Specification Product Update

OCTOBER 13, 2023

Metal building envelope specialist SIG Building Solutions has launched a warranted twin skin system called ‘Gemello’. Gemello, is a self-supporting roof and wall system consisting of a trapezoidal pre-finished steel liner and outer sheet with a Class A1 non-combustible glass fibre insulation in between.

Roofing Systems 52

Roofing Systems Wall Systems Building Materials Manufacturing Warranty 52

Specification Product Update

JUNE 15, 2023

Metal building envelope specialist SIG Building Solutions has launched a warranted twin skin system called ‘Gemello’. Gemello, is a self-supporting roof and wall system consisting of a trapezoidal pre-finished steel liner and outer sheet with a Class A1 non-combustible glass fibre insulation in between.

Wall Systems 52

Wall Systems Roofing Systems Building Materials Manufacturing Warranty 52

CCR Magazine

APRIL 10, 2024

Laminators Incorporated presents AdaptaClad™ RS, a new shop-fabricated rainscreen wall system designed to provide significant time and labor savings to fabricators and installers. Its built-in adaptability makes it possible to install over almost any building substrate. Along with the launch of their new system, Laminators Inc.

Wall Systems 52

Wall Systems Fire Protection System Installation Fire Protection Systems Structural Systems 52

CivilJungle

MARCH 24, 2021

What Is a Retaining Wall? A retaining wall is a design of a structure ; it is built when there is a desired change in ground elevation and to resist the lateral pressure of soil that exceeds the repose angle of the soil. At different levels on the two sides supporting soil laterally retaining, walls are used.

Wall Systems 97

Wall Systems Concrete Pouring Foundation Systems Structural Systems 97

Civil + Structural Engineer

MARCH 18, 2024

PEX: State-of-the-Art for Potable Water; Historical Overview of Discontinued PB Piping Materials Also Examined IRVING, Texas – A new technical document that addresses the critical differences between crosslinked polyethylene (PEX) tubing systems with polybutylene (PB) systems has been published by the Plastics Pipe Institute, Inc.

Plumbing Systems 130

Plumbing Systems Plumbing Piping Installation Wall Systems 130

The Pro Builder

JULY 18, 2023

Eco Material Technologies , a Utah-based producer of sustainable cement alternatives, and Hive 3D , a Texas-based automated construction company, have partnered to build five vacation rentals in Round Top. To replace traditional cement, Eco Material uses fly ash and other pozzolanic materials.

Building Materials Manufacturing 246

Building Materials Manufacturing Building Materials Green Building Building Resilience 246

Construction Specifier

OCTOBER 1, 2024

Curtain wall systems are ever present in today’s commercial construction marketplace. The architectural design of curtain walls must be developed alongside increasing demand for high-performing, energy-efficient solutions. Jackson, AIA Photo courtesy Simpson Gumpertz & Heger Inc.

Wall Systems 93

Wall Systems Fire Protection System Installation Project Management Consulting Steel Fabrication 93

The Pro Builder

FEBRUARY 21, 2024

Concrete Wall Panels Help Build Noncombustible Homes qpurcell Wed, 02/21/2024 - 11:24 As California’s wildfires rage and major home insurers pull out of the state , the rising risk of home fires isn’t being helped by conventional construction, says Scott Long. How to Build a Home That Won’t Combust? Villa home.

Concrete Pouring 289

Concrete Pouring Wall Systems Building Resilience Building Materials Manufacturing 289

BDC Network

SEPTEMBER 30, 2024

The importance of selecting healthy materials for K-12 projects 0 qpurcell Mon, 09/30/2024 - 13:17 K-12 Schools Clark Nexsen interior designers Anna Claire Beethoven and Brittney Just, CID, IIDA, LEED Green Associate, share why it is imperative to specify healthy building materials in K-12 schools.

