GCP Applied Technologies

MAY 28, 2018

Waterproof concrete: Is it enough for protecting foundations? Although waterproofing systems account for a small fraction of the cost of an overall building project, if the wrong solution is chosen or it’s installed improperly, the costs of remediation can be tremendous. . Creating waterproof concrete. All concrete cracks.

Waterproofing Systems 104

Waterproofing Systems Concrete Pouring Structural Systems Wall Systems 104

Construction Specifier

SEPTEMBER 4, 2024

By Chris Bennett, iSCS, CDT, James Longo, iSCS, and Keith Robinson, RSW, FCSC, FCSI, LEED AP RSW, FCSC, FCSI Photo by Magda Biernat Photography Concrete floors are used in wide-ranging facilities, such as industrial data centers, commercial high-rise buildings, and residential homes.

Building Performance Measurement 82

Building Performance Measurement Curing Concrete Pouring Flooring Systems 82

Construction Specifier

JUNE 3, 2024

To illustrate the importance of moisture and pH testing in successful installations and demonstrate why building professionals should require installers to be certified, here is a look at what can happen when these factors are left out of the equation. Some installation issues relate to buckling, crowning, and cupping.

Flooring Systems 108

Flooring Systems Building Materials Manufacturing Concrete Pouring Controls Manufacturing 108

GCP Applied Technologies

MARCH 3, 2020

Ready mix concrete life cycle. Concrete producers can leverage advanced concrete admixtures , predictive analytics tools, and more to improve efficiency, from materials management to batching to concrete delivery. Concrete mix design. Concrete admixtures help to enable the use of these alternate pozzolans … more.

Concrete Pouring 78

Concrete Pouring Wall Systems Quality Control Fire Protection System Installation 78

GCP Applied Technologies

FEBRUARY 19, 2018

ASTM F710: Preparing the Concrete Floor. Why prepare the concrete slab? But just as important as these—and often overlooked—is careful preparation of the concrete slab. But just as important as these—and often overlooked—is careful preparation of the concrete slab. What constitutes a good concrete slab prep?

Concrete Pouring 97

Concrete Pouring Building Materials Manufacturing Flooring Systems Building Performance Measurement 97

GCP Applied Technologies

JUNE 7, 2018

Water is under pressure below ground and forces its way through even the smallest cracks in the concrete. Water infiltration can cause problems by corroding the structure and damaging materials housed within the building. Concrete is also susceptible to damage in coastal areas. Waterproof concrete. Soil contamination.

Waterproofing Systems 103

Waterproofing Systems Concrete Pouring Structural Systems Foundation Systems 103

GCP Applied Technologies

FEBRUARY 12, 2018

Cold Weather Concreting Practices. Building in the wintertime can involve special considerations, particularly when it comes to pouring concrete in cold weather. It’s imperative that the concrete is protected from freezing until it has attained a compressive strength of at least 500 psi (3.5 Cover the concrete.

Concrete Pouring 60

Concrete Pouring Curing Piping Installation Building Controls 60

GCP Applied Technologies

NOVEMBER 2, 2020

Controlling concrete setting times. Find tips on methods and concrete admixtures that can help contractors control concrete setting times. Concrete chemistry is complicated, and the makeup of the mix can impact its behavior – from its workability to the set times. Phillip.fry@gc…. Mon, 11/02/2020 - 11:14.

Concrete Pouring 78

Concrete Pouring Building Controls Building Materials Curing 78

CivilJungle

JANUARY 29, 2022

What Is Cast-In-Situ Concrete? Cast-in-situ concrete is prepared, placed, and finished on the construction site. Another name of cast-in-situ concrete is poured-in-place concrete. Generally, concrete slabs, concrete foundations , beam, column, wall, roof, etc., Definition of Cast in Place Concrete.

Concrete Pouring 52

Concrete Pouring Foundation Systems Wall Systems Curing 52

CivilJungle

DECEMBER 24, 2020

The concrete slab is a horizontal surface of a residential building or commercial building, factories, flat, etc. Sometimes in a domestic or commercial building, a thick concrete slab is constructed directly to the subsoil. Pour, Compact and Concrete Finish. Pour, Compact and Concrete Finish.

Prefabrication 52

Prefabrication Concrete Pouring Steel Fabrication Building Design 52

UK Construction Blog

OCTOBER 18, 2023

The post Reinforced Concrete: Strength and Durability for Modern Construction appeared first on UK Construction Blog. Reinforced concrete is a widely used construction material that combines the strengths of two components: concrete and steel reinforcement. In 1854, William B.

