Civil + Structural Engineer

MAY 1, 2023

The benefits of offsite construction, which comprises the manufacturing, planning, design, fabrication, and assembly of building elements offsite are expansive. Additionally, the environmental impact is lessened due to minimal shipping and packing materials delivered to the site and enhanced energy efficiency in the final construction.

Building Materials Manufacturing 246

Building Materials Manufacturing Steel Fabrication Modular Construction Building Information Modeling (BIM) 246

Civil + Structural Engineer

JUNE 7, 2023

Located within the viewshed of the historic Moodna Viaduct, Schunnemunk Meadows was permanently protected by OSI in 2015, and transferred to OPRHP in 2018 as an addition to Schunnemunk State Park, with OSI managing the land through 2028. With private support, OSI was able to provide more than $15,000 for bridge materials and site preparation.

Engineering 246

Engineering Steel Fabrication Historic Preservation Environmental Impact Assessment 246

Civil + Structural Engineer

OCTOBER 2, 2023

The projects, which were also supported by the New York State Office of Parks, Recreation, and Historic Preservation (OPRHP) and the Palisades Interstate Park Commission (PIPC), require extensive coordination and planning. The site of the Schunnemunk Meadows bridge was permanently protected by OSI in 2015. Ledlie Klosky, Ph.D.,

Public Works 130

Public Works Steel Fabrication Historic Preservation Building Design 130

Civil + Structural Engineer

DECEMBER 1, 2023

The project’s location crosses a superfund site, which made special drainage measures–such as realigning the groundwater remediation system while ensuring the treatment facility experienced no downtime. Initially, the plan was to place loose rip-rap rock on the slope to prevent material sloughing.

Engineering 264

Engineering Concrete Pouring Plumbing Systems Structural Systems 264

Civil + Structural Engineer

DECEMBER 1, 2023

The project’s location crosses a superfund site, which made special drainage measures–such as realigning the groundwater remediation system while ensuring the treatment facility experienced no downtime. Initially, the plan was to place loose rip-rap rock on the slope to prevent material sloughing.

Engineering 130

Engineering Fire Protection System Installation Fire Protection Systems Environmental Consulting 130

Business Facilities

OCTOBER 12, 2016

percent annually from 2013 to 2015, outpacing the national average of 2.46 Haslam introduced the Tennessee Promise in 2015. More than 16,000 students enrolled in the Tennessee Promise for the fall of 2015. There has been an 81 percent retention rate among the 2015-2016 class of Tennessee Promise students.

Building Materials Manufacturing 96

Building Materials Manufacturing Controls Manufacturing Building Products Distribution Facility Management 96

Revit OpEd

APRIL 14, 2016

Autodesk released Revit 2016 R2 like they did with Revit 2015 the year before. Keep in mind that Shared Coordinates are still very relevant with respect to survey, site and landscape models and drawings. If required, they can also be replaced later with detailed steel connections created using an add-in (see next item).

Steel Fabrication 75

Steel Fabrication Schedule Management Piping Installation Wall Systems 75