Civil + Structural Engineer

OCTOBER 4, 2023

WASHINGTON, DC – The American Iron and Steel Institute (AISI) has published AISI D250-23, “Thermal Design and Code Compliance Guide for C-Shape Cold-Formed Steel Framing in Building Envelopes.” They will also be able to determine the level of performance in an energy code or high-performance rating system.

Building Code Compliance 130

Building Code Compliance Building Codes Building Design Energy Conservation 130

Construction Specifier

APRIL 7, 2025

Four types of roofing materials side-by-side: solar panels, metal roofing, asphalt shingles, and clay tiles. Leveraging his experience as a firefighter, Keeler described the common vulnerabilities in roofing materials that lead to home ignition during wildfires. Aluminum would be the primary roof covering which is a factor.

Roofing Systems 64

Roofing Systems Wall Systems Building Materials Structural Systems 64

The Pro Builder

APRIL 18, 2024

Combining Concrete and Offsite Manufacturing to Create Resilient Homes qpurcell Thu, 04/18/2024 - 12:53 Before it could build resilient , high-performing homes across the country, Onx Homes decided it first needed to prove it could do so in a challenging climate. This is not a theory. We have done it,” he says.

Building Materials Manufacturing 264

Building Materials Manufacturing Building Resilience Controls Manufacturing Building Materials 264

Construction Specifier

JANUARY 26, 2025

Photo courtesy Intertek As building codes and standards evolve, the demand for airtight, environmentally friendly building enclosures increases among building owners, insurers, and design professionals. Air barriers are essential for maintaining the integrity and performance of building enclosures.

Building Code Compliance 64

Building Code Compliance Building Performance Measurement HVAC System Installation Fire Protection System Installation 64

Civil + Structural Engineer

MAY 1, 2023

The benefits of offsite construction, which comprises the manufacturing, planning, design, fabrication, and assembly of building elements offsite are expansive. The panel of experts below, representing the construction, engineering, and building systems industries, explore and explain the many benefits of this alternative construction method.

Building Materials Manufacturing 246

Building Materials Manufacturing Steel Fabrication Building Information Modeling (BIM) Modular Construction 246

The Pro Builder

APRIL 22, 2023

Rather, it employed an off-site construction method that built all of the wall panels, floor panels, and roof trusses in a nearby factory and assembled them on site in fewer than three days. he was struck by an eerie silence. Although there was plenty of activity, the buzz of saws was noticeably absent.

Building Information Modeling (BIM) 246

Building Information Modeling (BIM) Modular Construction Building Materials Manufacturing Flooring Systems 246

The Pro Builder

SEPTEMBER 21, 2023

Department of Energy’s Home Energy Score (HES) , which assesses the energy efficiency of a home based on its structure and heating, cooling, and hot-water systems, has a greater influence on home sale prices across the country. The units also include a quick-hang bracket system, making one-person installation easier. 15 asphalt felt.

Energy Efficiency 246

Energy Efficiency HVAC System Installation Sustainability HVAC Systems 246

The Pro Builder

JANUARY 2, 2024

Their collaboration enables homeowners or builders to select from Hereabout’s list of preexisting, ready-to-use design plans, then build the home using B.PUBLIC’s prefab floor, roof, and wall panels. B.PUBLIC says its homes use 80% to 90% less energy to heat and cool than code-built homes. We don’t displace builders.

Building Performance Measurement 264

Building Performance Measurement Building Materials Manufacturing Modular Construction Building Codes 264

UK Construction Blog

MARCH 26, 2025

The post Top 10 Construction Defects: Prevent These Costly Building Mistakes appeared first on UK Construction Blog. The most dangerous defects include structural issues (foundation cracks, wall collapses), water infiltration, electrical/plumbing failures and HVAC system problems, which often remain hidden for years.

Electrical Wiring Installation 52

Electrical Wiring Installation HVAC System Installation Fire Protection System Installation Plumbing Systems 52

BD+C

JULY 17, 2014

That is the conclusion that New York-based nonprofit Urban Green Council found in their research on “high cholesterol buildings.”. Body Image: read more.

Green Building 102

Green Building Energy Efficiency HVAC Systems Masonry 102

CCR Magazine

DECEMBER 18, 2024

a leader in high-quality engineered metal building envelope systems, is proud to announce an expansion of its ICC approvals to include its innovative roof panels. This achievement makes it easier for our customers to trust and specify our systems with complete confidence. IMETCO (Innovative Metals Company, Inc.),

Building Code Compliance 52

Building Code Compliance Approvals Building Codes Roofing Systems 52

Civiconcepts

MARCH 4, 2021

The seismic force-resisting system in structural engineering is designed to resist lateral forces like earthquake shocks, and wind loads are called shear walls. Constructing the shear wall is described in the ‘international Building Code’ and ‘International Residential Code’. What Is a Shear Wall?…

Wall Systems 98

Wall Systems Roofing Systems Building Codes Flooring Systems 98

CCR Magazine

MARCH 12, 2025

Sterling Structural , a leading manufacturer of cost-effective, pre-fabricated mass timber and hybrid structural systems in North America, today announced the availability of a new Mass Timber Mock-up training kit. The kit includes everything needed to construct a mock-up of a small-scale mass timber building.

