - Angle Driven and Slanted - End Point Driven. RTC AUS 2013 - Seeking Abstracts.

Project Management Consulting 63

Project Management Consulting Change Management Site Planning Architecture 63

Revit OpEd

SEPTEMBER 27, 2012

Note: Locked dimensions and their associated parameters cannot be changed in the drawing area. Use the Lock column in the Family Types dialog to change them.". I find that this part isnt true: "Note: Locked dimensions and their associated parameters cannot be changed in the drawing area. RTC AUS 2013 - Seeking Abstracts.

Project Management Consulting 66

Project Management Consulting Change Management Architecture Project Management 66

Revit OpEd

APRIL 25, 2012

That is intended to make it easier to place them elsewhere in the model without having to recreate them from scratch if their current location needs to be changed. Comments: Comments are moderated to manage spamming. Beware the Double Click in Revit 2013. Revit 2013 Downloads - Please Hold. Revit 2013 - Content Folders.

Building Information Modeling (BIM) 56

Building Information Modeling (BIM) Schedule Management Project Management Consulting Site Planning 56

Revit OpEd

MAY 1, 2012

Changing these settings is often enough. Comments: Comments are moderated to manage spamming. Any reference to Revit, Revit Architecture, Revit MEP or Revit Structure on this site is made acknowledging this ownership. Revit 2013 - Double Click a View Reference. Revit 2013 - View Types. Shared Coordinates.

Project Management Consulting 53

Project Management Consulting Architecture Ceiling Systems Risk Management 53