Specification Product Update

JUNE 15, 2023

Metal building envelope specialist SIG Building Solutions has launched a warranted twin skin system called ‘Gemello’. Gemello, is a self-supporting roof and wall system consisting of a trapezoidal pre-finished steel liner and outer sheet with a Class A1 non-combustible glass fibre insulation in between.

Wall Systems 52

Wall Systems Roofing Systems Building Materials Manufacturing Warranty 52

Civil + Structural Engineer

MAY 1, 2023

In Part II of a two-part series, industry pros focus on the multiple benefits offered by offsite construction with increased challenges from inflation, labor shortages, materials availability, and a push to increase sustainability on construction projects. Ochs: To put it simply, using offsite construction saves time and money.

Building Materials Manufacturing 246

Building Materials Manufacturing Steel Fabrication Modular Construction Building Information Modeling (BIM) 246

Construction Specifier

OCTOBER 1, 2024

Curtain wall systems are ever present in today’s commercial construction marketplace. The architectural design of curtain walls must be developed alongside increasing demand for high-performing, energy-efficient solutions. Jackson, AIA Photo courtesy Simpson Gumpertz & Heger Inc.

Wall Systems 93

Wall Systems Fire Protection System Installation Project Management Consulting Steel Fabrication 93

CivilJungle

MARCH 24, 2021

What Is a Retaining Wall? A retaining wall is a design of a structure ; it is built when there is a desired change in ground elevation and to resist the lateral pressure of soil that exceeds the repose angle of the soil. At different levels on the two sides supporting soil laterally retaining, walls are used.

Wall Systems 97

Wall Systems Concrete Pouring Foundation Systems Structural Systems 97

Construction Specifier

JANUARY 26, 2024

By Greg Koch As energy codes and sustainability standards continue to drive industry innovation, specifiers can now choose curtain wall systems that waste significantly less energy than their predecessors. It has been a very slow process, but material developments in this sphere are now gaining in popularity. From polyamide 6.6

Building Materials Manufacturing 119

Building Materials Manufacturing Wall Systems Energy Efficiency Structural Systems 119

Civil + Structural Engineer

MARCH 4, 2024

CLEVELAND, OHIO – MBMA.com: The Metal Building Manufacturers Association (MBMA) presented Dr. James Fisher with the 2024 Dr. Duane S. Named after MBMA’s original director of research and engineering, this honor is given to a researcher annually for contributions to the advancement of metal building systems.

Building Materials Manufacturing 130

Building Materials Manufacturing Wall Systems Structural Systems Building Codes 130

CCR Magazine

NOVEMBER 7, 2024

ClarkDietrich, a leading manufacturer of building products for exterior finishing applications, is adding two new components to its E-Screen™ entangled mesh rainscreen rolls providing a complete exterior cladding moisture management system compliant with ASTM performance criteria. </p>

Building Materials Manufacturing 52

Building Materials Manufacturing Wall Systems Painting/finishing Building Products Distribution 52

The Pro Builder

JULY 13, 2023

Horton Buys 250,000 Grass-Made, Structural Panels from Plantd qpurcell Thu, 07/13/2023 - 09:24 The nation’s largest homebuilder, D.R. Horton , is collaborating with innovative startup Plantd to install 250,000 alternative structural panels in over 1,000 homes. RELATED: Sustainable, Structural Panels Made From Grass Aside from D.R.

Building Materials Manufacturing 246

Building Materials Manufacturing Building Automation Structural Systems Electrical Systems 246

Civil + Structural Engineer

JUNE 27, 2023

Salas O’Brien is excited to announce that its Denver-based structural engineering team has been recognized by the Cold-Formed Steel Engineers Institute (CFSEI) with the first place Design Excellence Award in Non-Building Applications for the CFS design of the Park Union Bridge in Colorado Springs, Colorado.