Structural Systems 52

Structural Systems Wall Systems Roofing Systems Building Materials Manufacturing 52

Construction Specifier

OCTOBER 10, 2023

A cover photo of the main page of AISI D250-23, “Thermal Design and Code Compliance Guide for C-Shape Cold-Formed Steel Framing in Building Envelopes.” Designers and builders will find information on the specific thermal properties of materials and elements in a building envelope assembly to comply with a local or state-adopted code.

Building Code Compliance 116

Building Code Compliance Building Codes Energy Conservation Wall Systems 116

The Pro Builder

NOVEMBER 13, 2023

The Lakewood Villages project, which consists of four buildings with a total of 96 apartments, in Palm Springs, Fla., 13, WPBF 25 reports, and uses a building system consisting of blocks that interlock much like toy Lego bricks. The blocks are even color coded to show the construction sequence and which pieces go where.

Building Resilience 130

Building Resilience Roofing Systems Flooring Systems Wall Systems 130

Construction Specifier

JANUARY 31, 2022

When installing a new or replacement low-slope roof, the right components can dramatically improve the system’s performance and longevity. Globally, buildings and the building construction sector are responsible for over one-third of total global energy consumption and nearly 40 percent of total direct and indirect CO 2 emissions.

Energy Efficiency 102

Energy Efficiency Roofing Systems Wall Systems Building Code Compliance 102

Construction Specifier

JUNE 20, 2024

1 The only exception noted in the code is for a coal tar based roof system. 1 The only exception noted in the code is for a coal tar based roof system. 1 One of the cardinal rules of roof design is to provide adequate slope for drainage of storm water off the roof. By Darrell L.

Roofing Systems 59

Roofing Systems Piping Installation Concrete Pouring Wall Systems 59

CCR Magazine

MARCH 26, 2025

Your roof is one of the most significant investments in your home, and keeping it in top shape can save you thousands in costly repairs or early replacement. While roofs are designed to withstand the elements, regular maintenance plays a crucial role in maximizing their lifespan. Use a gutter guard system to reduce buildup.

Maintenance 52

Maintenance Roofing Systems Inspection Structural Systems 52

Civil + Structural Engineer

NOVEMBER 1, 2023

After 80 years of continuous operation the building required significant upgrades to provide tenants with code compliant, state-of-the-art facilities and Class A office space. A building-wide life safety analysis determined that the two existing egress stairs were insufficient to meet the population based on current building codes.

Flooring Systems 130

Flooring Systems Building Code Compliance Structural Systems Roofing Systems 130

Construction Specifier

JULY 25, 2024

By Chadwick Collins Photo and illustrations courtesy Single Ply Roofing Industry (SPRI) An often-overlooked issue during new construction or a commercial renovation project is the addition of unwanted moisture into the structure. Typically, water vapor or moisture movement—called diffusion—travels from warm humid (i.e.

Roofing Systems 59

Roofing Systems Construction Management Concrete Pouring Wall Systems 59

Construction Specifier

JUNE 20, 2024

1 The only exception noted in the code is for a coal tar based roof system. 1 The only exception noted in the code is for a coal tar based roof system. 1 One of the cardinal rules of roof design is to provide adequate slope for drainage of storm water off the roof. By Darrell L.

Roofing Systems 52

Roofing Systems Piping Installation Concrete Pouring Building Codes 52

Construction Specifier

SEPTEMBER 1, 2022

Designers of new construction and renovation projects sometimes prefer to use exterior-grade waterproofing and roofing products (collectively referred to as “exterior-grade waterproofing” in this article) within interior space for improved performance compared to typical interior-grade waterproofing products. and 10.2.7.4)

Waterproofing Systems 105

Waterproofing Systems Fire Protection Systems Building Code Compliance Building Codes 105

Construction Specifier

OCTOBER 1, 2024

Curtain wall systems are ever present in today’s commercial construction marketplace. The architectural design of curtain walls must be developed alongside increasing demand for high-performing, energy-efficient solutions. Jackson, AIA Photo courtesy Simpson Gumpertz & Heger Inc.

Wall Systems 104

Wall Systems Fire Protection System Installation Project Management Consulting Steel Fabrication 104

BDC Network

SEPTEMBER 28, 2023

Structural engineering solutions for office-to-residential conversion 0 qpurcell Thu, 09/28/2023 - 10:37 Office Buildings IMEG's Edwin Dean, Joe Gulden, and Doug Sweeney, share seven key focuses for structural engineers when planning office-to-residential conversions. Steel or wood is generally easier to adapt in a conversion.

Engineering 105

Engineering Building Codes Structural Systems Flooring Systems 105

GCP Applied Technologies

JUNE 2, 2020

From the Roof to the Walls: How to Properly Waterproof Homes. Building for quality means building for all weather conditions. Moisture can be absorbed in various building materials and can cause a host of serious structural problems. Make sure to examine these three critical areas: Roofing. Phillip.fry@gc….

