Building Commissioning, Building Performance Measurement and Mapping

Fenestration and glazing: Seismic performance specification considerations

Construction Specifier

NOVEMBER 28, 2024

By Amy Becker Photo courtesy Fenestration and Glazing Industry Alliance (FGIA) Specifiers and design professionals should always consider seismic performance attributes for buildings in areas that previously have experienced the damaging effects of earthquakes. Building codes are adopted with the intent to preserve life and safety.

Building Performance Measurement

Building Performance Measurement Wall Systems Building Code Compliance Structural Systems

Why Pay Attention to HVAC Faults? System Performance Depends on It

The Pro Builder

SEPTEMBER 10, 2023

But while the efficiency of heating, ventilation, and air conditioning (HVAC) equipment has improved across the board, improper installation or commissioning can result in HVAC system faults that compromise HVAC performance and reduce energy efficiency. Department of Energy's (DOE) Building America program , points out.

HVAC Systems

HVAC Systems HVAC System Installation Renewable Energy Systems Energy Efficiency

Code Compliance & Beyond: Upping Baseline Building Energy Performance

Stok

AUGUST 28, 2019

Due to their embodied carbon and operational carbon footprints, buildings play a significant role in these efforts, so understanding the impact of legislation on buildings is critical. This directly translates to building energy codes. And, the result of this baseline? How to approach compliance.

Building Code Compliance

Building Code Compliance Building Codes Renewable Energy Systems Energy Efficiency

Everybody needs good NABERS – accommodating the new rating scheme in construction contracts

Practical Law Construction

JUNE 15, 2021

The NABERS UK system focuses on the energy efficiency of office buildings when they are in use, to gauge actual performance in a way that is comparable with similar buildings. The scheme seeks to close the existing gap between theoretical design-based energy performance and actual in-use energy performance.

Building Performance Measurement

Building Performance Measurement Contracts Energy Efficiency Project Management Consulting

95 Marginal Street: A Comprehensive Overview of Its Historical Significance

Construction Daily News

SEPTEMBER 8, 2024

This building serves as a focal point for ongoing revitalization efforts in the area, combining cultural heritage with modern developments. The Landmarks Preservation Commission played a crucial role in ensuring that the character of the district was maintained while adapting to modern needs.

Historic Preservation

Historic Preservation Real Estate Development Building Commissioning Building Design

Zweig Group’s 2024 Rising Stars In the AEC Industry

Civil + Structural Engineer

JUNE 10, 2024

a civil engineering firm focused on sanitary sewer systems, as a stop-gap measure until she could find a career more suited to her structural engineering ambition. With her educational background and personal focus on structural engineering, she accepted a position with RJN Group Inc.,

Project Management Consulting

Project Management Consulting Public Works Environmental Impact Assessment Project Management

30 New Autodesk Build Releases You Should Know

Autodesk Construction Cloud

SEPTEMBER 20, 2022

We’re also excited to share some of our latest and greatest updates for Autodesk Build today. . Cost Management | Performance Tracking* . Document Management | Reality Capture Models | ReCap . *=features in both Autodesk Build & BIM 360? ?. Cost Management | Performance Tracking* . Highlighted Releases.

Building Information Modeling (BIM)

Building Information Modeling (BIM) Schedule Management Closeout Change Management

Public Law 111-308 – Federal Buildings Personnel Training Act – FBPTA – Recommend Training

Building Information Management

JUNE 25, 2012

Fede ral Buildings Personnel Training Act. In accordance with the Federal Buildings Personnel Training Act 2010 (FBPTA), the below curriculum is recommended relating to facility. performance buildings. . Achieving this level of performance requires a government-?wide Curriculum -?

Integrated Project Delivery (IPD)

Integrated Project Delivery (IPD) Facility Management Project Management Consulting Building Performance Measurement

Public Law 111-308 – Federal Buildings Personnel Training Act – FBPTA – Recommend Training

Building Information Management

JUNE 25, 2012

Fede ral Buildings Personnel Training Act. In accordance with the Federal Buildings Personnel Training Act 2010 (FBPTA), the below curriculum is recommended relating to facility. performance buildings. . Achieving this level of performance requires a government-?wide Curriculum -?

Integrated Project Delivery (IPD)

Integrated Project Delivery (IPD) Facility Management Project Management Consulting Building Performance Measurement

BIM Glossary Terms and Definitions – NBIMS-US – 2013

Building Information Management

SEPTEMBER 18, 2013

Building Information Modeling Model Management. BIM is a term which represents three separate but linked functions: Building Information Modeling: Is a BUSINESS PROCESS for generating and leveraging building data to design, construct and operate the building during its lifecycle. Attribute. Weight=7300, etc.

Building Information Modeling (BIM)

Building Information Modeling (BIM) Integrated Project Delivery (IPD) Building Materials Manufacturing Building Products Distribution

40+ Fresh Releases for Autodesk Construction Cloud

Autodesk Construction Cloud

SEPTEMBER 20, 2022

Autodesk Build . ReCap mesh files can now be saved as NWC models in Autodesk Construction Cloud for model coordination, issue resolution, recording precise measurements, providing comprehensive closeout documents, and more. . Autodesk Build ? . Gain greater precision and visibility in asset tracking and commissioning.