Building Materials Manufacturing 98

Building Materials Manufacturing Painting/finishing Building Materials Green Building 98

Construction Specifier

JANUARY 26, 2024

By Greg Koch As energy codes and sustainability standards continue to drive industry innovation, specifiers can now choose curtain wall systems that waste significantly less energy than their predecessors. It has been a very slow process, but material developments in this sphere are now gaining in popularity. From polyamide 6.6

Building Materials Manufacturing 119

Building Materials Manufacturing Wall Systems Energy Efficiency Structural Systems 119

Civil + Structural Engineer

MARCH 4, 2024

CLEVELAND, OHIO – MBMA.com: The Metal Building Manufacturers Association (MBMA) presented Dr. James Fisher with the 2024 Dr. Duane S. Named after MBMA’s original director of research and engineering, this honor is given to a researcher annually for contributions to the advancement of metal building systems.

Building Materials Manufacturing 130

Building Materials Manufacturing Wall Systems Structural Systems Building Codes 130

The Pro Builder

JULY 13, 2023

As a manufacturer of structural carbon-negative building materials, Plantd provides a seamless switch for homebuilders currently using Oriented Strand Board (OSB). Horton’s purchase of 250,000 Plantd panels will be used for wall sheathing and roof decking. What makes the panels alternative? factory.

Building Materials Manufacturing 246

Building Materials Manufacturing Building Automation Structural Systems Electrical Systems 246

BDC Network

JUNE 18, 2024

Could ‘smart’ building facades heat and cool buildings? 0 dbarista Tue, 06/18/2024 - 15:58 Building Technology A promising research project looks at the possibilities for thermoelectric systems to thermally condition buildings, writes Mahsa Farid Mohajer, Sustainable Building Analyst with Stantec.

HVAC Systems 111

HVAC Systems Building Materials Manufacturing Electrical Systems Building Performance Measurement 111

CCR Magazine

NOVEMBER 7, 2024

ClarkDietrich, a leading manufacturer of building products for exterior finishing applications, is adding two new components to its E-Screen™ entangled mesh rainscreen rolls providing a complete exterior cladding moisture management system compliant with ASTM performance criteria. </p>

Building Materials Manufacturing 52

Building Materials Manufacturing Wall Systems Painting/finishing Building Products Distribution 52

Civil + Structural Engineer

APRIL 13, 2023

This is the first architectural zinc material in the world to reduce an already small carbon footprint by more than half. RHEINZINK-prePATINA ECO ZINC material production generates significantly less CO2 than any other architectural zinc manufacturing process. and Canada Green Building Councils’ LEED® criteria.

Building Materials Manufacturing 130

Building Materials Manufacturing Renewable Energy Systems Building Materials Building Resilience 130

Construction Specifier

OCTOBER 8, 2024

HS Walls withstand building pressure differentials, airflow, and heat loss and can be used during long installation periods. HS Interior Walls, designed for heavy-duty performance during construction or renovation. Flame Resistant – Our high-strength walls reduce flame and smoke spread for temporary walls.

HVAC System Installation 59

HVAC System Installation Wall Systems Building Materials Manufacturing HVAC Systems 59

The Pro Builder

APRIL 22, 2023

Rather, it employed an off-site construction method that built all of the wall panels, floor panels, and roof trusses in a nearby factory and assembled them on site in fewer than three days. No cutting (or recutting) of materials required, hence the notable lack of any construction din. he was struck by an eerie silence.

Building Information Modeling (BIM) 246

Building Information Modeling (BIM) Modular Construction Building Materials Manufacturing Flooring Systems 246

BDC Network

APRIL 21, 2023

Learn about engineered wood’s key role as a green building solution. APA – THE ENGINEERED WOOD ASSOCIATION The increasing threat of climate change has more and more building owners and homebuyers considering the sustainability of their structures and the role construction plays in global warming and use of our natural resources.

