Construction Specifier

JANUARY 26, 2025

Photo courtesy Intertek As building codes and standards evolve, the demand for airtight, environmentally friendly building enclosures increases among building owners, insurers, and design professionals. Air barriers are essential for maintaining the integrity and performance of building enclosures.

Building Code Compliance 64

Building Code Compliance Building Performance Measurement HVAC System Installation Fire Protection System Installation 64

The Pro Builder

FEBRUARY 15, 2024

Ways to Improve Home Building Productivity, Part 2: Automation ibush Thu, 02/15/2024 - 15:31 Home builders can maximize efficiencies gained through simplification and standardization by automating both on-site and back-office operations Tony L. Consider the potential benefits of off-site construction to your current home building process.

Building Automation 204

Building Automation Building Materials Manufacturing Site Planning Controls Manufacturing 204

UK Construction Blog

MARCH 26, 2025

The post Top 10 Construction Defects: Prevent These Costly Building Mistakes appeared first on UK Construction Blog. Key Takeaways Construction defects commonly stem from design deficiencies, poor workmanship, substandard materials and inadequate quality control, potentially reducing property values by up to 25%.

Electrical Wiring Installation 52

Electrical Wiring Installation HVAC System Installation Fire Protection System Installation Plumbing Systems 52

Civil + Structural Engineer

MAY 1, 2024

Many Architects are embracing the WELL Building Standard (WELL) to address issues of human health and wellness. The importance of incorporating lifestyle into design does not stop at the walls of a building. In the built environment, stormwater quality is reduced by pollutants from manmade surfaces and structures.

Sustainability 264

Sustainability Green Building Electrical Systems Site Planning 264

The Pro Builder

JANUARY 2, 2024

Their collaboration enables homeowners or builders to select from Hereabout’s list of preexisting, ready-to-use design plans, then build the home using B.PUBLIC’s prefab floor, roof, and wall panels. Manufacturing the panels in climate-controlled factories also results in 95% less waste and 30% faster home construction, per B.PUBLIC.

Building Performance Measurement 264

Building Performance Measurement Building Materials Manufacturing Modular Construction Building Codes 264

UK Construction Blog

JULY 22, 2024

The post Enhancing Buildings with Modern Curtain Walling Systems appeared first on UK Construction Blog. Curtain walling is a type of cladding used in construction to protect buildings from weather and enhance their appearance. It doesn’t support structural loads, offering design flexibility and energy efficiency.

Wall Systems 64

Wall Systems Structural Systems Energy Efficiency Building Materials 64

CCR Magazine

MARCH 26, 2025

The use of renewable materials is also gaining momentum, reducing waste and improving building performance. Businesses are increasingly opting for solar panels, green roofs, and energy-efficient systems, which help lower costs, reduce carbon emissions, and create eco-friendly, functional spaces.

Renewable Energy Systems 52

Renewable Energy Systems Sustainability Energy Efficiency Painting/finishing 52

UK Construction Blog

MARCH 14, 2025

An upgraded electrical system supports your maintenance activities effectively. Build or purchase a bench 36-40 inches high with a solid hardwood or metal top that can withstand heavy tools and parts. Install wall-mounted pegboards or slatwall systems to hang frequently used tools within easy reach.

Maintenance 52

Maintenance Fire Protection System Installation Heavy Lifting Transportation Fire Protection Systems 52

CCR Magazine

MARCH 26, 2025

Here is a five pronged approach to DIY bug proofing your surroundings for spring: Inspect Your Surroundings Inspecting your surroundings for signs of pest infestation is the first step to controlling excessive pest activity and acing your spring DIY prep. Walls and foundations are best filled with silicone caulk for long lasting results.

Building Controls 52

Building Controls Quality Control Property Management Cost Control 52

CCR Magazine

DECEMBER 17, 2024

Commercial buildings must enhance the comfort, enjoyment, and/or productivity of each occupant. The good news is that there are numerous building materials and design concepts that can provide a leg up in the process. Acoustic Wall Panels Many modern commercial interiors are designed using the open floor plan concept.

Wall Systems 52

Wall Systems Quality Control Building Controls Building Performance Measurement 52

The Pro Builder

OCTOBER 25, 2023

The New American Home (TNAH) 2023 not only showcases stunning design and views of the Las Vegas Valley but also serves as a model of high performance in home design, from the home's natural resource efficiencies and renewable energy systems to the healthy, comfortable indoor environment it provides for its owners.

Energy Efficiency 130

Energy Efficiency Renewable Energy Systems HVAC System Installation Sustainability 130

Construction Specifier

DECEMBER 15, 2024

By Lisa May Photo Robert Casey/courtesy Tubelite With commercial architectural trends favoring expansive glass , curtain wall use is growing in newly constructed buildings. In common usage, curtain wall refers to aluminum-framed systems carrying glass, panels, louvers, or occasionally, granite or marble.

Wall Systems 52

Wall Systems Fire Protection System Installation Flooring Systems Building Performance Measurement 52

UK Construction Blog

MARCH 31, 2025

The post Why a High-Quality Plaster Finish Is the Unsung Hero of Every Construction Project: Unveiling Its Essential Role appeared first on UK Construction Blog. A high-quality plaster finish not only enhances the visual appeal of a space but plays a crucial role in its durability and functionality.