Roofing Systems 117

Roofing Systems Waterproofing Systems Wall Systems Building Materials 117

Civil + Structural Engineer

APRIL 13, 2023

The natural metal is fabricated and installed as façade and wall cladding systems, zinc roofs, roof drainage and gutters, and architectural details on commercial, institutional and residential projects across North America. and Canada Green Building Councils’ LEED® criteria.

Building Materials Manufacturing 130

Building Materials Manufacturing Renewable Energy Systems Building Materials Building Resilience 130

UK Construction Blog

MARCH 4, 2025

From simple DIY projects like painting walls in light colours to installing affordable storage solutions that maximise vertical space, you can create a functional, visually appealing extension of your living space. Create specific zones for tools, gardening equipment, sports gear and automotive supplies to establish a logical system.

Electrical Wiring Installation 52

Electrical Wiring Installation Material Storage Flooring Systems Ceiling Systems 52

The Pro Builder

OCTOBER 25, 2023

The New American Home (TNAH) 2023 not only showcases stunning design and views of the Las Vegas Valley but also serves as a model of high performance in home design, from the home's natural resource efficiencies and renewable energy systems to the healthy, comfortable indoor environment it provides for its owners.

Energy Efficiency 130

Energy Efficiency Renewable Energy Systems HVAC System Installation Sustainability 130

Civil + Structural Engineer

NOVEMBER 1, 2023

By Shannon Humbert, Legacy Building Solutions Rigid-frame fabric buildings offer a permanent solution for athletic facilities. For many entities, both public and private, the need for an athletics and recreation facility comes down to two options: A permanent brick and mortar building, or a lower-cost fabric bubble.

Steel Fabrication 130

Steel Fabrication HVAC System Installation Structural Systems Fire Protection System Installation 130

Construction Marketing

JANUARY 24, 2024

Mechanical and electrical engineers work on systems within buildings, such as heating, ventilation and air conditioning (HVAC) and electrical systems. Electricians Install, maintain, and repair electrical systems in buildings and construction sites. Ensure compliance with electrical codes and safety standards.

HVAC System Installation 133

HVAC System Installation Electrical Systems Building Code Compliance Structural Systems 133

BDC Network

JUNE 8, 2024

Sergio Sádaba, Principal Industrial Facilities Designers Lists HVAC Mechanical Systems For most industrial factories, it’s process over people. As a buildings-performance expert, I have decades of experience designing high-performance, sustainable, and energy-efficient systems for a variety of industrial clients.

Heavy Equipment Manufacturing 121

Heavy Equipment Manufacturing Fire Protection System Installation Building Materials Manufacturing HVAC System Installation 121

Construction Specifier

OCTOBER 31, 2023

Designed by the architecture firm, Brooks + Scarpa, this innovative project defies traditional apartment buildings by creating a welcoming cube design that prioritizes communal spaces with a courtyard which is open to the street. The mixed-use building features 279 m 2 (3,000 sf) of retail space and dedicates 12 units for low-income tenants.

Energy Efficiency 110

Energy Efficiency Flooring Systems Roofing Systems Building Materials 110

Civil + Structural Engineer

APRIL 20, 2023

BRONX, NY— Located in New York City’s South Bronx neighborhood of Mott Haven, the newly dedicated $175 million 425 Grand Concourse high-rise building serves as the largest Passive House project to date in North America. A principal tenet of Passive House design entails siting the building to optimize sun/heat exposure.

Concrete Pouring 130

Concrete Pouring Energy Efficiency Flooring Systems Structural Systems 130

BDC Network

JUNE 5, 2023

How to properly assess structural wind damage 0 dbarista Mon, 06/05/2023 - 16:17 Engineers Properly assessing wind damage can identify vulnerabilities in a building's design or construction, which could lead to future damage or loss, writes Matt Wagner, SE, Principal and Managing Director with Walter P Moore.

Building Code Compliance 98

Building Code Compliance Building Codes Insurance Management Property Management 98

Civil + Structural Engineer

JUNE 28, 2024

Eventually, California’s HSR system will link more than 800 miles of rail, by way of up to 24 stations. s historic rail station for use as the first component of the intermodal high-speed rail commuter station. s historic rail station for use as the first component of the intermodal high-speed rail commuter station.

Historic Preservation 100

Historic Preservation Fire Protection Systems Structural Systems Roofing Systems 100

BDC Network

MAY 29, 2024

Compelling Conversations: Panelized Walls for Multifamily Projects 1 kcichowicz Wed, 05/29/2024 - 10:37 Learn why a Colorado-based framing contractor favors panelized walls over traditional framing in APA’s Compelling Conversations. Ross Cohen explains why the company prefers panelized walls to other framing methods.

Wall Systems 105

Wall Systems Building Code Compliance Site Planning Quality Control 105

UK Construction Blog

FEBRUARY 19, 2025

Heres how you can do it right: Check the Structure Look for cracks in the walls or ceilings. Evaluate Plumbing and Electrical Systems Test all faucets and fixtures. Evaluate Plumbing and Electrical Systems Test all faucets and fixtures. Flickering lights or outdated systems might need immediate attention.

Electrical Wiring Installation 52

Electrical Wiring Installation Building Permits Painting/finishing Permits 52