Construction Specifier

SEPTEMBER 10, 2024

Florida-based Plastic Components is the originator and designer of many innovative trims, and manufactures quality plastic trims and accessories that offer the non-rusting alternative to metal. Our PVC Soffit vents deliver the low cost, permanent and rust-free solution to venting soffits. The post Need vents? We’ve got them!

Roofing Systems 59

Roofing Systems Building Materials Manufacturing Material Handling Controls Manufacturing 59

Plant & Civil Engineer

SEPTEMBER 16, 2024

Liebherr’s launch of its own digital platformto sell used equipment directly has opened the floodgates to a slew of major companies taking control of the disposal of their used equipment. However, it can sometimes be more costly, with varying results – with the seller often losing control over their inventory and brand.

Controls Manufacturing 52

Controls Manufacturing Construction Equipment Cost Control Building Controls 52

Building Radar

JULY 31, 2024

Modern construction projects are increasingly defined by the materials used, which impact everything from durability and energy efficiency to aesthetics and cost. This article explores a range of innovative building products transforming the construction industry today, highlighting their applications and benefits.

Renewable Energy Systems 52

Renewable Energy Systems Building Materials Manufacturing Building Performance Measurement Energy Efficiency 52

CCR Magazine

JUNE 10, 2024

Efficient HVAC design ensures precise temperature control, preventing overheating or freezing of equipment. Advanced temperature regulation involves the use of PID (Proportional-Integral-Derivative) controllers, which offer precise control by adjusting the HVAC system output to match the exact thermal load requirements.

HVAC Systems 52

HVAC Systems Energy Efficiency Quality Control Controls Manufacturing 52

Civil + Structural Engineer

APRIL 14, 2023

. – After a long, stormy winter, drivers are faced with dodging potholes or suffering the consequences of damage to their vehicles, but a first-of its-kind quality control tool may help increase the quality of pavement and keep those potholes, ruts and cracks from forming. In some cases, the entire road may have to be rebuilt.

Quality Control 130

Quality Control Quality Assurance Building Performance Measurement Controls Manufacturing 130

Civil + Structural Engineer

JULY 25, 2023

[San Antonio, Texas] – Tindall Corporation, one of the largest precast concrete manufacturers in North America, recently announced the completed expansion of its Texas facility. Tindall Corporation is one of the largest precast concrete manufacturers in North America.

Concrete Pouring 130

Concrete Pouring Structural Systems Modular Construction Controls Manufacturing 130

Civil + Structural Engineer

JUNE 10, 2024

Fabric building companies offer several services to help ensure successful facility projects. By Eric Donnay, Legacy Building Solutions Decades ago, acquiring a tension fabric structure didn’t require much of a process. In others, leading manufacturers have exponentially stepped up their games. What building height is needed?

Steel Fabrication 130

Steel Fabrication Controls Manufacturing Structural Systems Building Design 130

Building Radar

AUGUST 6, 2024

Automation is revolutionising various industries by improving efficiency, reducing costs, and enhancing productivity. Software : Encompasses applications and systems that control and monitor automated processes. Control Systems : Devices and software used to regulate the operation of machinery and systems.

Building Automation 52

Building Automation Building Information Modeling (BIM) Building Performance Measurement Construction Machinery 52

Wolgast Corporation

JUNE 14, 2023

Wall panel system construction is gaining popularity due to its labor and time savings to erect a building envelope. Precast concrete walls with conventional steel roof framing are one option to use on a large commercial building. There are economic choices/selections that can adjust the cost of your panels.

Concrete Pouring 91

Concrete Pouring Wall Systems Building Materials Manufacturing Structural Systems 91

BD+C

JANUARY 26, 2021

For the past half-dozen years or so, off-site manufacturers of components and modules have sprung up in response to growing demand for commercial prefabrication and modular construction.

Building Materials Manufacturing 105

Building Materials Manufacturing Modular Construction Controls Manufacturing Quality Control 105

Civil + Structural Engineer

SEPTEMBER 9, 2024

Digital twin technology is extremely useful in the built world as it helps solve various industry-specific challenges, including cost optimization, safety, thorough planning, predictive modeling, and more. From planning through construction to the operation of a building, there are enormous amounts of data created by multiple stakeholders.

Risk Management 130

Risk Management Cost Control Project Management Construction Management 130

Construction Specifier

DECEMBER 1, 2023

During the design phase, the process of selecting and specifying a curtain wall and/or storefront, in some cases is limited to aesthetics, structural considerations, thermal performance, and cost. An effective AWB controls both air leakage and vapor diffusion through the building envelope, helping prevent materials’ deterioration.

Wall Systems 59

Wall Systems Building Materials Manufacturing Controls Manufacturing Cost Control 59

Construction Specifier

JUNE 3, 2024

According to Independent Floor Testing & Inspection (IFTI), the leading cause of flooring failures is moisture, costing the industry $2.4 These new tools and products are often specific to the manufacturer, and each manufacturer has different instructions and application guidelines. billion each year in remediation.