Sustainability 97

Sustainability Building Materials Manufacturing Engineering Renewable Energy Systems 97

The Pro Builder

JANUARY 2, 2024

Their collaboration enables homeowners or builders to select from Hereabout’s list of preexisting, ready-to-use design plans, then build the home using B.PUBLIC’s prefab floor, roof, and wall panels. Manufacturing the panels in climate-controlled factories also results in 95% less waste and 30% faster home construction, per B.PUBLIC.

Building Performance Measurement 264

Building Performance Measurement Building Materials Manufacturing Modular Construction Building Codes 264

Civil + Structural Engineer

NOVEMBER 1, 2023

After 80 years of continuous operation the building required significant upgrades to provide tenants with code compliant, state-of-the-art facilities and Class A office space. A building-wide life safety analysis determined that the two existing egress stairs were insufficient to meet the population based on current building codes.

Flooring Systems 130

Flooring Systems Building Code Compliance Structural Systems Roofing Systems 130

The Pro Builder

JANUARY 29, 2024

Lean manufacturing works. To explain his company’s manufacturing solution, Gampel first distinguishes it from other efforts to industrialize construction. You’re deploying 90% of the build using traditional skilled labor.” We focus not on the home, the end product, but on the system,” Gampel says. “We

Modular Construction 264

Modular Construction Building Materials Manufacturing HVAC Systems Plumbing Systems 264

CCR Magazine

NOVEMBER 18, 2024

the innovative world leader in claddings, air barriers, coatings, and restoration systems, is extending its high-performance acrylic-based coating line StoColor ® Acryl Plus. About Sto Sto is an international technology leader in the design and production of innovative building materials tailored to human needs.

Building Materials Manufacturing 52

Building Materials Manufacturing Wall Systems Building Materials Building Controls 52

CCR Magazine

OCTOBER 10, 2024

CertainTeed® , a leading manufacturer of sustainable building materials, announced the addition of Decoustics Impressions to its innovative ceilings and walls portfolio. Decoustics impressions are highly customizable, with an array of wood-like finish options available. </p>

Ceiling Systems 52

Ceiling Systems Building Materials Manufacturing Wall Systems Material Handling 52

Construction Specifier

DECEMBER 1, 2023

By Kevin Haynes Designing the transition between an effective air barrier and fenestration, such as curtain wall and storefront, can present challenges for the designer and specifier. An effective AWB controls both air leakage and vapor diffusion through the building envelope, helping prevent materials’ deterioration.

Wall Systems 59

Wall Systems Building Materials Manufacturing Controls Manufacturing Cost Control 59

Civil + Structural Engineer

APRIL 25, 2023

Assistant Professor in the Department of Civil and Systems Engineering at Johns Hopkins University (JHU), was named a recipient of the NSF’s Faculty Early Career Development (CAREER) Award for nearly $580,000 over five years. AISI also supported my experimental work with material donations, for which I am grateful. Thomas Gernay, Ph.D.,

Fire Protection Systems 242

Fire Protection Systems Structural Systems Building Design Building Materials Manufacturing 242

Construction Specifier

SEPTEMBER 19, 2024

By Iltaz Alam and Marysusan Couturier Photo ©Chris Boswell/Dreamstime.com Ensuring a building’s durability and energy efficiency hinges on a continuous air barrier throughout the building enclosure. Critical are the tie-ins between different components and materials, which must be properly managed and installed to prevent failures.

Waterproofing Systems 52

Waterproofing Systems Building Materials Manufacturing Roofing Systems Building Materials 52

Civil + Structural Engineer

OCTOBER 2, 2023

By Blake Heger , VP, Marketing & Sales Operations, Enduro Composites, a part of Creative Composites Group Insulated metal panels (IMPs) have been an essential building material for over 50 years. Insulated composite panels are a nonmetallic alternative to IMPs for use on walls or roofs. What are ICPs? The first is weight.

Building Materials Manufacturing 130

Building Materials Manufacturing Building Materials Energy Efficiency Heavy Lifting Transportation 130

Construction Specifier

DECEMBER 1, 2023

By Kevin Haynes Designing the transition between an effective air barrier and fenestration, such as curtain wall and storefront, can present challenges for the designer and specifier. An effective AWB controls both air leakage and vapor diffusion through the building envelope, helping prevent materials’ deterioration.