Concrete Pouring 64

Concrete Pouring Building Materials Manufacturing Building Materials Building Products Distribution 64

CivilJungle

MARCH 13, 2021

Mass Concrete: Large bridge piers , foundations , and such as dams like the massive structure , the mass concreting technique is used. For also, mass concrete strength , economy, uniformity, and other factors considered should take into account. The temperature shrinkage is the major problem in mass concrete work.

Concrete Pouring 52

Concrete Pouring Curing Foundation Systems Structural Systems 52

Construction Specifier

DECEMBER 18, 2024

Photos courtesy Heidelberg Materials In the built environment, concrete is a critical construction material for futureproofing against the effects of climate change. Its strength, durability, and resiliency are integral to sustainable building practices and support a growing emphasis on climate resilience.

Concrete Pouring 52

Concrete Pouring Environmental Impact Assessment Building Performance Measurement Building Materials Manufacturing 52

GCP Applied Technologies

FEBRUARY 19, 2018

ASTM F710: Preparing the Concrete Floor. Why prepare the concrete slab? But just as important as these—and often overlooked—is careful preparation of the concrete slab. But just as important as these—and often overlooked—is careful preparation of the concrete slab. What constitutes a good concrete slab prep?

Concrete Pouring 60

Concrete Pouring Building Materials Manufacturing Flooring Systems Building Performance Measurement 60

Civil + Structural Engineer

DECEMBER 1, 2023

The project leveraged four alternative delivery methods including: landside and airside construction management at-risk, a design-build-operate-maintain baggage team, design-bid-build award contracts and multiple design-build concession/tenant packages.

Engineering 130

Engineering Fire Protection System Installation Fire Protection Systems Environmental Consulting 130

The Korte Company

OCTOBER 3, 2018

Tilt-Up construction combines the strength and durability of reinforced concrete with the precision and efficiency of the Design-Build methodology. This one-two punch delivers new buildings quickly and economically, which might explain why more than 650 million square feet of Tilt-Up buildings go up every year.

Concrete Pouring 61

Concrete Pouring Building Products Distribution Energy Efficiency Building Materials 61

UK Construction Blog

JANUARY 20, 2025

The post Precast Concrete Detailing: Key Considerations for Fabricators and Contractors appeared first on UK Construction Blog. Precast concrete detailing is like the unsung hero in construction. When done well, it boosts the quality and life span of the building. But it’s not all smooth sailing.

Building Information Modeling (BIM) 52

Building Information Modeling (BIM) Steel Fabrication Concrete Pouring Quality Control 52

CivilJungle

FEBRUARY 12, 2021

Concrete Release Agent: Releasing agents are coatings added to the surface of the formwork prior to concreting , in order to allow quick removal of formwork or shuttering. If the appearance of the concrete surface is relevant, it is important to take care of the finishing surface of the shutter. Spray may be added.

Concrete Pouring 52

Concrete Pouring Painting/finishing Wall Systems Building Materials Manufacturing 52

CCR Magazine

DECEMBER 10, 2024

Epoxy floor coatings present a robust solution, offering strength up to three times greater than standard concrete. The coating’s exceptional bond to concrete substrates ensures it remains intact for years, even in challenging environments. The mixture is poured and spread evenly with rollers or squeegees.

Flooring Systems 52

Flooring Systems Heavy Equipment Manufacturing Concrete Pouring Curing 52

CivilJungle

FEBRUARY 5, 2022

CMU is a modern building unit that has various benefits as compared to bricks. The CMU blocks are available in various shapes and sizes in the market and are widely used in the construction of walls of the building. In this article, we will discuss all about the concrete masonry units. Concrete Masonry Unit (CMU) Specifications.

Masonry 52

Masonry Concrete Pouring Wall Systems Building Materials Manufacturing 52

CivilJungle

FEBRUARY 16, 2021

Its use of concrete blocks for masonry construction has indeed been quickly established which are higher than conventional construction materials such as bricks and stones. Concrete blocks with a trading name such as siporex are available on the light-colored market. Hollow Concrete Block Size: 0.40 m : hollow tiles.

Building Materials Manufacturing 52

Building Materials Manufacturing Concrete Pouring Wall Systems Curing 52

Levelset

OCTOBER 18, 2022

As a result, contractors and property owners are increasingly considering alternatives to traditional building materials. We’ll take a look at some of these lesser-known building materials, how they’re used, and their pros and cons below. Concrete alternatives.

