UK Construction Blog

FEBRUARY 1, 2024

The post Beyond Panels: The Rise of Integrated Solar Roofing and Building Materials appeared first on UK Construction Blog. One such transformative trend is the rise of integrated solar roofing and building materials. Further benefits include: 1.

Building Materials 62

Building Materials Renewable Energy Systems Energy Efficiency Roofing Systems 62

Specification Product Update

SEPTEMBER 13, 2024

voestalpine Metsec has recently published the latest version of its Steel Framing Systems (SFS) Specification Manual, the industry’s most comprehensive resource for professionals involved in the specification, installation and use of light gauge steel framing systems.

Wall Systems 52

Wall Systems Structural Systems Quality Assurance Building Codes 52

Civil + Structural Engineer

AUGUST 1, 2023

Jody Wall Every four years, the American Society of Civil Engineers (ASCE) issues a report card that grades America’s infrastructure. In the latest edition, the nation scored a C- on the overall assessment, indicating that while overall these systems are in fair condition, they exhibit deficiencies and increasing vulnerabilities.

Wall Systems 246

Wall Systems Environmental Impact Assessment Structural Systems Building Resilience 246

Civil + Structural Engineer

MAY 1, 2023

In Part II of a two-part series, industry pros focus on the multiple benefits offered by offsite construction with increased challenges from inflation, labor shortages, materials availability, and a push to increase sustainability on construction projects. Ochs: To put it simply, using offsite construction saves time and money.

Building Materials Manufacturing 246

Building Materials Manufacturing Steel Fabrication Modular Construction Building Information Modeling (BIM) 246

Construction Specifier

JANUARY 26, 2024

By Greg Koch As energy codes and sustainability standards continue to drive industry innovation, specifiers can now choose curtain wall systems that waste significantly less energy than their predecessors. It has been a very slow process, but material developments in this sphere are now gaining in popularity.

Building Materials Manufacturing 119

Building Materials Manufacturing Wall Systems Energy Efficiency Structural Systems 119

Civil + Structural Engineer

APRIL 25, 2023

Assistant Professor in the Department of Civil and Systems Engineering at Johns Hopkins University (JHU), was named a recipient of the NSF’s Faculty Early Career Development (CAREER) Award for nearly $580,000 over five years. AISI also supported my experimental work with material donations, for which I am grateful. Thomas Gernay, Ph.D.,

Fire Protection Systems 242

Fire Protection Systems Structural Systems Building Design Project Management Consulting 242

Construction Specifier

JUNE 25, 2024

and Steven Gaynor, MBA Photo courtesy Tenmat New York City recently became the first jurisdiction in the country to reject and rewrite major sections of the International Building Code’s ( IBC ’s) language around fire protection in exterior facades. For decades, buildings have relied on intumescent materials for fire control.

Fire Protection System Installation 59

Fire Protection System Installation Fire Protection Systems Building Code Compliance Building Codes 59

Construction Specifier

MAY 31, 2024

The design of contemporary cavity wall assemblies is the result of a century of trial and error. During the transition from mass masonry walls to the “four barrier” (i.e. water, air, vapor, and thermal barrier) assemblies of today’s construction, the “early veneer walls” constructed between the mid- to late-20 th century emerged.

Masonry 64

Masonry Wall Systems Building Codes Waterproofing Systems 64

BDC Network

JUNE 17, 2024

Fire-rated Glazing Supports Safer School Design 1 kcichowicz Mon, 06/17/2024 - 11:12 Fire-rated glazing supports safer school design and supports building plans that meet model building code requirements. These standards simulate how a material or system might perform when subjected to similar situations in application.

Fire Protection Systems 52

Fire Protection Systems Building Code Compliance Building Codes Building Materials Manufacturing 52

Construction Specifier

OCTOBER 10, 2023

A cover photo of the main page of AISI D250-23, “Thermal Design and Code Compliance Guide for C-Shape Cold-Formed Steel Framing in Building Envelopes.” Designers and builders will find information on the specific thermal properties of materials and elements in a building envelope assembly to comply with a local or state-adopted code.

Building Code Compliance 116

Building Code Compliance Building Codes Energy Conservation Wall Systems 116

Construction Specifier

NOVEMBER 6, 2023

energy consumption, for which minimum performance standards and building energy codes are increasing in both scope and stringency. As a result, the use of energy-efficient materials and building practices is accelerating. This has led to the growing popularity and demand for high-performance buildings.

Sustainability 64

Sustainability Energy Efficiency Building Materials Manufacturing Roofing Systems 64

The Pro Builder

OCTOBER 25, 2023

The New American Home (TNAH) 2023 not only showcases stunning design and views of the Las Vegas Valley but also serves as a model of high performance in home design, from the home's natural resource efficiencies and renewable energy systems to the healthy, comfortable indoor environment it provides for its owners.

