Civil + Structural Engineer

JUNE 27, 2023

Salas O’Brien is excited to announce that its Denver-based structural engineering team has been recognized by the Cold-Formed Steel Engineers Institute (CFSEI) with the first place Design Excellence Award in Non-Building Applications for the CFS design of the Park Union Bridge in Colorado Springs, Colorado.

Structural Systems 246

Structural Systems Building Materials Manufacturing Building Design Wall Systems 246

CCR Magazine

MARCH 3, 2025

The construction industry is shifting toward more efficient project delivery methods, and Design-Build has emerged as one of the most effective approaches. Unlike the traditional design-bid-build process, where design and construction are handled separately, design-build consolidates both under a single contract.

Building Design 52

Building Design Building Permits Quality Control Cost Control 52

Civil + Structural Engineer

DECEMBER 10, 2024

Roadway Project Manager, Michael Baker International Located in the 1,500-acre Chicopee Woods Nature Preserve in North Georgia, the Elachee Nature Science Center is an education center that serves more than 35,000 students from over 35 school systems and an additional 30,000 visitors to the museum and preserve each year. By Chad Havens, P.E.,

Project Management Consulting 130

Project Management Consulting Environmental Impact Assessment Environmental Consulting Schedule Management 130

Civil + Structural Engineer

MAY 13, 2024

Bethlehem, PA – www.MBCEA.org – The Metal Building Contractors and Erectors Association (MBCEA) announced its 2024 Building of the Year winners at the 55 th Annual MBCEA Conference, held April 24 – 26 in San Diego, California. Building of the Year: The Truck Center Companies sales and service center in Mankato, MN.

Roofing Systems 264

Roofing Systems Wall Systems Flooring Systems Structural Systems 264

The Pro Builder

MARCH 8, 2024

A System that Takes Developers and Builders from Design to Completion qpurcell Fri, 03/08/2024 - 11:41 When the team behind the design-build company Shibusa Systems researched the causes of the U.S. Reynolds, cofounder, president, and CEO, Shibusa Systems. Fewer people can build many more homes per year.”

Plumbing Systems 264

Plumbing Systems Roofing Systems Flooring Systems Wall Systems 264

Civil + Structural Engineer

OCTOBER 1, 2024

ACI Certificate Programs, delivered through ACI University, encourage concrete professionals to gain in-depth knowledge about particular topics in concrete materials, design, repair, or construction by following a defined online course of study. and learn more about designing and detailing with GFRP reinforcement. ACI CODE-440.11-22

Building Codes 223

Building Codes Building Materials Manufacturing Structural Systems Building Materials 223

The Pro Builder

MAY 29, 2024

This home will showcase the benefits of structural 3D construction including efficiency, low cost of ownership, and the ability to withstand natural and manmade disasters,” remarked Mike Miceli, CEO of Black Buffalo 3D. Black Buffalo 3D-printed home building process. Why is ICC-ES certification important?

Building Code Compliance 261

Building Code Compliance Building Codes Wall Systems Structural Systems 261

Civil + Structural Engineer

NOVEMBER 27, 2023

UF), a leading manufacturer of quality fiberglass pipe, conduit and bridge drain infrastructure systems based in Springfield, Ohio. UF’s high-performance fiberglass conduit products are produced by winding the material in exacting patterns, which results in stronger and lighter structures over steel.

Building Materials Manufacturing 259

Building Materials Manufacturing Steel Fabrication Structural Systems Infrastructure Development 259

Civil + Structural Engineer

APRIL 18, 2024

She joins SGH’s Building Technology Division in Chicago, Illinois, partnering with SGH team members and clients across the Midwestern United States. She found her passion in building enclosure consulting, with particular expertise in new construction consulting on BECx projects to create well-functioning and integrated building systems.