Flooring Systems 108

Flooring Systems Building Materials Manufacturing Concrete Pouring Controls Manufacturing 108

UK Construction Blog

FEBRUARY 12, 2024

Hydraulic door opener and closer, assume a critical role in the domain of modern architecture and building design, due to their usefulness and comfort. These gadgets, controlled by hydraulic mechanisms, have revolutionized how we installed the doors, offering simple methods as well as improved energy effectiveness.

HVAC System Installation 62

HVAC System Installation Building Controls Cost Control Controls Manufacturing 62

Construction Specifier

DECEMBER 1, 2023

During the design phase, the process of selecting and specifying a curtain wall and/or storefront, in some cases is limited to aesthetics, structural considerations, thermal performance, and cost. An effective AWB controls both air leakage and vapor diffusion through the building envelope, helping prevent materials’ deterioration.

Wall Systems 52

Wall Systems Building Materials Manufacturing Controls Manufacturing Cost Control 52

Civil + Structural Engineer

MARCH 4, 2024

The new advanced manufacturing facility, comprising three separate buildings with associated ancillary structures, will create up to 4,000 jobs on site over the lifespan of the project and thousands more in the supply chain. We look forward to working with Stantec to design the UK’s largest battery cell manufacturing facility.

Building Materials Manufacturing 130

Building Materials Manufacturing Controls Manufacturing Facility Management Energy Efficiency 130

Civil + Structural Engineer

NOVEMBER 17, 2023

The firm has extensive industry expertise in bridge certification and assessment, project and construction management of tunnels, roads, and rail infrastructure, as well as building condition assessments, improvements, and certifications. The German construction market is the largest in Europe at EUR427 billion (CAD$629.9 billion) in 2022.

Engineering 264

Engineering Project Management Public Works Construction Management 264

Building Radar

JULY 16, 2024

Shop drawings are detailed drawings, diagrams, and schedules produced by contractors, fabricators, and manufacturers. Coordination and Collaboration : By detailing exact dimensions, materials, and installation methods, shop drawings facilitate coordination between various trades and ensure seamless integration of building systems.

Building Materials Manufacturing 52

Building Materials Manufacturing Risk Management Quality Control Building Controls 52

Civil + Structural Engineer

NOVEMBER 1, 2023

By Shannon Humbert, Legacy Building Solutions Rigid-frame fabric buildings offer a permanent solution for athletic facilities. For many entities, both public and private, the need for an athletics and recreation facility comes down to two options: A permanent brick and mortar building, or a lower-cost fabric bubble.

Steel Fabrication 130

Steel Fabrication HVAC System Installation Structural Systems Fire Protection System Installation 130

Building Radar

AUGUST 11, 2024

This dual role allows the CM to influence the design for cost-effectiveness and efficiency, ensuring that the project can be completed within the agreed budget and timeline. Key Benefits of CMAR Cost Control : With a GMP in place, the owner has a clear understanding of the project costs early in the process.

Risk Management 40

Risk Management Construction Management Cost Control Project Management 40

CCR Magazine

MARCH 25, 2024

Through Active Performance Management and Armstrong 360 Service and Support solutions, customers will get the best possible performance and value from fire safety systems at every phase in the lifecycle of a building” Baird concludes. In the shift toward digitalization and integration of fluid-flow systems, Armstrong leads the industry.

Fire Protection System Installation 52

Fire Protection System Installation Fire Protection Systems HVAC System Installation Safety Regulations 52

Construction Specifier

SEPTEMBER 15, 2023

Products and construction methodologies that provide immediate reductions in embodied carbon must be weighed against building longevity, lifecycle cost, energy consumption, and a host of other variables. Noise reduction 6 : Air leakage through the building envelope can allow the transmission of external noise into the interior spaces.

Sustainability 64

Sustainability HVAC Systems Building Products Distribution Energy Efficiency 64

CCR Magazine

APRIL 8, 2024

till 2035, as per the research done by Market Research 365 The increasing emphasis on energy efficiency within commercial buildings is leading to a heightened demand for advanced commercial boilers that utilize cutting-edge technologies like condensing boilers and modulating burners. Bn to over USD 29.3

Renewable Energy Systems 52

Renewable Energy Systems Energy Efficiency Controls Manufacturing Building Optimization 52

BDC Network

JUNE 8, 2024

8 ways to cool a factory 0 qpurcell Sat, 06/08/2024 - 10:00 Industrial Facilities Whichever way you look at it—from a workplace wellness point of view or from a competing for talent angle—there are good reasons to explore options for climate control in the factory workplace. The US manufacturing sector is booming.

Heavy Equipment Manufacturing 121

Heavy Equipment Manufacturing Fire Protection System Installation Building Materials Manufacturing HVAC System Installation 121

Job Order Contracting

DECEMBER 21, 2021

Most, if not all, public sector real property owners have extraordinarily little visibility into facilities preventive maintenance costs or granular associated task line times. For example, owners may require a preventive maintenance activity and an associate cost from a contractor. Test for leaks per manufacturer’s instructions.

