The Pro Builder

APRIL 18, 2024

Combining Concrete and Offsite Manufacturing to Create Resilient Homes qpurcell Thu, 04/18/2024 - 12:53 Before it could build resilient , high-performing homes across the country, Onx Homes decided it first needed to prove it could do so in a challenging climate. This is not a theory. We have done it,” he says.

Building Materials Manufacturing 264

Building Materials Manufacturing Building Resilience Controls Manufacturing Building Materials 264

Construction Specifier

JUNE 20, 2024

1 The only exception noted in the code is for a coal tar based roof system. 1 The only exception noted in the code is for a coal tar based roof system. 1 One of the cardinal rules of roof design is to provide adequate slope for drainage of storm water off the roof. By Darrell L.

Roofing Systems 52

Roofing Systems Piping Installation Concrete Pouring Wall Systems 52

The Pro Builder

APRIL 23, 2024

Light But Tough: MDLR Brands’ Building Panels qpurcell Tue, 04/23/2024 - 09:33 The building panels manufactured by Tennessee-based MDLR Brands are so lightweight that just four people can carry a panel sheet measuring 8 by 32 feet. Instead, a simple pulley system and a couple of workers can maneuver and place the panels onsite.

Modular Construction 264

Modular Construction Building Materials Manufacturing Controls Manufacturing Structural Systems 264

The Pro Builder

JUNE 2, 2023

But as it turns out, there may be bigger opportunities for the polystyrene foam to benefit our daily lives—and it comes in the form of building homes. Vero Building Systems , a building materials manufacturing company, has begun production of its lightweight structural concrete insulated panels (SCIP).

Fire Protection System Installation 238

Fire Protection System Installation Building Materials Manufacturing Fire Protection Systems Building Resilience 238

Civil + Structural Engineer

MAY 1, 2023

In Part II of a two-part series, industry pros focus on the multiple benefits offered by offsite construction with increased challenges from inflation, labor shortages, materials availability, and a push to increase sustainability on construction projects. Ochs: To put it simply, using offsite construction saves time and money.

Building Materials Manufacturing 246

Building Materials Manufacturing Steel Fabrication Modular Construction Building Information Modeling (BIM) 246

GCP Applied Technologies

SEPTEMBER 14, 2020

Residential building material warranties. How to read material warranties. Review GCP material warranty. When starting a building project, whether it's renovating a house or new construction, there are so many elements to cover that warranties often get pushed to the bottom of the list. michael.delros….

Warranty 78

Warranty Building Materials Building Materials Manufacturing Roofing Systems 78

GCP Applied Technologies

SEPTEMBER 14, 2020

Residential building material warranties. How to read material warranties. Review GCP material warranty. When starting a building project, whether it's renovating a house or new construction, there are so many elements to cover that warranties often get pushed to the bottom of the list. michael.delros….

Warranty 78

Warranty Building Materials Building Materials Manufacturing Roofing Systems 78

Specification Product Update

OCTOBER 13, 2023

Metal building envelope specialist SIG Building Solutions has launched a warranted twin skin system called ‘Gemello’. Gemello, is a self-supporting roof and wall system consisting of a trapezoidal pre-finished steel liner and outer sheet with a Class A1 non-combustible glass fibre insulation in between.

Roofing Systems 52

Roofing Systems Wall Systems Building Materials Manufacturing Warranty 52

CCR Magazine

NOVEMBER 11, 2024

Re-roofing projects generate tremendous amounts of waste material that should be diverted away from landfills. The PVC (vinyl) roofing industry is committed to increasing the amount of post-consumer recycling of its products. Recycled PVC roofing can contribute to both closed-loop and open-loop processes.

Roofing Systems 52

Roofing Systems Building Materials Manufacturing Building Materials Flooring Systems 52

Specification Product Update

AUGUST 17, 2023

Metal building envelope specialist SIG Building Solutions has launched a warranted twin skin system called ‘Gemello’. Gemello, is a self-supporting roof and wall system consisting of a trapezoidal pre-finished steel liner and outer sheet with a Class A1 non-combustible glass fibre insulation in between.