Painting/finishing 52

Painting/finishing Environmental Impact Assessment Quality Control Quality Assurance 52

UK Construction Blog

MARCH 13, 2025

Twin-wall polycarbonate panels provide excellent thermal efficiency with 80-85% light transmission, creating stable growing conditions year-round whilst reducing energy costs by up to 40%. The panels come in two primary types: twin-wall (double layer) and single-wall construction.

Wall Systems 52

Wall Systems Structural Systems Foundation Systems Building Materials Manufacturing 52

BD+C

MARCH 20, 2023

3 ways prefabrication doubles as a sustainability strategy 0 qpurcell Mon, 03/20/2023 - 11:09 Modular Building Corie Baker, AIA, shares three modular Gresham Smith projects that found sustainability benefits from the use of prefabrication. In the end, this enhanced construction quality, reduced waste, and minimized the environmental impact.

Prefabrication 128

Prefabrication Sustainability Modular Construction Renewable Energy Systems 128

Natural Building

DECEMBER 22, 2022

They make thick walls with a mixture of clay-rich mud, shredded straw and limestone slurry. The AI-controlled robot has pincher-type arms that can scoop up and move heavy globs of wet adobe that are then moved by conveyor to plywood forms. This eliminates much of the labor in building with adobe.

Wall Systems 98

Wall Systems Cost Control Building Controls Quality Control 98

CCR Magazine

FEBRUARY 17, 2025

the innovative world leader in building envelope solutions, including wall cladding systems, air barriers, coatings, and restoration systems, announces the launch of StoVentec Fiber Cement Rainscreen System , a complete ventilated rainscreen cladding system that blends sustainability, design freedom, and performance.

Fire Protection System Installation 52

Fire Protection System Installation Fire Protection Systems Wall Systems Energy Efficiency 52

Construction Specifier

DECEMBER 21, 2020

Prefabricated wall panels are individually manufactured in an offsite fabrication shop, complete with exterior cladding and fenestration, anchor system, water/air/vapor barrier(s) and flashing, insulation , and the structural framing. Building and site considerations. Donlon, PE. They are then lifted and installed onsite.

Prefabrication 98

Prefabrication Wall Systems Building Materials Manufacturing Structural Systems 98

Construction Specifier

OCTOBER 1, 2024

Curtain wall systems are ever present in today’s commercial construction marketplace. The architectural design of curtain walls must be developed alongside increasing demand for high-performing, energy-efficient solutions. Jackson, AIA Photo courtesy Simpson Gumpertz & Heger Inc.

Wall Systems 104

Wall Systems Fire Protection System Installation Project Management Consulting Steel Fabrication 104

Civil + Structural Engineer

NOVEMBER 1, 2023

By Shannon Humbert, Legacy Building Solutions Rigid-frame fabric buildings offer a permanent solution for athletic facilities. For many entities, both public and private, the need for an athletics and recreation facility comes down to two options: A permanent brick and mortar building, or a lower-cost fabric bubble.

Steel Fabrication 130

Steel Fabrication HVAC System Installation Structural Systems Fire Protection System Installation 130

Civil + Structural Engineer

MARCH 18, 2024

PEX: State-of-the-Art for Potable Water; Historical Overview of Discontinued PB Piping Materials Also Examined IRVING, Texas – A new technical document that addresses the critical differences between crosslinked polyethylene (PEX) tubing systems with polybutylene (PB) systems has been published by the Plastics Pipe Institute, Inc.

Plumbing Systems 130

Plumbing Systems Plumbing Piping Installation Wall Systems 130

BDC Network

MAY 29, 2024

Compelling Conversations: Panelized Walls for Multifamily Projects 1 kcichowicz Wed, 05/29/2024 - 10:37 Learn why a Colorado-based framing contractor favors panelized walls over traditional framing in APA’s Compelling Conversations. DL Cohen says it offers a level of service and quality unavailable in traditional framing.

Wall Systems 105

Wall Systems Building Code Compliance Site Planning Quality Control 105

Construction Specifier

NOVEMBER 4, 2022

When designing and building high-profile high-rises, a unitized curtain wall system is often the favored facade solution, for more reasons than just highlighting the skyline. The benefits of this approach range from manufacturing, quality control, onsite installation speed, and enhanced water resistance.

Wall Systems 52

Wall Systems Structural Systems Controls Manufacturing Building Design 52

Construction Specifier

NOVEMBER 28, 2024

By Amy Becker Photo courtesy Fenestration and Glazing Industry Alliance (FGIA) Specifiers and design professionals should always consider seismic performance attributes for buildings in areas that previously have experienced the damaging effects of earthquakes. Building codes are adopted with the intent to preserve life and safety.

Building Performance Measurement 52

Building Performance Measurement Wall Systems Building Code Compliance Structural Systems 52

Construction Specifier

DECEMBER 29, 2021

In the 20 th century, wall assemblies discretized into multi-layered systems with each playing a distinct role. Each new layer arose with the emergence of building science technology, including rain screen design principles and the evolution of building materials. Photo courtesy David E. By David E. Image courtesy PIMA.