Structural Systems 246

Structural Systems Building Materials Manufacturing Building Design Wall Systems 246

Civil + Structural Engineer

APRIL 25, 2023

WASHINGTON, DC – A research project progressing from the American Iron and Steel Institute’s (AISI) Small Project/Fellowship Program has received significant funding through the National Science Foundation (NSF) to advance performance-based fire design for cold-formed steel (CFS) structures. Thomas Gernay, Ph.D.,

Fire Protection Systems 242

Fire Protection Systems Structural Systems Building Design Building Materials Manufacturing 242

Civil + Structural Engineer

NOVEMBER 1, 2023

After 80 years of continuous operation the building required significant upgrades to provide tenants with code compliant, state-of-the-art facilities and Class A office space. A building-wide life safety analysis determined that the two existing egress stairs were insufficient to meet the population based on current building codes.

Flooring Systems 130

Flooring Systems Building Code Compliance Structural Systems Roofing Systems 130

Civil + Structural Engineer

NOVEMBER 1, 2023

By Shannon Humbert, Legacy Building Solutions Rigid-frame fabric buildings offer a permanent solution for athletic facilities. For many entities, both public and private, the need for an athletics and recreation facility comes down to two options: A permanent brick and mortar building, or a lower-cost fabric bubble.

Steel Fabrication 130

Steel Fabrication HVAC System Installation Structural Systems Fire Protection System Installation 130

BDC Network

APRIL 21, 2023

The Role of Engineered Wood in Sustainable Structures 1 kcichowicz Fri, 04/21/2023 - 11:23 Sustainability in construction is becoming more important as society moves towards a more sustainable future. Learn about engineered wood’s key role as a green building solution. What Makes a Sustainable Structure?

Sustainability 97

Sustainability Building Materials Manufacturing Engineering Renewable Energy Systems 97

The Pro Builder

APRIL 22, 2023

Rather, it employed an off-site construction method that built all of the wall panels, floor panels, and roof trusses in a nearby factory and assembled them on site in fewer than three days. No cutting (or recutting) of materials required, hence the notable lack of any construction din. he was struck by an eerie silence.

Building Information Modeling (BIM) 246

Building Information Modeling (BIM) Modular Construction Building Materials Manufacturing Flooring Systems 246

BD+C

MARCH 31, 2023

Voice of the Brand When hurricanes, tornados, extreme temperatures, snow and ice, or salty ocean air have the potential to impact a structure, it is critical to design a building envelope system that will protect the occupants from the elements and deliver a comfortable environment.

Zoning 105

Zoning Fire Protection System Installation Fire Protection Systems Building Performance Measurement 105

Construction Specifier

DECEMBER 1, 2023

By Kevin Haynes Designing the transition between an effective air barrier and fenestration, such as curtain wall and storefront, can present challenges for the designer and specifier. An effective AWB controls both air leakage and vapor diffusion through the building envelope, helping prevent materials’ deterioration.

Wall Systems 59

Wall Systems Building Materials Manufacturing Controls Manufacturing Cost Control 59

Construction Specifier

DECEMBER 29, 2021

In the 20 th century, wall assemblies discretized into multi-layered systems with each playing a distinct role. Each new layer arose with the emergence of building science technology, including rain screen design principles and the evolution of building materials. By David E. Image courtesy PIMA.

Wall Systems 98

Wall Systems Building Materials Manufacturing Fire Protection Systems Building Codes 98

Civil + Structural Engineer

DECEMBER 6, 2023

Innovative building designed to collect, preserve and make all records available to the public Acclaimed national interdisciplinary design firm HGA is pleased to announce the completion of the Pennsylvania State Archives, located in Harrisburg, Pennsylvania. HGA partnered with Vitetta in the design of the new facility.

Historic Preservation 201

Historic Preservation Flooring Systems Roofing Systems Wall Systems 201

Wolgast Corporation

JUNE 14, 2023

Precast Concrete Wall Panel Options for Construction Efficiency Construction efficiency is a critical factor that can significantly impact timelines and overall project success. Wall panel system construction is gaining popularity due to its labor and time savings to erect a building envelope.

