Civil + Structural Engineer

AUGUST 19, 2024

By: Rich MacGregor, Technical Writer The growing trend towards above ground pump stations is transforming wastewater collection systems, empowering operators to rise above the challenges of conventional submersible pumps. Conventional submersible lift station designs present significant safety hazards, complicating maintenance procedures.

Piping Installation 130

Piping Installation Lifts Electrical Wiring Installation Electrical Systems 130

Construction Specifier

MARCH 5, 2022

Structural silicone glazed (SSG) façade systems are an industry mainstay. In addition, SSG façade systems typically have a service life of 20 to 40 years and are usually dependent on the service life of the glazing materials. By Christopher J. Brandmeier, PE, Bradford S. Carpenter, PE, and Sierra L.

Quality Assurance 52

Quality Assurance Structural Systems Renewable Energy Systems Quality Control 52

Construction Specifier

DECEMBER 1, 2023

By Kevin Haynes Designing the transition between an effective air barrier and fenestration, such as curtain wall and storefront, can present challenges for the designer and specifier. An effective AWB controls both air leakage and vapor diffusion through the building envelope, helping prevent materials’ deterioration.

Wall Systems 59

Wall Systems Building Materials Manufacturing Controls Manufacturing Cost Control 59

CCR Magazine

AUGUST 20, 2024

Environmental Challenges: Building in Hostile Conditions One of the most significant challenges in construction is dealing with extreme environmental conditions , such as those found in arctic regions, deserts, or deep oceans. In desert environments, the challenge often lies in managing extreme heat and lack of water.

Engineering 52

Engineering Structural Systems Modular Construction Building Materials 52

BD+C

MARCH 20, 2023

3 ways prefabrication doubles as a sustainability strategy 0 qpurcell Mon, 03/20/2023 - 11:09 Modular Building Corie Baker, AIA, shares three modular Gresham Smith projects that found sustainability benefits from the use of prefabrication. for the cases considered. for the cases considered.

Prefabrication 128

Prefabrication Sustainability Modular Construction Renewable Energy Systems 128

Civil + Structural Engineer

MAY 1, 2024

Many Architects are embracing the WELL Building Standard (WELL) to address issues of human health and wellness. The importance of incorporating lifestyle into design does not stop at the walls of a building. In the built environment, stormwater quality is reduced by pollutants from manmade surfaces and structures.

Sustainability 264

Sustainability Electrical Systems Green Building Site Planning 264

CCR Magazine

JULY 11, 2024

The Thermafit Model MAS helps give contractors and engineers the option to eliminate or reduce the need for traditional, fossil fuel boilers and owners new solutions to decarbonize buildings through the electrification of heating. It responds to varying building loads throughout the day and year, resulting in performance that is 8.2

HVAC System Installation 52

HVAC System Installation Piping Installation HVAC Systems Building Controls 52

Construction Specifier

SEPTEMBER 11, 2024

The scientists needed to be able to control the sunlight entering the lab, replicating real ocean conditions for algae growth in controlled settings. This demanded precise sunlight control—a challenging task to undertake. Once the daylight reaches the interior, it is evenly distributed throughout the space using diffusers.

Roofing Systems 52

Roofing Systems Historic Preservation Building Products Distribution Building Controls 52

BDC Network

MARCH 18, 2024

Maria Ionescu Healthcare Facilities Modular Building Contractors Designers Architects Coronavirus Roughly a quarter of the U.S. Emergency departments (ED) remain the overwhelmed gatekeepers—the first point of entry into the healthcare system for people in crisis. Clinicians called the newly built structure “a godsend.”

Modular Construction 105

Modular Construction Structural Systems Prefabrication Building Design 105

Construction Specifier

DECEMBER 1, 2023

By Kevin Haynes Designing the transition between an effective air barrier and fenestration, such as curtain wall and storefront, can present challenges for the designer and specifier. An effective AWB controls both air leakage and vapor diffusion through the building envelope, helping prevent materials’ deterioration.

Wall Systems 52

Wall Systems Building Materials Manufacturing Controls Manufacturing Cost Control 52

CCR Magazine

FEBRUARY 20, 2024

Well-designed metal ductwork is crucial for managing airflow and maintaining good indoor air quality in modern buildings. However, the intricate planning and execution of duct systems requires in-depth mechanical engineering knowledge and adherence to strict HVAC codes and standards. What Does a Proper Metal Duct System Look Like?

HVAC System Installation 52

HVAC System Installation HVAC Systems Steel Fabrication Energy Efficiency 52

The Pro Builder

APRIL 22, 2023

Off-site or industrialized construction methods potentially offer multiple advantages beyond a quieter jobsite and provide a path to build single-family homes much faster with a good framing crew. The bulk of the cost savings from Agorus’ method come from fewer days to build and the cost of labor required.

