CCR Magazine

MAY 9, 2024

In the evolving landscape of industrial construction, European standard overhead cranes stand out as a cornerstone for modernization and efficiency. Originating from Europe’s stringent engineering standards, these cranes are designed with a focus on lightweight construction, high precision, and energy efficiency.

Building Standards 52

Building Standards Energy Efficiency Building Materials Manufacturing Lifts 52

The Pro Builder

OCTOBER 28, 2023

At the same time, the construction industry is contending with its own set of challenges regarding workforce availability, jobsite safety, building quality, lack of materials, and building sustainability. Additionally, building in a controlled setting can reduce material waste, providing both environmental and cost benefits.

Building Codes 290

Building Codes Modular Construction Site Planning Building Materials Manufacturing 290

CCR Magazine

SEPTEMBER 20, 2023

When renovating a kitchen, one of the most important steps is choosing the right building materials. Choosing the right materials will help you create a functional, beautiful and cozy space. Style and design The choice of materials should match your kitchen style and design.

Building Materials 52

Building Materials Building Materials Manufacturing Building Design Budgeting 52

Construction Specifier

SEPTEMBER 4, 2024

The project involves constructing a new 58,528 m 2 (630,000 sf) federal building that will house CISA in a new sustainable facility. These investments aim to promote domestic manufacturing and clean energy industries.

Building Materials Manufacturing 109

Building Materials Manufacturing Green Building Building Standards Building Materials 109

Civil + Structural Engineer

MARCH 18, 2024

PEX: State-of-the-Art for Potable Water; Historical Overview of Discontinued PB Piping Materials Also Examined IRVING, Texas – A new technical document that addresses the critical differences between crosslinked polyethylene (PEX) tubing systems with polybutylene (PB) systems has been published by the Plastics Pipe Institute, Inc.

Plumbing Systems 130

Plumbing Systems Plumbing Piping Installation Wall Systems 130

Civil + Structural Engineer

JUNE 29, 2023

(San Francisco, June 6, 2023) – Kaynemaile , a leading global designer and manufacturer of architectural mesh for commercial, residential, and public buildings, today announces a major shift from fossil-based raw materials to biomass content. Makrolon® has been a consistent material solution for Kaynemaile for 20 years.

Sustainability 130

Sustainability Building Materials Manufacturing Building Materials Architecture 130

Civil + Structural Engineer

JUNE 12, 2023

Kaynemaile , a leading global designer and manufacturer of architectural mesh for commercial, residential, and public buildings, today announces a major shift from fossil-based raw materials to biomass content. Makrolon® has been a consistent material solution for Kaynemaile for 20 years.

Sustainability 130

Sustainability Building Materials Manufacturing Building Materials Architecture 130

Building Radar

OCTOBER 15, 2024

Architects play a pivotal role in determining which building products make it to their designs in the construction. Understanding what architects prioritize when selecting building product manufacturers is essential for manufacturers aiming to secure a spot in their projects.

Building Materials Manufacturing 52

Building Materials Manufacturing Building Information Modeling (BIM) Building Materials Building Standards 52

UK Construction Blog

JUNE 22, 2023

Therefore, the latest government building regulations aim to radically improve the energy performance of new homes with a greener approach to construction and home heating technology, and modernised appliances. Discover how new build homes are being constructed to meet modern energy efficiency standards.

Energy Efficiency 52

Energy Efficiency Building Standards Building Materials Manufacturing Green Building 52

Building Radar

JULY 16, 2024

The demand for high-quality materials is essential for ensuring durability, safety, and efficiency in building projects. This article delves into the leading manufacturers of construction materials globally, highlighting their contributions and impact on the industry. Key Players in the Construction Materials Industry 1.

Building Materials Manufacturing 52

Building Materials Manufacturing Building Products Distribution Building Materials Procurement 52

Civil + Structural Engineer

APRIL 4, 2024

The American Concrete Institute is a leading authority and resource worldwide for the development, dissemination, and adoption of its consensus-based standards, technical resources, educational programs, and proven expertise.

Engineering 130

Engineering Building Materials Manufacturing Building Codes Building Materials 130

The Pro Builder

JANUARY 2, 2024

Their collaboration enables homeowners or builders to select from Hereabout’s list of preexisting, ready-to-use design plans, then build the home using B.PUBLIC’s prefab floor, roof, and wall panels. Manufacturing the panels in climate-controlled factories also results in 95% less waste and 30% faster home construction, per B.PUBLIC.

Building Performance Measurement 264

Building Performance Measurement Building Materials Manufacturing Modular Construction Building Codes 264

Civil + Structural Engineer

FEBRUARY 22, 2024

The building industry currently contributes to 39% of annual CO2 emissions, with embodied carbon accounting for 11% of global annual emissions. Addressing these environmental challenges, Naviate Zero seeks to mitigate the impact by focusing on the early stages of a building’s life cycle.