Energy Efficiency 130

Energy Efficiency Renewable Energy Systems HVAC System Installation Sustainability 130

CCR Magazine

JUNE 4, 2024

Not only are clients increasingly conscientious, but building codes and governmental standards are raising the bar for what qualifies as “green” construction. With this in mind, comprehensive air barrier systems are becoming the new norm for creating sustainable, high-performing commercial buildings.

HVAC System Installation 52

HVAC System Installation HVAC Systems Wall Systems Structural Systems 52

Civil + Structural Engineer

NOVEMBER 1, 2023

By Shannon Humbert, Legacy Building Solutions Rigid-frame fabric buildings offer a permanent solution for athletic facilities. For many entities, both public and private, the need for an athletics and recreation facility comes down to two options: A permanent brick and mortar building, or a lower-cost fabric bubble.

Steel Fabrication 130

Steel Fabrication HVAC System Installation Structural Systems Fire Protection System Installation 130

CCR Magazine

SEPTEMBER 13, 2024

As the Middle Tennessee’s first full-service hotel built in nearly a decade, the eight-story, 244-room Hilton Franklin Cool Springs offers one of the only roof-level patios in town plus a stylish lobby and contemporary guest rooms with Tubelite thermal entrance systems and floor-to-ceiling window wall.

Painting/finishing 52

Painting/finishing Wall Systems Roofing Systems Flooring Systems 52

CCR Magazine

SEPTEMBER 10, 2024

The Cypress-Fairbanks Independent School District ( CFISD ) recently opened the new Visual and Performing Arts Center ( VPAC ) and Mark Henry Administration Building on a 26-acre site. The VPAC and Administration Building mirror each other in their design, materials and finishes, including their ceiling systems.

Ceiling Systems 52

Ceiling Systems Building Materials Manufacturing Building Resilience Building Materials 52

BDC Network

APRIL 21, 2023

Learn about engineered wood’s key role as a green building solution. APA – THE ENGINEERED WOOD ASSOCIATION The increasing threat of climate change has more and more building owners and homebuyers considering the sustainability of their structures and the role construction plays in global warming and use of our natural resources.

Sustainability 97

Sustainability Building Materials Manufacturing Engineering Renewable Energy Systems 97

Construction Specifier

JUNE 8, 2023

By Angie Ogino Passive fire containment (PFC) systems in high-rise commercial buildings helps support a precious commodity—time—which allows occupants to safely egress a structure during a fire. This standard requires the subjection of firestopping systems to intensive and rigorous testing. Today’s U.S.

Building Codes 52

Building Codes Building Materials Manufacturing Wall Systems Building Standards 52

CCR Magazine

OCTOBER 27, 2023

Siplast, a Standard Industries company, announced the addition of two high-performance polyiso wall insulation products to the company’s existing WALLcontrol™ Air & Water-Resistive Barrier (AWB) Systems, offering an exterior continuous insulation solution and supporting the company’s continued expansion into the building enclosure space.

Wall Systems 52

Wall Systems Waterproofing Systems Roofing Systems Structural Systems 52

CCR Magazine

JUNE 12, 2024

Commercial building renovations are pivotal in maintaining and enhancing the functionality, aesthetics, and value of properties. Whether updating an office building, refurbishing a retail space, or modernizing an industrial facility, the process requires careful planning, skilled execution, and a clear understanding of the goals.

Building Code Compliance 52

Building Code Compliance HVAC System Installation Renewable Energy Systems Environmental Impact Assessment 52

CCR Magazine

JULY 30, 2024

Constructing a foundation is among the most crucial steps for any building project because it bears the entire structure’s load. The structural support a foundation offers guarantees a building’s longevity and integrity, avoiding uneven settling and possible damage. Outlined below are four mistakes to avoid when building a foundation.

Foundation Systems 52

Foundation Systems Structural Systems Environmental Impact Assessment Building Materials 52

Construction Specifier

JUNE 17, 2024

2 Buildings are responsible for approximately 42 percent of CO2 emissions, 15 percent of which is attributed to the embodied carbon of materials. trillion sf) of building floorspace by 2060—equivalent space of New York City added every month for 40 years—the time for the industry to act is now.

Sustainability 105

Sustainability Building Resilience Environmental Impact Assessment Building Materials Manufacturing 105

Construction Specifier

OCTOBER 31, 2023

Designed by the architecture firm, Brooks + Scarpa, this innovative project defies traditional apartment buildings by creating a welcoming cube design that prioritizes communal spaces with a courtyard which is open to the street. The mixed-use building features 279 m 2 (3,000 sf) of retail space and dedicates 12 units for low-income tenants.

Energy Efficiency 110

Energy Efficiency Flooring Systems Roofing Systems Building Materials 110

UK Construction Blog

APRIL 25, 2024

The post Unconventional Charm: A Practical Guide to Non Standard Construction Homes appeared first on UK Construction Blog. What is non standard construction and why does it matter for homeowners and buyers? Common Non-Standard Construction Methods Discussing non-standard construction methods brings to mind a few popular types.