Building Information Modeling (BIM) 246

Building Information Modeling (BIM) Modular Construction Building Materials Manufacturing Flooring Systems 246

Autodesk Construction Cloud

SEPTEMBER 22, 2023

CS600476 | Tracking Field Production with Assemble System and Power BI In this class, we’ll show you how your team can use Autodesk Assemble to track project installations accurately and efficiently, enabling greater productivity and transparency. Using the Assemble Systems iPad app, we can track site installation of critical path work.

Building Information Modeling (BIM) 102

Building Information Modeling (BIM) Schedule Management Quality Control Building Standards 102

Civil + Structural Engineer

DECEMBER 1, 2023

The season of celebration and joyous reunion will soon be upon us, and Civil+Structural Engineer Magazine is proud to kickstart the season of celebration by announcing our 2023 Yearbook of Engineering Achievement. Terminal C’s design successfully navigated an aggressive four-year construction schedule without disrupting airport operations.

Engineering 130

Engineering Fire Protection System Installation Fire Protection Systems Environmental Consulting 130

Construction Specifier

JULY 7, 2023

New England and Greek Revival influences One notable architectural feature in New England is the use of brick-ended structures, which serve as a prominent design element for both public and residential buildings.

Architecture 96

Architecture Fire Protection Systems Project Management Consulting Roofing Systems 96

BD+C

MARCH 31, 2023

Voice of the Brand When hurricanes, tornados, extreme temperatures, snow and ice, or salty ocean air have the potential to impact a structure, it is critical to design a building envelope system that will protect the occupants from the elements and deliver a comfortable environment.

Zoning 105

Zoning Fire Protection System Installation Fire Protection Systems Building Performance Measurement 105

CCR Magazine

OCTOBER 28, 2024

The Queens Borough Hall Municipal Garage and Community Space won the Design-Build Institute of America’s 2024 National Award of Merit. The garage is New York City’s first ever municipal project contracted as a design-build construction undertaking, under the recently authorized NYC design-build legislation.

Building Design 52

Building Design Fire Protection System Installation Roofing Systems Structural Systems 52

Construction Specifier

JUNE 5, 2024

By Karine Galla Air and water-resistive barrier systems play a crucial role in the longevity and performance of commercial buildings, and safeguarding against issues such as excessive energy consumption and moisture-related damage. They promote drying because they allow vapor from inside the building to diffuse to the outside.

Building Code Compliance 59

Building Code Compliance HVAC System Installation Renewable Energy Systems Building Materials Manufacturing 59

CCR Magazine

OCTOBER 7, 2024

Keeping in view the psychological effects of climate change the construction industry has to find ways of how it can build structures that can effectively withstand the changing climate conditions. Houses and other structures that are built with the past climatic conditions can in fact not cope with the current severe conditions.

Building Resilience 52

Building Resilience Renewable Energy Systems Energy Efficiency Building Performance Measurement 52

BDC Network

MAY 29, 2024

APA – THE ENGINEERED WOOD ASSOCIATION MFPRO+ Blog APA’s Compelling Conversations features building professionals discussing important issues with APA experts and what they mean for the building industry. We believe that product compliance and build schedules have all become increasingly demanding. Ron: What about quality?

Wall Systems 105

Wall Systems Building Code Compliance Site Planning Quality Control 105

Civil + Structural Engineer

JUNE 10, 2024

At the turn of the century, the company pioneered the use of steel-reinforced concrete to create safer, stronger, and more efficient buildings. A Geometric and Logistical Challenge The unique build presented several challenges.

Concrete Pouring 100

Concrete Pouring Project Management Consulting Surveying Site Planning 100

UK Construction Blog

MAY 14, 2024

The type of substance builders might encounter depends on the material used for construction or the product with which a structure was built. Asbestos Dust : Although its use is heavily regulated or banned in many countries, asbestos can still be found in older buildings. The control limit for all types of asbestos is 0.1

Health Regulations 62

Health Regulations Safety Regulations Quality Control Building Controls 62

Construction Specifier

DECEMBER 29, 2021

In the 20 th century, wall assemblies discretized into multi-layered systems with each playing a distinct role. Each new layer arose with the emergence of building science technology, including rain screen design principles and the evolution of building materials. FPIS system utilizing foil-faced polyisocyanurate insulation.

Wall Systems 98

Wall Systems Building Materials Manufacturing Fire Protection Systems Building Codes 98

UK Construction Blog

MAY 8, 2024

The post Understanding Septic Tanks and How They Work and Regulatory Considerations for New Builds appeared first on UK Construction Blog. Septic tanks play a crucial role in managing wastewater for properties not connected to a centralised sewage system. The liquid wastewater, known as effluent, occupies the middle layer.

Piping Installation 62

Piping Installation Health Regulations Building Permits Safety Regulations 62

CCR Magazine

APRIL 26, 2024

Renovating a basement bathroom involves a series of well-defined steps that ensure both functionality and compliance with local building codes. Initially, homeowners must assess the feasibility of the project, focusing on the existing layout, plumbing, and structural requirements.