Building Commissioning 130

Building Commissioning Building Design Project Management Consulting Roofing Systems 130

Civil + Structural Engineer

DECEMBER 1, 2023

It features elements that maximize the safety, security, and efficiency of the travel process including 100 percent automated screening lanes, 100 percent facial recognition “e-gates” for international departure, an innovative landside terminal design, and 100 percent trackable RFID Independent Carrier System.

Engineering 264

Engineering Concrete Pouring Plumbing Systems Structural Systems 264

Civil + Structural Engineer

OCTOBER 26, 2023

Protective barrier walls will separate new 12-foot-wide shared-use paths, featuring scenic overlooks and shade structures, from traffic. ” The new Brooks Bridge will measure 2,111 feet (793 feet longer than the current one) and feature six travel lanes (three eastbound and three westbound) versus the current four-lane structure.

Structural Systems 279

Structural Systems Safety Regulations Building Resilience Wall Systems 279

The Pro Builder

JUNE 2, 2023

But as it turns out, there may be bigger opportunities for the polystyrene foam to benefit our daily lives—and it comes in the form of building homes. Vero Building Systems , a building materials manufacturing company, has begun production of its lightweight structural concrete insulated panels (SCIP).

Fire Protection System Installation 238

Fire Protection System Installation Building Materials Manufacturing Fire Protection Systems Building Resilience 238

The Pro Builder

APRIL 23, 2024

Light But Tough: MDLR Brands’ Building Panels qpurcell Tue, 04/23/2024 - 09:33 The building panels manufactured by Tennessee-based MDLR Brands are so lightweight that just four people can carry a panel sheet measuring 8 by 32 feet. MDLR Brands’ composite SIPs (structural insulated panels) weigh in at just over 1 pound per square foot.

Modular Construction 264

Modular Construction Building Materials Manufacturing Controls Manufacturing Structural Systems 264

Civil + Structural Engineer

MAY 1, 2024

Sustainable site design is a hot topic in the AEC industry. As Civil Engineers, Landscape Architects, and Planners, we are challenged to integrate conservation into site design, preserving the natural features of the land. We must also think about ways to improve design to promote a healthier and more sustainable lifestyle.

Sustainability 264

Sustainability Green Building Electrical Systems Site Planning 264

Civil + Structural Engineer

MAY 8, 2024

By Dan Straub, Civil Segment Manager at PERI USA Why Innovative Formwork Systems Are Key to Enhancing Bridge Construction Your daily commute likely takes you over heavily traveled bridges both large and small, whether you are in your own car or using public transportation. Even more alarming: Seven percent are structurally deficient.

Structural Systems 264

Structural Systems Infrastructure Development Construction Equipment Modular Construction 264

Construction Specifier

OCTOBER 15, 2024

The University of Massachusetts Amherst’s School of Public Health & Health Services (SPHHS) building is being constructed. Image courtesy Leers Weinzapfel Associates The University of Massachusetts Amherst’s School of Public Health & Health Services (SPHHS) building is currently under construction.

Building Design 111

Building Design Flooring Systems Building Controls Building Materials 111

Civil + Structural Engineer

OCTOBER 30, 2023

New Sydney icon wins unprecedented seven awards, demonstrates importance of structure renewal to mitigate climate change Chicago (GLOBE NEWSWIRE) — The Council on Tall Buildings and Urban Habitat (CTBUH) announced the winner of its annual award for best tall building worldwide: Quay Quarter Tower , in Sydney.

Renewable Energy Systems 264

Renewable Energy Systems Green Building Building Performance Measurement Real Estate Development 264

Civil + Structural Engineer

AUGUST 31, 2023

The 140-year-old steel truss structure connects West Newbury, Merrimac and Haverhill residents as well as several Southern New Hampshire towns, making it one of Massachusetts’ most heavily travelled bridges. CCG has the design-build and structural fabrication expertise to provide engineered systems and OEM solutions.

Steel Fabrication 264

Steel Fabrication Building Materials Manufacturing Structural Systems Building Optimization 264

Civil + Structural Engineer

SEPTEMBER 9, 2024

By Luke Carothers Recently, there has been a push within the AEC industry—particularly within the United States—to shift our focus to new ways to adapt and reuse old buildings to fit new purposes. When it comes to applying this way of thinking to new builds, Sullivan says we should be thinking about potential future uses of spaces.