Maintenance 95

Maintenance Building Materials Manufacturing HVAC System Installation Controls Manufacturing 95

The Pro Builder

OCTOBER 25, 2023

Thermal bridging can be a major source of energy loss in buildings. Thermal bridges are essentially areas in the building envelope that allow heat to pass through more easily and occur where materials that are better conductors of heat form a "bridge" between the inner and outer face of the construction. air changes per hour.

Energy Efficiency 130

Energy Efficiency Renewable Energy Systems HVAC System Installation Sustainability 130

Building Radar

AUGUST 29, 2024

In construction, understanding the difference between hard costs and soft costs is crucial for budgeting, project management, and overall financial planning. Both cost categories play a pivotal role in determining the total expenditure of a construction project, but they cover very different aspects of the process.

Insurance Management 52

Insurance Management Building Materials Manufacturing Building Permits Project Management 52

Autodesk Construction Cloud

JULY 31, 2023

This shift isn't just a passing trend; the prefabricated buildings market is expected to surpass $227.7 Design and BIM Prefabrication is all about building a structure's elements offsite and assembling them on location. While it's true that prefab enables you to build a structure in a more controlled environment (i.e.,

Prefabrication 98

Prefabrication Building Information Modeling (BIM) Modular Construction Building Materials Manufacturing 98

Building Radar

AUGUST 29, 2024

The push for green building certifications, energy-efficient designs, and sustainable materials is becoming more pronounced as cities strive to reduce their carbon footprint. Innovations such as Building Information Modeling (BIM), drones, and augmented reality are enhancing the precision and efficiency of construction projects.

Building Information Modeling (BIM) 52

Building Information Modeling (BIM) Prefabrication Modular Construction Building Materials Manufacturing 52

CCR Magazine

DECEMBER 3, 2023

Custom manufacturing produces commodities responding to particular requests that answer specific customer or business requirements and characteristics. In this instance, it is common practice for the manufacturer and the client to work closely together until the output satisfies all set standards.

Building Materials Manufacturing 52

Building Materials Manufacturing Controls Manufacturing Building Products Distribution Quality Control 52

Autodesk Construction Cloud

DECEMBER 5, 2022

That may have once been the case, but today’s modular builds offer flexibility in design and aesthetic elements to yield the quality and style that builders and clients seek. Add to flexibility and rapid delivery tremendous cost savings and it’s really no wonder modular construction is taking off. But wait…there’s more!

Modular Construction 105

Modular Construction Controls Manufacturing Building Controls Prefabrication 105

CCR Magazine

JULY 18, 2024

Project management plays an important role in cost control and profitability of construction companies since it influences the cash flow of the business. Regardless of how low such direct costs may be, they can make a significant difference when added up over numerous projects.

Project Management 52

Project Management Construction Management Schedule Management Cost Control 52

Construction Specifier

MARCH 4, 2022

Photos courtesy Legacy Building Solutions. Tension fabric structures have served a key role as a cost-effective facility solution for years. In some cases, users have turned to fabric buildings when brick-and-mortar construction is not economically feasible or would take too long to complete. By Ben Fox and Ellie Fox.

Steel Fabrication 52

Steel Fabrication Building Materials Manufacturing Quality Control Controls Manufacturing 52

CCR Magazine

JUNE 13, 2024

As businesses and stakeholders increasingly prioritize efficiency, cost-effectiveness, and environmental responsibility, the landscape of commercial construction continues to evolve. It also aids in precise cost estimation and resource allocation, leading to more efficient project management and better outcomes.

Building Information Modeling (BIM) 52

Building Information Modeling (BIM) Building Materials Manufacturing Energy Efficiency Building Automation 52

CCR Magazine

MAY 8, 2024

UV Protection and Sunlight Control: Hurricane impact windows are equipped with specialized coatings and treatments that provide protection against harmful ultraviolet (UV) radiation from the sun. Consider factors such as geographic location, local building codes, proximity to coastal areas, and past experiences with extreme weather events.

Environmental Impact Assessment 52

Environmental Impact Assessment Energy Efficiency Controls Manufacturing Building Materials Manufacturing 52

Construction Specifier

NOVEMBER 29, 2022

Air barriers create airtightness and help protect against energy loss, water infiltration, and other hazards impacting the durability and resiliency of a building and the comfort and health of its occupants. Unchecked air movement can impact energy loss and efficiency, translating to wasted money on climate control.

Fire Protection System Installation 52

Fire Protection System Installation Building Controls Building Materials Manufacturing Quality Control 52

CCR Magazine

SEPTEMBER 6, 2024

From inflatable domes to modular buildings, the options are virtually endless. There are several reasons why they’re becoming the go-to solution for growing sports programs: Cost-effective: Traditional sports facilities can be expensive to build and maintain.

Structural Systems 52

Structural Systems Facility Management Heavy Equipment Manufacturing Quality Control 52