Concrete Pouring 91

Concrete Pouring Wall Systems Building Materials Manufacturing Structural Systems 91

Construction Specifier

DECEMBER 1, 2023

By Kevin Haynes Designing the transition between an effective air barrier and fenestration, such as curtain wall and storefront, can present challenges for the designer and specifier. An effective AWB controls both air leakage and vapor diffusion through the building envelope, helping prevent materials’ deterioration.

Wall Systems 52

Wall Systems Building Materials Manufacturing Controls Manufacturing Cost Control 52

The Pro Builder

JANUARY 2, 2024

Their collaboration enables homeowners or builders to select from Hereabout’s list of preexisting, ready-to-use design plans, then build the home using B.PUBLIC’s prefab floor, roof, and wall panels. Manufacturing the panels in climate-controlled factories also results in 95% less waste and 30% faster home construction, per B.PUBLIC.

Building Performance Measurement 264

Building Performance Measurement Building Materials Manufacturing Modular Construction Building Codes 264

Construction Specifier

JUNE 5, 2024

By Karine Galla Air and water-resistive barrier systems play a crucial role in the longevity and performance of commercial buildings, and safeguarding against issues such as excessive energy consumption and moisture-related damage. They promote drying because they allow vapor from inside the building to diffuse to the outside.

Building Code Compliance 59

Building Code Compliance HVAC System Installation Renewable Energy Systems Building Materials Manufacturing 59

The Pro Builder

OCTOBER 25, 2023

The New American Home (TNAH) 2023 not only showcases stunning design and views of the Las Vegas Valley but also serves as a model of high performance in home design, from the home's natural resource efficiencies and renewable energy systems to the healthy, comfortable indoor environment it provides for its owners.

Energy Efficiency 130

Energy Efficiency Renewable Energy Systems HVAC System Installation Sustainability 130

Construction Specifier

DECEMBER 21, 2020

Prefabricated wall panels are individually manufactured in an offsite fabrication shop, complete with exterior cladding and fenestration, anchor system, water/air/vapor barrier(s) and flashing, insulation , and the structural framing. Building and site considerations. Donlon, PE.

Prefabrication 98

Prefabrication Wall Systems Building Materials Manufacturing Structural Systems 98

UK Construction Blog

AUGUST 1, 2024

The post Brick Cladding Options for External Walls appeared first on UK Construction Blog. Brick cladding enhances building aesthetics and durability. This guide covers top brick cladding options, including types, benefits, and installation tips for external walls.

Fire Protection System Installation 62

Fire Protection System Installation Wall Systems Fire Protection Systems Structural Systems 62

BDC Network

JUNE 8, 2024

Sergio Sádaba, Principal Industrial Facilities Designers Lists HVAC Mechanical Systems For most industrial factories, it’s process over people. The US manufacturing sector is booming. Manufacturing has one of the highest costs to hire, estimated at $5,100 by RecruiterBox. Manufacturing plants are often extremely hot.

Heavy Equipment Manufacturing 121

Heavy Equipment Manufacturing Fire Protection System Installation Building Materials Manufacturing HVAC System Installation 121

UK Construction Blog

JUNE 13, 2023

As the popularity of timber frame construction continues to rise in the UK, understanding the intricacies of timber frame external wall construction details UK becomes increasingly important. Short Summary Understand the theory of timber frame external wall construction, including studs and sheathing, ventilation membranes and cladding.

Fire Protection System Installation 52

Fire Protection System Installation Wall Systems Fire Protection Systems Structural Systems 52

Building Radar

JULY 25, 2024

As we progress through 2024, several emerging trends in green building technology are paving the way for more sustainable and efficient construction practices. Cross-Laminated Timber (CLT) One of the most significant innovations in green building is the use of cross-laminated timber (CLT). The Rise of Sustainable Innovations 1.