Wall Systems 52

Wall Systems Building Materials Manufacturing Controls Manufacturing Cost Control 52

Civil + Structural Engineer

JUNE 27, 2023

Salas O’Brien is excited to announce that its Denver-based structural engineering team has been recognized by the Cold-Formed Steel Engineers Institute (CFSEI) with the first place Design Excellence Award in Non-Building Applications for the CFS design of the Park Union Bridge in Colorado Springs, Colorado.

Structural Systems 246

Structural Systems Building Materials Manufacturing Building Design Wall Systems 246

Construction Specifier

DECEMBER 29, 2021

In the 20 th century, wall assemblies discretized into multi-layered systems with each playing a distinct role. Each new layer arose with the emergence of building science technology, including rain screen design principles and the evolution of building materials. By David E.

Wall Systems 98

Wall Systems Building Materials Manufacturing Fire Protection Systems Building Codes 98

Construction Specifier

JUNE 25, 2024

and Steven Gaynor, MBA Photo courtesy Tenmat New York City recently became the first jurisdiction in the country to reject and rewrite major sections of the International Building Code’s ( IBC ’s) language around fire protection in exterior facades. For decades, buildings have relied on intumescent materials for fire control.

Fire Protection System Installation 59

Fire Protection System Installation Fire Protection Systems Building Code Compliance Building Codes 59

Construction Specifier

NOVEMBER 6, 2023

Photos courtesy Polyisocyanurate Insulation Manufacturers Association ( PIMA ). energy consumption, for which minimum performance standards and building energy codes are increasing in both scope and stringency. As a result, the use of energy-efficient materials and building practices is accelerating.

Sustainability 64

Sustainability Energy Efficiency Building Materials Manufacturing Roofing Systems 64

Civil + Structural Engineer

DECEMBER 6, 2023

Innovative building designed to collect, preserve and make all records available to the public Acclaimed national interdisciplinary design firm HGA is pleased to announce the completion of the Pennsylvania State Archives, located in Harrisburg, Pennsylvania. HGA partnered with Vitetta in the design of the new facility.

Historic Preservation 201

Historic Preservation Flooring Systems Roofing Systems Wall Systems 201

BDC Network

JUNE 17, 2024

Fire-rated Glazing Supports Safer School Design 1 kcichowicz Mon, 06/17/2024 - 11:12 Fire-rated glazing supports safer school design and supports building plans that meet model building code requirements. These standards simulate how a material or system might perform when subjected to similar situations in application.

Fire Protection Systems 52

Fire Protection Systems Building Code Compliance Building Codes Building Materials Manufacturing 52

Building Radar

JULY 25, 2024

As we progress through 2024, several emerging trends in green building technology are paving the way for more sustainable and efficient construction practices. Cross-Laminated Timber (CLT) One of the most significant innovations in green building is the use of cross-laminated timber (CLT). The Rise of Sustainable Innovations 1.

Green Building 52

Green Building Renewable Energy Systems Sustainability Energy Efficiency 52

BD+C

MARCH 31, 2023

Voice of the Brand When hurricanes, tornados, extreme temperatures, snow and ice, or salty ocean air have the potential to impact a structure, it is critical to design a building envelope system that will protect the occupants from the elements and deliver a comfortable environment.

Zoning 105

Zoning Fire Protection System Installation Fire Protection Systems Building Performance Measurement 105

Construction Specifier

JUNE 5, 2024

By Karine Galla Air and water-resistive barrier systems play a crucial role in the longevity and performance of commercial buildings, and safeguarding against issues such as excessive energy consumption and moisture-related damage. They promote drying because they allow vapor from inside the building to diffuse to the outside.

Building Code Compliance 59

Building Code Compliance HVAC System Installation Renewable Energy Systems Building Materials Manufacturing 59