Building Information Modeling (BIM)

Building Information Modeling (BIM) Schedule Management Building Performance Measurement Change Management

Buyer’s Guide to Evaluating and Selecting Construction Project Management Software

In Eight

AUGUST 4, 2023

This real-time field data flow allows project managers to track progress against plans and then connect that data with the front office to manage performance and risks. By connecting these systems, everyone involved in the project has the performance visibility needed to take real-time corrective actions and keep projects on track.

Project Management

Project Management Construction Management Change Management Project Management Consulting

Environmental Regulations in Construction: What Contractors Need to Know

Levelset

OCTOBER 31, 2022

Governments balance the needs of both by requiring contractors, property owners, and others involved in construction to mitigate the effect of building activity on the environment, including air, water, and animal and plant life. In general, these laws apply to both contractors on the jobsite and the owner of the completed building.

Environmental Impact Assessment

Environmental Impact Assessment Building Permits Land Use Regulations Material Storage

A Primer on MasterFormat & Improving Construction Project Collaboration

Building Information Management

JULY 27, 2016

Standardized cost databases have been introduced based upon MasterFormat that enable construction owners, service providers, building product manufactures, and technology providers to improve cost visibility and also expand upon using historical and/or custom cost data. Measured Drawing Information. design/negotiate/build).

Fire Protection System Installation

Fire Protection System Installation Fire Protection Systems Collaboration Heavy Equipment Manufacturing

A Primer on MasterFormat & Improving Construction Project Collaboration

Building Information Management

JULY 27, 2016

Standardized cost databases have been introduced based upon MasterFormat that enable construction owners, service providers, building product manufactures, and technology providers to improve cost visibility and also expand upon using historical and/or custom cost data. Measured Drawing Information. design/negotiate/build).

Fire Protection System Installation

Fire Protection System Installation Fire Protection Systems Collaboration Heavy Equipment Manufacturing

Facilities Maintenance Checklist and Procedures

Job Order Contracting

SEPTEMBER 12, 2018

Preventive maintenance services should be performed by a qualified manufacturer’s service representative. Notify affected personnel before performing PM (alarmed or security entrances). Observe performance of various components, such as brake, limit switches, door operating speed, motor, gear box, etc. Standard tools – basic 2.

Maintenance

Maintenance Fire Protection System Installation Fire Protection Systems Electrical Wiring Installation

The Ultimate Guide to Air Quality Monitoring: Protecting Health & Environment

UK Construction Blog

MARCH 14, 2025

Key Takeaways Air quality monitoring is the continuous measurement of pollutants that provides crucial data for detecting harmful contaminants, with systems tracking parameters including humidity, temperature, CO2, VOCs and formaldehyde across diverse environments. Every breath you take matters.

Environmental Impact Assessment

Environmental Impact Assessment Quality Assurance Quality Control Building Performance Measurement

Public Law 111-308 – Federal Buildings Personnel Training Act – FBPTA – CORE COMPETENCIES

Building Information Management

JUNE 22, 2012

The core competencies identified include competencies relating to building operations and maintenance, energy management, sustainability, water efficiency, safety (including electrical safety) and building performance measures. Fede ral Buildings Personnel Training Act.

Building Performance Measurement

Building Performance Measurement Fire Protection System Installation Renewable Energy Systems Fire Protection Systems

The three Ps of prefabricated EIFS: Preparation, production, placement

Construction Specifier

DECEMBER 23, 2024

on the exterior of the building, which increases the effective thermal resistance of the assembly. While fully adhered systems offer certain advantages, their water management performance depends entirely on the quality of the installation, specifically, the quality of the drainage plane, which is rarely verified.

Prefabrication

Prefabrication Fire Protection System Installation Wall Systems Building Materials Manufacturing

Construction Project Zone

Fenestration and glazing: Seismic performance specification considerations

Why Pay Attention to HVAC Faults? System Performance Depends on It

Trending Sources

Code Compliance & Beyond: Upping Baseline Building Energy Performance

Everybody needs good NABERS – accommodating the new rating scheme in construction contracts

95 Marginal Street: A Comprehensive Overview of Its Historical Significance

Zweig Group’s 2024 Rising Stars In the AEC Industry

30 New Autodesk Build Releases You Should Know

Public Law 111-308 – Federal Buildings Personnel Training Act – FBPTA – Recommend Training

Public Law 111-308 – Federal Buildings Personnel Training Act – FBPTA – Recommend Training

BIM Glossary Terms and Definitions – NBIMS-US – 2013

40+ Fresh Releases for Autodesk Construction Cloud

Buyer’s Guide to Evaluating and Selecting Construction Project Management Software

Environmental Regulations in Construction: What Contractors Need to Know

A Primer on MasterFormat & Improving Construction Project Collaboration

A Primer on MasterFormat & Improving Construction Project Collaboration

Facilities Maintenance Checklist and Procedures

The Ultimate Guide to Air Quality Monitoring: Protecting Health & Environment

Public Law 111-308 – Federal Buildings Personnel Training Act – FBPTA – CORE COMPETENCIES

The three Ps of prefabricated EIFS: Preparation, production, placement

Stay Connected