Structural Systems 262

Structural Systems Building Design Sustainability Architecture 262

Civil + Structural Engineer

SEPTEMBER 25, 2023

CHICAGO – Oregon State University has won the Precast/Prestressed Concrete Institue’s (PCI) 2023 Engineering Design Competition, also known as the Big Beam Competition. Teams of students and a faculty advisor design, build, and test a 20-foot, precast, prestressed concrete beam.

Structural Systems 262

Structural Systems Quality Assurance Building Design Infrastructure Development 262

The Pro Builder

APRIL 18, 2024

Designed and built by Las Vegas custom builder Sun West Custom Homes , the 7,800-square-foot, single-level custom spec home sits high above the Las Vegas Valley and famous Strip. Though it was no easy task, this year’s build followed a proven process that can be applied to any home at any price point.

Renewable Energy Systems 243

Renewable Energy Systems Energy Efficiency Energy Conservation Wall Systems 243

Civil + Structural Engineer

JANUARY 25, 2024

Coming to the new 2024 International Residential Code (IRC) LAS VEGAS – Today, the Post-Tensioning Institute (PTI) announced the launch of its Stronger Standards, Exceptional Structures campaign, in preparation for the release of the new 2024 International Residential Code (IRC). The newly added Section R506.2—Post-tensioned

Building Codes 263

Building Codes Building Materials Manufacturing Flooring Systems Structural Systems 263

Civil + Structural Engineer

APRIL 18, 2023

T2D2 makes it easier, quicker, and less expensive to inspect structures, and enables users to proactively identify damage and defects before they become major issues. T2D2 is an important tool for inspection professionals as well as building owners and managers who are looking to preserve the value and structural integrity of their assets.

Inspection 245

Inspection Building Information Modeling (BIM) Structural Systems Building Resilience 245

Roads Online

NOVEMBER 26, 2024

This revolutionary construction method has been instrumental in transforming Australia’s infrastructure landscape, enabling the creation of robust, long-lasting structures across various sectors. Reinforced Earth has been designing and constructing civil infrastructure projects for 50 years. To read the magazine, click here.

Infrastructure Development 105

Infrastructure Development Geotechnical Engineering Wall Systems Building Materials Manufacturing 105

Civil + Structural Engineer

APRIL 1, 2024

PERI Delivers Flexible Formwork Solutions for Los Angeles Oil Terminal The Port of Los Angeles includes seven liquid petroleum build terminals comprising an area of more than 114 acres. Custom Designed Systems The team selected PERI’S VARIOKIT RCS Truss System for the falsework to pour the main concrete platform.

Concrete Pouring 258

Concrete Pouring Modular Construction Structural Systems Health Regulations 258

Civil + Structural Engineer

DECEMBER 6, 2023

Stantec , a global leader in sustainable design and engineering, has been selected to provide architectural, structural, and design services for this new flagship facility. The firm is partnering with RJC Engineers on structural design, and GHD is providing electrical design services.

Renewable Energy Systems 261

Renewable Energy Systems Electrical Systems Facility Management Energy Efficiency 261

Civil + Structural Engineer

JANUARY 30, 2025

COLUMBIA, SC STV, a leading professional services firm that plans, designs and manages infrastructure projects across North America, today announced it has played a key role in securing a $204 million Federal Railroad Administration (FRA) Railroad Crossing Elimination (RCE) Grant for the City of Columbia, South Carolina.

Stakeholder Engagement 100

Stakeholder Engagement Project Management Building Design Facility Management 100

Civil + Structural Engineer

APRIL 19, 2024

The construction or renovation of buildings accounts for approximately 39% of the total global energy-related carbon emissions each year. That category refers to the total greenhouse gas emissions generated over the lifecycle of a building, road or any type of infrastructure. Embodied carbon contributes another 11%. The Kenneth G.