Environmental Impact Assessment 100

Environmental Impact Assessment Green Building Building Design Sustainability 100

Civil + Structural Engineer

JUNE 7, 2024

The Portland Cement Association has raised a red flag, revealing that the manufacturing of a cubic yard of concrete, approximately 3900 lbs, contributes to a staggering emission of about 400 lbs of CO2. This reaction not only accelerates concrete curing but also results in a stronger and more durable material.

Sustainability 130

Sustainability Energy Conservation Curing Building Materials Manufacturing 130

Civil + Structural Engineer

JULY 19, 2023

CLEVELAND, OHIO – www.mbma.com: The Metal Building Manufacturers Association (MBMA) is pleased to welcome two new companies to its membership ranks. Ascent Buildings, LLC joins as a Building Systems member, and RMG Erectors & Constructors, LLC is a new Associate member.

Building Materials Manufacturing 100

Building Materials Manufacturing Building Codes Building Materials Building Standards 100

Civil + Structural Engineer

JULY 25, 2023

[Åshammar, Sweden] Swedish premium fastener manufacturer BUMAX has been selected to provide fasteners to be used in machines for ultrasonic metal welding. Extreme levels of vibration Schunk Sonosystems is a global leader in developing and building machines for ultrasonic metal welding – such as their industry-leading flexure sonotrode.

Building Materials Manufacturing 245

Building Materials Manufacturing Building Materials Building Standards 245

Building Radar

NOVEMBER 11, 2024

In this comprehensive guide, we explore the key strategies and best practices for building a sustainable product line in the construction industry. Implementing sustainable construction initiatives like using renewable materials can significantly reduce waste and emissions, leading to long-term benefits.

Sustainability 52

Sustainability Building Materials Manufacturing Building Optimization Energy Efficiency 52

Civil + Structural Engineer

JULY 1, 2024

The American Concrete Institute (ACI) is a leading authority and resource worldwide for the development, dissemination, and adoption of its consensus-based standards, technical resources, educational programs, and proven expertise. Among ACI’s processes, standardization stands out as the most rigorous consensus-building method.

Building Codes 130

Building Codes Building Materials Manufacturing Building Standards Masonry 130

Civil + Structural Engineer

OCTOBER 13, 2023

Bendheim’s channel glass , manufactured by Glasfabrik Lamberts of Germany, now carries both an Environmental Product Declaration (EPD) and a Health Product Declaration (HPD), supporting architects and designers’ demands for sustainability. HPDs also support compliance with WELL, Cradle-to-Cradle and other green building standards.

Building Materials Manufacturing 130

Building Materials Manufacturing Sustainability Green Building Building Materials 130

Civil + Structural Engineer

AUGUST 1, 2023

Additionally, selecting the right materials throughout the project is pivotal in enabling structures to withstand whatever Mother Nature may bring. It will also explore the broader significance of steel in sustainable building practices, highlighting the interplay between resilience and sustainability in infrastructure development.

Building Resilience 130

Building Resilience Disaster Preparedness Environmental Impact Assessment Building Materials Manufacturing 130

Civil + Structural Engineer

JULY 1, 2024

‘Mesh with the Best’ New York’s Architizer.com has awarded Kaynemaile ’s RE/8 architectural mesh an A+ Jury Award for ‘ Building Envelopes, Cladding, and Roofing ’ in its 12 th annual awards honoring the world’s best architecture and spaces. RE/8 features a reduction in the carbon footprint of the base polymer material by up to 80%.

Building Materials Manufacturing 100

Building Materials Manufacturing Architecture Building Code Compliance Roofing Systems 100

Levelset

OCTOBER 18, 2022

In recent years, material shortages and volatile material prices slowed so many projects to a grinding halt. As a result, contractors and property owners are increasingly considering alternatives to traditional building materials. Cons: Limited material availability due to reliance on byproducts from other industries.

Building Materials 52

Building Materials Concrete Pouring Building Materials Manufacturing Curing 52

CCR Magazine

OCTOBER 15, 2024

In a significant development for the building design industry, Copperweld ® Copper-Clad Aluminum (CCA) building wire has been officially accepted by MasterSpec ® , the leading specification guidance software used by architects and engineers. What is Copper-Clad Aluminum Building Wire?

Electrical Wiring Installation 52

Electrical Wiring Installation Building Materials Manufacturing Electrical Systems Energy Efficiency 52

Construction Specifier

AUGUST 15, 2023

to set general code standards requiring the reduction of embodied carbon emissions in the design and building process, applicable to both commercial buildings and schools. The code additions are amendments to the 2022 California Green Building Standards Code ( CALGreen ), Part 11, Title 24. Photo courtesy Bisgtock.

Building Code Compliance 98

Building Code Compliance Building Codes Building Standards Building Materials Manufacturing 98

Construction Marketing

DECEMBER 18, 2023

Prefab steel construction is transforming the building landscape with its innovative approach. This method utilizes prefabricated components, offering a modern alternative to traditional building practices. Companies like Price Buildings provide the pre-made parts or structures the construction team assembles on-site.