Wall Systems 52

Wall Systems Roofing Systems Building Materials Manufacturing Warranty 52

The Pro Builder

FEBRUARY 15, 2024

Ways to Improve Home Building Productivity, Part 2: Automation ibush Thu, 02/15/2024 - 15:31 Home builders can maximize efficiencies gained through simplification and standardization by automating both on-site and back-office operations Tony L. Consider the potential benefits of off-site construction to your current home building process.

Building Automation 204

Building Automation Building Materials Manufacturing Site Planning Controls Manufacturing 204

Specification Product Update

JUNE 15, 2023

Metal building envelope specialist SIG Building Solutions has launched a warranted twin skin system called ‘Gemello’. Gemello, is a self-supporting roof and wall system consisting of a trapezoidal pre-finished steel liner and outer sheet with a Class A1 non-combustible glass fibre insulation in between.

Wall Systems 52

Wall Systems Roofing Systems Building Materials Manufacturing Warranty 52

Civil + Structural Engineer

SEPTEMBER 2, 2024

CLEVELAND, OHIO – www.mbma.com: The Metal Building Manufacturers Association (MBMA) has added to its a library of free, downloadable resources for architectural students and their professors with its newest publication, “The Milne Center for Ocean Science and Conservation.”

Architecture 130

Architecture Energy Conservation Building Materials Manufacturing Building Design 130

Civil + Structural Engineer

FEBRUARY 14, 2024

With increasing urgency, building owners, architects and contractors are turning to metal buildings to deliver resilient, robust and safe buildings to better mitigate risk. “In Metal buildings are highly fire resistant and have been proven to stand up against extreme weather events.

Building Resilience 130

Building Resilience Building Optimization Structural Systems Fire Protection Systems 130

Civil + Structural Engineer

APRIL 13, 2023

This is the first architectural zinc material in the world to reduce an already small carbon footprint by more than half. RHEINZINK-prePATINA ECO ZINC material production generates significantly less CO2 than any other architectural zinc manufacturing process. and Canada Green Building Councils’ LEED® criteria.

Building Materials Manufacturing 130

Building Materials Manufacturing Renewable Energy Systems Building Materials Building Resilience 130

BDC Network

OCTOBER 27, 2023

Roofing contractor installs TPO system on 228-unit multifamily housing project in Worcester, Mass. Roofing project for 228-unit multifamily housing in Worcester, Mass. rcassidy Fri, 10/27/2023 - 10:02 GAF Roofing project completed on time, despite New England winter weather conditions. Based in Westport, Mass.,

Roofing Systems 52

Roofing Systems Plumbing Systems Building Materials Manufacturing Structural Systems 52

Construction Specifier

MARCH 12, 2021

Climate and weather very much influence the design and construction of building enclosure systems, especially roof systems and assemblies. More extreme and destructive weather events are demonstrating that many of today’s building solutions might not be sufficiently resilient. Sustainability and resilience.

Roofing Systems 52

Roofing Systems Building Resilience Building Materials Manufacturing Building Codes 52

The Pro Builder

JULY 13, 2023

As a manufacturer of structural carbon-negative building materials, Plantd provides a seamless switch for homebuilders currently using Oriented Strand Board (OSB). Horton’s purchase of 250,000 Plantd panels will be used for wall sheathing and roof decking. What makes the panels alternative? factory.

Building Materials Manufacturing 246

Building Materials Manufacturing Building Automation Structural Systems Electrical Systems 246

Civil + Structural Engineer

JULY 1, 2024

‘Mesh with the Best’ New York’s Architizer.com has awarded Kaynemaile ’s RE/8 architectural mesh an A+ Jury Award for ‘ Building Envelopes, Cladding, and Roofing ’ in its 12 th annual awards honoring the world’s best architecture and spaces. RE/8 features a reduction in the carbon footprint of the base polymer material by up to 80%.

