Civil + Structural Engineer

MAY 1, 2023

Additionally, the environmental impact is lessened due to minimal shipping and packing materials delivered to the site and enhanced energy efficiency in the final construction. A commercial example of this approach is best represented by a hotel chain located in Redondo Beach, California whose owner chose a modular system.

Building Materials Manufacturing 246

Building Materials Manufacturing Steel Fabrication Building Information Modeling (BIM) Modular Construction 246

Civil + Structural Engineer

OCTOBER 4, 2023

They will also be able to determine the level of performance in an energy code or high-performance rating system. Larson noted that AISI D250-23 is an update of the “Thermal Design Guide for Exterior Walls” originally published by AISI that was updated and revised in 2008 and 2015.

Building Code Compliance 130

Building Code Compliance Building Codes Building Design Energy Conservation 130

Construction Specifier

OCTOBER 10, 2023

They will also be able to determine the level of performance in an energy code or high-performance rating system. Larson notes AISI D250-23 is an update of the “Thermal Design Guide for Exterior Walls” originally published by AISI that was updated and revised in 2008 and 2015.

Building Code Compliance 116

Building Code Compliance Building Codes Energy Conservation Wall Systems 116

Civil + Structural Engineer

DECEMBER 1, 2023

It features elements that maximize the safety, security, and efficiency of the travel process including 100 percent automated screening lanes, 100 percent facial recognition “e-gates” for international departure, an innovative landside terminal design, and 100 percent trackable RFID Independent Carrier System.

Engineering 130

Engineering Fire Protection System Installation Fire Protection Systems Environmental Consulting 130

Construction Specifier

JULY 2, 2020

Low-slope and steep-slope unvented roof systems ( i.e. insulation and air barrier are applied directly to the underside of the roof deck) are common in applications where designers are seeking cost-effective and energy-efficient roof assemblies. insulation on the floor of the attic (Figure 1). Photo © BigStockPhoto.com.

Roofing Systems 52

Roofing Systems Building Codes Ceiling Systems HVAC System Installation 52

Construction Specifier

OCTOBER 12, 2021

When specifying flooring, one should consider both sustainability and performance. These factors not only contribute to the sustainability of the flooring, but how it performs. The materiality of different resilient flooring products may alter some perceptions regarding sustainability. It is such a waste.

Sustainability 52

Sustainability Building Resilience Flooring Systems Building Code Compliance 52

Construction Specifier

JUNE 25, 2024

Without the use of ventilated facades, designers face the challenge of creating exterior walls that effectively manage water over the building’s lifespan, while providing the thermal performance needed to meet energy requirements, such as those outlined in the New York City Energy Conservation Code ( NYCECC ) and NYC’s Local Law 97.

Fire Protection System Installation 59

Fire Protection System Installation Fire Protection Systems Building Code Compliance Building Codes 59