Building Materials Manufacturing 116

Building Materials Manufacturing Building Materials Building Design Material Handling 116

CCR Magazine

OCTOBER 16, 2024

Key Takeaways Certifications ensure compliance with safety standards. Certification Standards For TC Bolts Overview Of Relevant Certifications Certification for torque-controlled (TC) bolts is crucial to ensure their reliability and safety in construction. Torque-controlled bolts provide reliable connections in construction.

Building Materials Manufacturing 52

Building Materials Manufacturing Building Code Compliance Controls Manufacturing Quality Control 52

The Pro Builder

SEPTEMBER 29, 2023

Dvele , a manufacturer of high-tech prefabricated homes, is working to help solve the housing crisis by upping its production of Self-Powered homes with two new foundries. Dvele is building the new plants, one in Monterrey, Mexico, and the other in the US at a location to be announced.

Building Automation 242

Building Automation Building Materials Manufacturing Energy Conservation Energy Efficiency 242

Civil + Structural Engineer

OCTOBER 2, 2023

By Blake Heger , VP, Marketing & Sales Operations, Enduro Composites, a part of Creative Composites Group Insulated metal panels (IMPs) have been an essential building material for over 50 years. Apples to apples, composite building materials are often lighter than their metal equivalents. What are ICPs?

Building Materials Manufacturing 130

Building Materials Manufacturing Building Materials Energy Efficiency Heavy Lifting Transportation 130

Civil + Structural Engineer

AUGUST 31, 2023

It would have been nearly impossible to achieve a bridge that functioned to current safety standards yet maintained the bridge’s character and original metal latticework with a traditional concrete deck. CCG prefabricates very large, corrosion-resistant panels at its Dayton, Ohio manufacturing facility.

Steel Fabrication 264

Steel Fabrication Structural Systems Building Materials Manufacturing Building Optimization 264

CCR Magazine

NOVEMBER 7, 2024

ClarkDietrich, a leading manufacturer of building products for exterior finishing applications, is adding two new components to its E-Screen™ entangled mesh rainscreen rolls providing a complete exterior cladding moisture management system compliant with ASTM performance criteria. CFD Testing results are available upon request.

Building Materials Manufacturing 52

Building Materials Manufacturing Wall Systems Painting/finishing Building Products Distribution 52

BDC Network

APRIL 21, 2023

Learn about engineered wood’s key role as a green building solution. APA – THE ENGINEERED WOOD ASSOCIATION The increasing threat of climate change has more and more building owners and homebuyers considering the sustainability of their structures and the role construction plays in global warming and use of our natural resources.

Sustainability 97

Sustainability Building Materials Manufacturing Engineering Renewable Energy Systems 97

Civil + Structural Engineer

SEPTEMBER 1, 2023

By Luke Carothers The United States has seen a slow, but growing adoption of mass timber as a building material over the last decade. From a building and operational standpoint, mass timber is typically prefabricated, which reduces inefficiencies in the construction process–leading to less money spent on things like labor and fuel.

Building Materials Manufacturing 130

Building Materials Manufacturing Building Materials Building Codes Sustainability 130

Civil + Structural Engineer

OCTOBER 2, 2023

By Dustin Troutman , Director of Marketing and Product Development, Creative Composites Group Fiber Reinforced Polymer (FRP) composites have emerged as a top contender when it comes to construction material choices for America’s infrastructure. Traditional materials just don’t last in these types of applications,” Blaszak says.

Building Materials Manufacturing 130

Building Materials Manufacturing Heavy Equipment Manufacturing Steel Fabrication Building Materials 130

Whirlwind Steel

SEPTEMBER 5, 2024

Building for Life Blog September 5, 2024 by Whirlwind Team Steel Buildings Make a Difference, In a Good Way Steel Buildings Make a Difference, In a Good Way As sustainability becomes an increasingly important consideration in construction, steel buildings stand out as a leading option.

Building Materials Manufacturing 52

Building Materials Manufacturing Energy Efficiency Green Building Building Code Compliance 52

Civil + Structural Engineer

APRIL 25, 2023

The NSF funding will allow Dr. Gernay to build on research initiated through a 2021 AISI Small Project/Fellowship Program award for “Structural Design for Fire Conditions of a Prototype Metal Building Using the New Proposed Appendix to AISI S100, North American Specification for the Design of Cold-Formed Steel Structural Members.

Fire Protection Systems 242

Fire Protection Systems Structural Systems Building Design Building Materials Manufacturing 242

Job Order Contracting

NOVEMBER 15, 2024

Other, less stringent forms of cost estimating include the following: national average line-item cost data (with or without adjustment or localization factors), system or assembly level cost data, building level and/or other forms of parametric cost data, as well as historical cost data and economic factoring.

Insurance Management 82

Insurance Management General Contracting Building Materials Manufacturing Lean Construction 82

Civil + Structural Engineer

JUNE 10, 2024

As recovery efforts continue amidst heaps of debris, engineering experts estimate that a complete rebuild adhering to stringent safety standards could take a staggering 10-15 years using existing methodologies and design approaches. All while ensuring that projects adhere to both local and national standards and regulations.

Engineering 130

Engineering Land Use Regulations Safety Regulations Building Materials Manufacturing 130