Wall Systems 98

Wall Systems Building Materials Manufacturing Fire Protection Systems Building Codes 98

UK Construction Blog

MARCH 4, 2025

This made me look for different ways to build a home. These include energy-saving windows and systems to save water. The best part is that container homes take less time to build. This gave me a chance to use fewer new building materials. It also reduces the environmental damage that comes from building regular homes.

Ceiling Systems 52

Ceiling Systems Roofing Systems Structural Systems Material Storage 52

UK Construction Blog

MARCH 4, 2025

Using state-of-the-art CNC machinery and digital controls, today’s stair manufacturers can transform even the simplest sketch into a comprehensive plan tailored to your exact specifications. CNC (Computer Numerical Control) machinery can cut materials to sub-millimetre accuracy, ensuring perfect fits during installation.

Staircases 52

Staircases Building Materials Manufacturing Engineering Controls Manufacturing 52

BDC Network

MAY 3, 2024

Advancing Healthcare: Medical Office Buildings at the Forefront of Access and Safety 1 kcichowicz Fri, 05/03/2024 - 07:18 Healthcare Facilities This article explores the pivotal shift from traditional hospital settings to Medical Office Buildings (MOBs), focusing on how these facilities enhance patient access.

Building Code Compliance 91

Building Code Compliance Building Controls Facility Management Cost Control 91

Construction Specifier

DECEMBER 29, 2021

Photos courtesy Armstrong Ceiling & Wall Solutions. A critical part of re-entry is assuring employers are providing a safe, healthy environment with improved indoor air quality. A critical part of re-entry is assuring employers are providing a safe, healthy environment with improved indoor air quality. Jennings, PE.

HVAC System Installation 98

HVAC System Installation Ceiling Systems HVAC Systems Quality Control 98

Construction Specifier

MAY 2, 2023

Harvard University Science and Engineering Complex (SEC) in Boston, Massachusetts, uses a specially designed hydroformed tensile facade system made of stainless steel to maximize energy efficiency and provide occupant comfort. The facade’s stainless-steel material is both delicate and lightweight, mimicking the qualities of fabric.

Energy Efficiency 105

Energy Efficiency Steel Fabrication Flooring Systems Wall Systems 105

Construction Marketing

MARCH 30, 2023

This article delves into the five most crucial ones, such as military shelter systems and remote research stations, to ensure structural integrity, functionality, and longevity. When designing military shelter systems , the material choice becomes even more critical.

Building Design 115

Building Design Renewable Energy Systems Structural Systems Energy Efficiency 115

Construction Specifier

JULY 16, 2020

Construction of wall, floor, and roof systems offsite has multiple advantages, including compressing the project schedules, reducing site labor and waste, improving consistency and quality control, and increasing safety for workers. Photo courtesy South Valley Prefab and the Association of the Wall and Ceiling Industry.

Wall Systems 95

Wall Systems Steel Fabrication Flooring Systems Painting/finishing 95

UK Construction Blog

MARCH 4, 2025

From simple DIY projects like painting walls in light colours to installing affordable storage solutions that maximise vertical space, you can create a functional, visually appealing extension of your living space. Create specific zones for tools, gardening equipment, sports gear and automotive supplies to establish a logical system.

Electrical Wiring Installation 52

Electrical Wiring Installation Material Storage Flooring Systems Ceiling Systems 52

Construction Specifier

JUNE 13, 2023

Paulson Center is a new multipurpose campus building aligned with the university’s Climate Action Plan, aiming to be one of the greenest urban campuses in the U.S. The building embodies the spirit of the university and fosters fresh ways to learn, connect, work, play, and live. In addition to an efficient filtration system, the John A.

Flooring Systems 97

Flooring Systems Ceiling Systems Structural Systems Roofing Systems 97

BD+C

MARCH 22, 2023

While the cost of many building materials leveled out over the end of 2022, that followed the dramatic price increases of the preceding years. This is enough to make anyone involved in construction projects anxious, but health systems face a host of additional pressures. The problem they face is two-fold: Ongoing supply chain issues.

Prefabrication 97

Prefabrication Wall Systems Structural Systems Building Materials Manufacturing 97

UK Construction Blog

FEBRUARY 21, 2025

With rising material costs, environmental concerns, and increasing regulations, contractors and developers are searching for ways to build cost-effective yet durable structures. These materials come from demolished buildings and are repurposed for new construction, reducing waste and cutting material costs.

Masonry 52

Masonry Sustainability Renewable Energy Systems Energy Efficiency 52

Construction Specifier

NOVEMBER 29, 2024

Decades later, these innovative floors remain a smart and efficient solution for many commercial spaces, balancing comfort for occupants and long-term performance for facility managers and building owners. Seams are chemically welded during installation to create a wall-to-wall impermeable moisture barrier.

Flooring Systems 59

Flooring Systems Building Resilience Building Performance Measurement Environmental Impact Assessment 59