Building Materials 52

Building Materials Concrete Pouring Building Materials Manufacturing Curing 52

CivilJungle

APRIL 26, 2020

What Is Concrete? Concrete is the final product resulting from mixing cement , aggregates (including sand), water, and mixtures. The first use of concrete was by the Roman Empire. The Pantheon is the largest unreinforced concrete dome in the world, built-in 120 A.D. Different Types of Concrete. Dry lean Concrete.

Concrete Pouring 64

Concrete Pouring Steel Fabrication Building Materials Manufacturing Structural Systems 64

UK Construction Blog

JUNE 6, 2023

Ever wondered how concrete structures maintain their shape and strength during construction? Short Summary Shuttering is a critical component of concrete construction, with various materials and techniques providing structural support during the hardening process.

Steel Fabrication 52

Steel Fabrication Structural Systems Wall Systems Concrete Pouring 52

Construction Specifier

JUNE 30, 2021

Waterproofing protects the integrity of a structure and its occupants by forming a barrier to prevent water from entering the building envelope. Blindside waterproofing is more complex than traditional below-grade waterproofing because the process is ‘reversed,’ and waterproofing is installed before the concrete/shotcrete is installed.

Concrete Pouring 52

Concrete Pouring Material Handling Building Materials Curing 52

Natural Building

JUNE 14, 2006

We have been experiencing a renaissance in the use of natural materials for building throughout the U. He and Paul Koppana have cooperated on several building projects, but there are many other fine craftsmen and women doing admirable work. With adobe the curing and finishing process can go on for weeks, or even months.

Concrete Pouring 40

Concrete Pouring Painting/finishing Curing Building Materials 40

CivilJungle

JANUARY 4, 2022

Information of Cold Joint Concrete. Concreting is a critical process which required a strict supervision during placing and compaction of the concrete so as to achieve the desired strength. Cold joint in the concrete is a defect which occurs in the concrete due to improper or delayed placing of the concrete layers.

Concrete Pouring 52

Concrete Pouring Building Performance Measurement Building Materials Building Design 52

CivilJungle

MARCH 14, 2021

This wider bottom disseminates the burden over a good area , adding stability to the building. The spread footings are constructed with concrete & steel and, because of their design, they’re less likely to fail than other spot footers. Spread Foundation: The Spread foundations are common to use within the building industry.

Foundation Systems 52

Foundation Systems Concrete Pouring Wall Systems Structural Systems 52

CivilJungle

JANUARY 29, 2022

From the foundation of the building to finishing work of building , cement is used. The cost of cement a very important role in the construction cost of a building. Cement has been used in many works such as concrete in foundation , mortar in brick masonry , mortar in plaster , bedding in flooring. Bhavya PPC Cement.

Concrete Pouring 52

Concrete Pouring Curing Masonry Cost Control 52

CivilJungle

JUNE 26, 2021

Curb and Gutter are the structures that are made from concrete or asphalt which is used to collect the surface runoff water from parking lots or impervious surfaces. Barrier curbs and gutter are generally made up of cement concrete and asphalt aggregates. The concrete mix should be laid and compacted properly.

Concrete Pouring 52

Concrete Pouring Wall Systems Structural Systems Lean Construction 52

CivilJungle

NOVEMBER 19, 2020

In building construction, the first stage is earth excavation , which is then followed by dewatering the trenches, laying of brick flat sloping and PCC layer, placing of reinforcement caging for the construction of footings, and finally the Concreting of foundations. Adhesive resins such as bitumen, tar, natural gum, wax etc.

Building Materials Manufacturing 52

Building Materials Manufacturing Waterproofing Systems Concrete Pouring Building Materials 52

CivilJungle

MAY 1, 2021

That is used in concrete mixtures , fly ash increases the strength and isolation of the concrete and makes pumping smoother. Also, Read: 10 Difference Between Mortar and Concrete | What Is Mortar & Concrete | Types of Mortar & Concrete. Fly Ash in Concrete. Benefits of Fly Ash Concrete.

Concrete Pouring 52

Concrete Pouring Building Materials Manufacturing Building Materials Cost Control 52

Natural Building

OCTOBER 25, 2007

Green Home Building and Sustainable Architecture. Sustainable architecture is an exciting and important field, with many people reviving traditional methods of building and others creating innovations to established practices. Kelly Hart has been involved with green building concepts for much of his life. Stone Houses.

Green Building 40

Green Building Sustainability Architecture Building Materials Manufacturing 40