Remove 2015 Remove Building Codes Remove Flooring Systems
article thumbnail

AISI Publishes “Thermal Design and Code Compliance Guide for C-Shape Cold-Formed Steel Framing in Building Envelopes”

Civil + Structural Engineer

WASHINGTON, DC – The American Iron and Steel Institute (AISI) has published AISI D250-23, “Thermal Design and Code Compliance Guide for C-Shape Cold-Formed Steel Framing in Building Envelopes.” They will also be able to determine the level of performance in an energy code or high-performance rating system.

article thumbnail

Stay code-compliant with AISI’s thermal design guide

Construction Specifier

A cover photo of the main page of AISI D250-23, “Thermal Design and Code Compliance Guide for C-Shape Cold-Formed Steel Framing in Building Envelopes.” Designers and builders will find information on the specific thermal properties of materials and elements in a building envelope assembly to comply with a local or state-adopted code.

Insiders

Sign Up for our Newsletter

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

article thumbnail

Offsite vs. Onsite Construction Part 2

Civil + Structural Engineer

The benefits of offsite construction, which comprises the manufacturing, planning, design, fabrication, and assembly of building elements offsite are expansive. The panel of experts below, representing the construction, engineering, and building systems industries, explore and explain the many benefits of this alternative construction method.

article thumbnail

Exterior cavity fireblocking: Exceeding fire performance

Construction Specifier

and Steven Gaynor, MBA Photo courtesy Tenmat New York City recently became the first jurisdiction in the country to reject and rewrite major sections of the International Building Code’s ( IBC ’s) language around fire protection in exterior facades. For decades, buildings have relied on intumescent materials for fire control.

article thumbnail

SHARC Energy Announces 2022 Year End Financial Results

Civil + Structural Engineer

SHARC International Systems Inc. Furthermore, the Company earned lower margin on a higher percentage of Revenue where the Company acted as a general contractor managing the installation of a SHARC WET system. ” Pannu added, “We remain committed to our objective of building a strong sales pipeline.

article thumbnail

Failures: Beware of condensation in the attic

Construction Specifier

Severe and frequent condensation in this small condominium building has resulted in wood decay and mold growth, resulting in deterioration not just of the oriented strand board (OSB) roof deck but even the top chord of the wood truss. To prevent a build-up of moisture, the unconditioned attic space is vented to the exterior.

article thumbnail

Resilient Flooring: The sustainable specification

Construction Specifier

When specifying flooring, one should consider both sustainability and performance. These factors not only contribute to the sustainability of the flooring, but how it performs. The materiality of different resilient flooring products may alter some perceptions regarding sustainability. It is such a waste.