Building Materials Manufacturing 100

Building Materials Manufacturing Architecture Building Code Compliance Roofing Systems 100

The Pro Builder

JANUARY 2, 2024

Their collaboration enables homeowners or builders to select from Hereabout’s list of preexisting, ready-to-use design plans, then build the home using B.PUBLIC’s prefab floor, roof, and wall panels. Manufacturing the panels in climate-controlled factories also results in 95% less waste and 30% faster home construction, per B.PUBLIC.

Building Performance Measurement 264

Building Performance Measurement Building Materials Manufacturing Modular Construction Building Codes 264

Civil + Structural Engineer

NOVEMBER 1, 2023

After 80 years of continuous operation the building required significant upgrades to provide tenants with code compliant, state-of-the-art facilities and Class A office space. A building-wide life safety analysis determined that the two existing egress stairs were insufficient to meet the population based on current building codes.

Flooring Systems 130

Flooring Systems Building Code Compliance Structural Systems Roofing Systems 130

The Pro Builder

APRIL 22, 2023

Rather, it employed an off-site construction method that built all of the wall panels, floor panels, and roof trusses in a nearby factory and assembled them on site in fewer than three days. No cutting (or recutting) of materials required, hence the notable lack of any construction din. he was struck by an eerie silence.

Building Information Modeling (BIM) 246

Building Information Modeling (BIM) Modular Construction Building Materials Manufacturing Flooring Systems 246

Construction Specifier

SEPTEMBER 19, 2024

By Iltaz Alam and Marysusan Couturier Photo ©Chris Boswell/Dreamstime.com Ensuring a building’s durability and energy efficiency hinges on a continuous air barrier throughout the building enclosure. Critical are the tie-ins between different components and materials, which must be properly managed and installed to prevent failures.

Waterproofing Systems 52

Waterproofing Systems Building Materials Manufacturing Roofing Systems Building Materials 52

CCR Magazine

OCTOBER 9, 2024

The cause is a variety of factors, chief among them the dark, impermeable roofs used on many urban buildings. They absorb solar energy and radiate heat that is either transferred inside the building or blown off the roof to heat the surrounding air. The benefits of PVC roofing are realized immediately upon installation.

Roofing Systems 52

Roofing Systems Building Materials Manufacturing Energy Efficiency Building Materials 52

CCR Magazine

SEPTEMBER 16, 2024

recently introduced IntelliWrap™ PR permeable, self-adhering roofing underlayment to provide a water- and air-tight vapor-permeable barrier for a variety of roofing systems, including but not limited to standing seam metal, slate tile, clay tile, and cedar shingle roofs. IMETCO (Innovative Metals Company, Inc.)

Roofing Systems 52

Roofing Systems Building Materials Manufacturing Wall Systems Building Materials 52

CCR Magazine

OCTOBER 23, 2024

provider of advanced insulation systems for residential and commercial applications, with 2024E net sales of USD 136 million. OX Engineered Products develops and manufactures an innovative range of insulation solutions with proprietary technologies and trusted brands. billion in 2023. </p>

Engineering 52

Engineering Roofing Systems Building Materials Manufacturing Structural Systems 52

Civil + Structural Engineer

OCTOBER 2, 2023

By Blake Heger , VP, Marketing & Sales Operations, Enduro Composites, a part of Creative Composites Group Insulated metal panels (IMPs) have been an essential building material for over 50 years. Insulated composite panels are a nonmetallic alternative to IMPs for use on walls or roofs. What are ICPs? The first is weight.

Building Materials Manufacturing 130

Building Materials Manufacturing Building Materials Energy Efficiency Heavy Lifting Transportation 130

Civil + Structural Engineer

DECEMBER 6, 2023

Innovative building designed to collect, preserve and make all records available to the public Acclaimed national interdisciplinary design firm HGA is pleased to announce the completion of the Pennsylvania State Archives, located in Harrisburg, Pennsylvania. HGA partnered with Vitetta in the design of the new facility.