Green Building 52

Green Building Renewable Energy Systems Sustainability Energy Efficiency 52

Construction Specifier

NOVEMBER 6, 2023

Photos courtesy Polyisocyanurate Insulation Manufacturers Association ( PIMA ). energy consumption, for which minimum performance standards and building energy codes are increasing in both scope and stringency. As a result, the use of energy-efficient materials and building practices is accelerating.

Sustainability 64

Sustainability Energy Efficiency Building Materials Manufacturing Roofing Systems 64

CCR Magazine

OCTOBER 27, 2023

Siplast, a Standard Industries company, announced the addition of two high-performance polyiso wall insulation products to the company’s existing WALLcontrol™ Air & Water-Resistive Barrier (AWB) Systems, offering an exterior continuous insulation solution and supporting the company’s continued expansion into the building enclosure space.

Wall Systems 52

Wall Systems Waterproofing Systems Roofing Systems Structural Systems 52

BDC Network

MAY 29, 2024

Compelling Conversations: Panelized Walls for Multifamily Projects 1 kcichowicz Wed, 05/29/2024 - 10:37 Learn why a Colorado-based framing contractor favors panelized walls over traditional framing in APA’s Compelling Conversations. Ross Cohen explains why the company prefers panelized walls to other framing methods.

Wall Systems 105

Wall Systems Building Code Compliance Site Planning Quality Control 105

Construction Specifier

JUNE 8, 2023

By Angie Ogino Passive fire containment (PFC) systems in high-rise commercial buildings helps support a precious commodity—time—which allows occupants to safely egress a structure during a fire. This standard requires the subjection of firestopping systems to intensive and rigorous testing. Today’s U.S.

Building Codes 52

Building Codes Building Materials Manufacturing Wall Systems Building Standards 52

Civil + Structural Engineer

APRIL 20, 2023

BRONX, NY— Located in New York City’s South Bronx neighborhood of Mott Haven, the newly dedicated $175 million 425 Grand Concourse high-rise building serves as the largest Passive House project to date in North America. They are isolated from the interior slabs supporting them by structural thermal breaks.

Concrete Pouring 130

Concrete Pouring Energy Efficiency Flooring Systems Structural Systems 130

The Pro Builder

APRIL 26, 2023

Pushing Home Building Toward Off-Site Construction Founded in Ireland in 2015, Entekra launched its U.S. operating a manufacturing plant there. The company debuted its first home in August 2017, and its prefabricated panelized construction systems promised to be a game-changer for the residential construction industry.

Building Materials Manufacturing 130

Building Materials Manufacturing Prefabrication Building Automation Building Materials 130

Construction Specifier

MARCH 3, 2023

Photo © Stéphane Brügger By Alexandre Bélisle Insulated metal panels (IMPs) are gaining popularity in the construction industry as an innovative and turnkey solution for building envelopes. Designing with IMPs gives project owners, architects, and contractors a competitive edge in today’s design-build market.

Fire Protection Systems 52

Fire Protection Systems Wall Systems Structural Systems Building Materials Manufacturing 52

Construction Specifier

OCTOBER 10, 2024

Recent disruptions in supply chains, workforce shortages, and other obstacles to project schedules have led more owners and contractors to look for off-site, prefabricated construction methods to improve the quality and efficiency of their builds. Other advantages include the aesthetic quality and durability.

Lean Construction 52

Lean Construction Green Building Heavy Equipment Manufacturing Building Materials Manufacturing 52

CCR Magazine

SEPTEMBER 26, 2024

Metal structures have become a staple in modern construction due to their numerous advantages, including durability, cost-effectiveness, and flexibility in design. From towering commercial complexes to humble backyard sheds, metal buildings are revolutionizing how we conceive and construct structures. What Are Metal Buildings?

Fire Protection System Installation 52

Fire Protection System Installation Building Materials Manufacturing Building Permits Building Codes 52