Renewable Energy Systems 263

Renewable Energy Systems Energy Efficiency Electrical Systems Building Materials 263

Civil + Structural Engineer

MARCH 4, 2024

The development’s design features outdoor terraces, shops, and cafes, continuously drawing in visitors to the area. The 525,000-square foot, 17-story building features two floors of restaurant and retail space and 15 stories of office space, occupied by Amazon’s Boston Tech Hub. MAXIMO is significantly faster than conventional panel.

Concrete Pouring 264

Concrete Pouring Wall Systems Flooring Systems Building Optimization 264

Civil + Structural Engineer

MAY 1, 2023

The benefits of offsite construction, which comprises the manufacturing, planning, design, fabrication, and assembly of building elements offsite are expansive. The Structural Building Components Association (SBCA) conducted studies in 1995 and 2015 and compiled the results into a comprehensive report “Framing the American Dream.”

Building Materials Manufacturing 246

Building Materials Manufacturing Steel Fabrication Building Information Modeling (BIM) Modular Construction 246

Civil + Structural Engineer

MAY 10, 2024

However, these structures must also meet present-day needs, necessitating upgrades aligned with modern technology, building codes, and energy requirements. Renovations were carried out with the utmost respect for the original design and materials, ensuring that any changes blended seamlessly with the existing structure.

Historic Preservation 189

Historic Preservation Energy Efficiency HVAC System Installation Structural Systems 189

Civil + Structural Engineer

OCTOBER 4, 2023

WASHINGTON, DC – The American Iron and Steel Institute (AISI) has published AISI D250-23, “Thermal Design and Code Compliance Guide for C-Shape Cold-Formed Steel Framing in Building Envelopes.” This document is designed to meet a variety of user needs,” said Jay Larson, P.E.,

Building Code Compliance 130

Building Code Compliance Building Codes Building Design Energy Conservation 130

Civil + Structural Engineer

AUGUST 1, 2023

In the latest edition, the nation scored a C- on the overall assessment, indicating that while overall these systems are in fair condition, they exhibit deficiencies and increasing vulnerabilities. However, soil stabilization and improving the structural performance of MSE walls are not mutually exclusive.

Wall Systems 246

Wall Systems Environmental Impact Assessment Structural Systems Building Resilience 246

Construction Enquirer

MAY 9, 2023

Structural building components specialist ACS Stainless Steel Fixings (ACS) has launched Intex Fire Protect. It is the first masonry support system combining four critical components in one easy-to-fit design – meaning it is over 40% faster to install.

Fire Protection System Installation 227

Fire Protection System Installation Fire Protection Systems Masonry Wall Systems 227

The Pro Builder

OCTOBER 11, 2023

PhiusCon 2023 Heads to Houston, Texas qpurcell Wed, 10/11/2023 - 11:03 PhiusCon, the leading passive building conference for climate-specific zero energy design, construction, and building science, heads to Houston this November 7-10, 2023. Closing Keynote from Joseph Lstiburek, B.A.Sc.,

Building Resilience 264

Building Resilience Building Standards Quality Assurance Building Design 264

Construction Specifier

JANUARY 26, 2025

Photo courtesy Intertek As building codes and standards evolve, the demand for airtight, environmentally friendly building enclosures increases among building owners, insurers, and design professionals. Air barriers are essential for maintaining the integrity and performance of building enclosures.

Building Code Compliance 64

Building Code Compliance Building Performance Measurement HVAC System Installation Fire Protection System Installation 64

CCR Magazine

FEBRUARY 17, 2025

By 2050, nearly 50% of all emissions generated by new construction are expected to come from building materials like concrete. For example, by 2030, all structures 10,000 square feet or larger in California must reduce carbon in building materials by 20%, according to the U.S. Green Building Council.

Building Materials Manufacturing 78

Building Materials Manufacturing Green Building Wall Systems Structural Systems 78