Waterproofing Systems 52

Waterproofing Systems Building Code Compliance HVAC System Installation Ceiling Systems 52

Roads Online

NOVEMBER 12, 2023

The aim was to design a batch plant that was more cost effective to ship and install – yet maintained Astec’s world renowned design features and structural build quality. Smale says combining in-house expertise with direct feedback from the Australian market helped to develop a solution that specifically met the needs of customers here.

Infrastructure Development 105

Infrastructure Development Quality Control Building Design Structural Systems 105

Construction Specifier

SEPTEMBER 30, 2024

No major substrate renovations are required when installing an extensive green roof, although additional structural support may be required. This is because they can add significant weight—ranging from 68 to 272 kg (150 to 600 lb) per square foot—due to the soil, vegetation, and water retention systems.

Sustainability 52

Sustainability Roofing Systems Green Building Structural Systems 52

Job Order Contracting

AUGUST 20, 2023

To meet their responsibilities as stakeholders of the built environment ( facilities and other built structures ), public sector owners need to have the ability create credible construction cost estimate for ALL repair, renovation, maintenance (FSRM), and new build projects.

Estimating 89

Estimating Structural Systems Schedule Management Risk Management 89

Construction Specifier

SEPTEMBER 5, 2024

Even when people are inside, it is hard to block out intruding and distracting noises within the space people are in; noise coming from adjacent rooms, areas above or below, or from hallways; or even from outside the building. The purpose of the building determines what types of noise pollution creates “pain points” for occupants.

Building Performance Measurement 64

Building Performance Measurement Ceiling Systems Project Management Consulting Flooring Systems 64

CCR Magazine

SEPTEMBER 13, 2024

As the Middle Tennessee’s first full-service hotel built in nearly a decade, the eight-story, 244-room Hilton Franklin Cool Springs offers one of the only roof-level patios in town plus a stylish lobby and contemporary guest rooms with Tubelite thermal entrance systems and floor-to-ceiling window wall. U-Factors for thermal performance.

Painting/finishing 52

Painting/finishing Wall Systems Roofing Systems Flooring Systems 52

Building Radar

AUGUST 6, 2024

Building Information Modeling (BIM) Building Information Modeling (BIM) has become a cornerstone in modern construction practices. BIM allows for the creation of detailed 3D models that represent both the physical and functional characteristics of a building. Key Innovations in Construction Technology 1.

Building Information Modeling (BIM) 52

Building Information Modeling (BIM) Energy Efficiency Building Automation Building Materials Manufacturing 52

CCR Magazine

JANUARY 23, 2024

The structures that surround us today are no exception to that law of physics. Some building materials are more durable than others, like stone and steel, but unfortunately the days of structures surviving thousands of years, like the Egyptian pyramids and Roman cathedrals, are over. All matter breaks down over time.

Maintenance 52

Maintenance Building Performance Measurement Inspection Roofing Systems 52

Civil + Structural Engineer

JUNE 10, 2024

With her educational background and personal focus on structural engineering, she accepted a position with RJN Group Inc., a civil engineering firm focused on sanitary sewer systems, as a stop-gap measure until she could find a career more suited to her structural engineering ambition.

Project Management Consulting 147

Project Management Consulting Public Works Environmental Impact Assessment Project Management 147

CCR Magazine

APRIL 8, 2024

till 2035, as per the research done by Market Research 365 The increasing emphasis on energy efficiency within commercial buildings is leading to a heightened demand for advanced commercial boilers that utilize cutting-edge technologies like condensing boilers and modulating burners. These systems are becoming more intelligent and connected.

Renewable Energy Systems 52

Renewable Energy Systems Energy Efficiency Controls Manufacturing Building Optimization 52

Autodesk Construction Cloud

JANUARY 18, 2024

Our latest white paper, ‘Building Net Zero and The Role of Data in Green Construction’ , investigates the current landscape for sustainability in construction across APAC – as well as potential solutions. The manufacturing, construction and building sectors account for 17% and 4% of GHG emissions in the region respectively.

Environmental Impact Assessment 84

Environmental Impact Assessment Building Materials Manufacturing Green Building Renewable Energy Systems 84

Construction Specifier

SEPTEMBER 18, 2024

By passively moderating indoor temperature fluctuations, thermal mass helps make building structures more resilient to heat waves and power outages. These thermally massive materials function as buffers, smoothing out the daily temperature cycles inside buildings by absorbing heat during the day and releasing it in the evening.

Ceiling Systems 52

Ceiling Systems HVAC System Installation Renewable Energy Systems HVAC Systems 52

Construction Marketing

MARCH 28, 2022

As a commercial building proprietor, it’s recommended that you adopt energy-efficient solutions for your establishment. You can do your part by designing an energy-efficient building. This movement is said to be currently being applied to many premises that are present in a large span of industries. Install Building Insulation.

Energy Efficiency 91

Energy Efficiency HVAC System Installation Electrical Systems HVAC Systems 91