Historic Preservation 201

Historic Preservation Flooring Systems Roofing Systems Wall Systems 201

Construction Specifier

OCTOBER 1, 2024

Curtain wall systems are ever present in today’s commercial construction marketplace. Technological advancements in curtain wall design tools, materials, prototyping, and fabrication techniques offer new avenues for achieving these lofty design and performance goals. Jackson, AIA Photo courtesy Simpson Gumpertz & Heger Inc.

Wall Systems 93

Wall Systems Fire Protection System Installation Project Management Consulting Steel Fabrication 93

CCR Magazine

AUGUST 23, 2024

Metal roofing continues to claim a larger part of the market and with that growth, there is a demand for more qualified installers. METALCON is offering the opportunity to obtain hands-on experience, observing and installing metal roofing on the trade show floor. METALCON will be at the Georgia World Congress Center in Atlanta, Oct.

Roofing Systems 59

Roofing Systems Steel Fabrication Flooring Systems Building Materials Manufacturing 59

Construction Specifier

JUNE 6, 2024

The resulting 3,623 m 2 (39,000 sf) building efficiently consolidates all of the co-op’s operations under one roof. The original facility featured materials such as corrugated metal siding and had an exposed wood structure. The primary structural building material is made of cross-laminated timber (CLT).

Material Storage 59

Material Storage Building Materials Manufacturing Structural Systems Roofing Systems 59

Construction Specifier

NOVEMBER 6, 2023

Photos courtesy Polyisocyanurate Insulation Manufacturers Association ( PIMA ). energy consumption, for which minimum performance standards and building energy codes are increasing in both scope and stringency. As a result, the use of energy-efficient materials and building practices is accelerating.

Sustainability 64

Sustainability Energy Efficiency Building Materials Manufacturing Roofing Systems 64

CCR Magazine

JULY 31, 2024

The methods of installing flat roofs have gone through a lot of changes considering the design and usage of the building. Flat roofs are more stylish, and they are adaptable for the use of other facilities like roof gardens or terraces. MB roofing still demands a labor force, especially when using a torch-down method.

Fire Protection System Installation 52

Fire Protection System Installation Roofing Systems Waterproofing Systems Fire Protection Systems 52

The Pro Builder

FEBRUARY 21, 2024

Concrete Wall Panels Help Build Noncombustible Homes qpurcell Wed, 02/21/2024 - 11:24 As California’s wildfires rage and major home insurers pull out of the state , the rising risk of home fires isn’t being helped by conventional construction, says Scott Long. How to Build a Home That Won’t Combust? Villa home.

Concrete Pouring 289

Concrete Pouring Wall Systems Building Resilience Building Materials Manufacturing 289

Building Radar

JULY 25, 2024

As we progress through 2024, several emerging trends in green building technology are paving the way for more sustainable and efficient construction practices. Cross-Laminated Timber (CLT) One of the most significant innovations in green building is the use of cross-laminated timber (CLT). The Rise of Sustainable Innovations 1.

Green Building 52

Green Building Renewable Energy Systems Sustainability Energy Efficiency 52

CCR Magazine

NOVEMBER 14, 2023

A well-maintained roof protects the building and its contents and ensures the safety and comfort of occupants. However, navigating the complexities of commercial roofing can be challenging, and even a tiny mistake can lead to significant issues. Poor Installation Incorrect installation is a pervasive issue in commercial roofing.

Roofing Systems 52

Roofing Systems Building Materials Manufacturing Building Performance Measurement Material Handling 52

The Pro Builder

APRIL 26, 2023

Pushing Home Building Toward Off-Site Construction Founded in Ireland in 2015, Entekra launched its U.S. operating a manufacturing plant there. The company debuted its first home in August 2017, and its prefabricated panelized construction systems promised to be a game-changer for the residential construction industry.

Building Materials Manufacturing 130

Building Materials Manufacturing Prefabrication Building Automation Building Materials 130