Building Standards 62

Building Standards Steel Fabrication Structural Systems Roofing Systems 62

UK Construction Blog

APRIL 23, 2024

The post Eco-Friendly Building Ideas: Innovative Designs for Sustainable Living appeared first on UK Construction Blog. Eco-friendly building ideas are pivotal for this shift, focusing on reducing carbon footprints and improving energy efficiency in homes and commercial structures.

Building Design 62

Building Design Renewable Energy Systems Sustainability Energy Conservation 62

BDC Network

JANUARY 2, 2024

rcassidy Tue, 01/02/2024 - 14:16 John Sullivan, AIA A new study by a collaboration of design, engineering, and construction firms describes cost-effective strategies for building laboratories and science+technology facilities using mass timber. Here are five reasons why.

Flooring Systems 113

Flooring Systems Structural Systems Building Standards Building Codes 113

CCR Magazine

AUGUST 7, 2024

To address these issues, key weatherproofing strategies include: Applying a High-Quality Finish A recent SpringerLink study highlighted the harmful effects of solar UV radiation on construction materials, including wood. Department of Energy highlights that log walls often fall short of typical energy standards.

Energy Efficiency 59

Energy Efficiency Wall Systems Painting/finishing Roofing Systems 59

Construction Marketing

JANUARY 24, 2024

Mechanical and electrical engineers work on systems within buildings, such as heating, ventilation and air conditioning (HVAC) and electrical systems. Estimators Analyze project blueprints and specifications to estimate labor, materials, and equipment costs. Ensure compliance with electrical codes and safety standards.

HVAC System Installation 126

HVAC System Installation Electrical Systems Building Code Compliance Structural Systems 126

Civil + Structural Engineer

APRIL 20, 2023

BRONX, NY— Located in New York City’s South Bronx neighborhood of Mott Haven, the newly dedicated $175 million 425 Grand Concourse high-rise building serves as the largest Passive House project to date in North America. A principal tenet of Passive House design entails siting the building to optimize sun/heat exposure.

Concrete Pouring 130

Concrete Pouring Energy Efficiency Flooring Systems Structural Systems 130

CCR Magazine

AUGUST 28, 2024

Building your own home can be one of the most rewarding and significant investments of your life. However, it’s also a complex process that requires careful planning, budgeting, and a clear understanding of the building process. Here’s everything you need to know to make your home-building journey a success.

HVAC System Installation 52

HVAC System Installation Electrical Wiring Installation Plumbing Systems Building Permits 52

Construction Specifier

DECEMBER 21, 2020

Prefabricated wall panels are individually manufactured in an offsite fabrication shop, complete with exterior cladding and fenestration, anchor system, water/air/vapor barrier(s) and flashing, insulation , and the structural framing. Building and site considerations. Donlon, PE. They are then lifted and installed onsite.

Prefabrication 98

Prefabrication Wall Systems Building Materials Manufacturing Structural Systems 98

CCR Magazine

FEBRUARY 13, 2024

Elevate Commercial Roofing Systems & Lining has named Frank Palmer as Senior Vice President of Sales. Palmer’s background includes leadership and sales roles with Advanced Foam Plastics, Carlisle Construction Materials, specifically the Versico and Carlisle Syntec brands, and SRS Distribution. Visit HolcimBE.com to learn more.

Roofing Systems 52

Roofing Systems Wall Systems Waterproofing Systems Building Products Distribution 52

UK Construction Blog

JUNE 13, 2023

As the popularity of timber frame construction continues to rise in the UK, understanding the intricacies of timber frame external wall construction details UK becomes increasingly important. Short Summary Understand the theory of timber frame external wall construction, including studs and sheathing, ventilation membranes and cladding.

Fire Protection System Installation 52

Fire Protection System Installation Wall Systems Fire Protection Systems Structural Systems 52

Construction Specifier

MARCH 3, 2023

Photo © Stéphane Brügger By Alexandre Bélisle Insulated metal panels (IMPs) are gaining popularity in the construction industry as an innovative and turnkey solution for building envelopes. Designing with IMPs gives project owners, architects, and contractors a competitive edge in today’s design-build market.

Fire Protection Systems 52

Fire Protection Systems Wall Systems Structural Systems Building Materials Manufacturing 52

CCR Magazine

MAY 29, 2024

Elevated Foundations An effective way to protect buildings from floods is by elevating the foundation above the flood level. Stem wall foundations: These are raised concrete walls that support the structure above the flood level. These materials are often used for structural components like walls and floors.

Foundation Systems 52

Foundation Systems Building Resilience Building Materials Building Codes 52

CCR Magazine

JUNE 13, 2024

Green Building Practices Sustainability continues to be at the forefront of commercial construction , with an increased focus on eco-friendly building materials, energy-efficient systems, and sustainable designs. Modular construction is particularly advantageous in urban settings where space and time are limited.

Building Information Modeling (BIM) 52

Building Information Modeling (BIM) Building Materials Manufacturing Energy Efficiency Building Automation 52

BDC Network

APRIL 18, 2024

The next destination: Passive design airports 0 qpurcell Thu, 04/18/2024 - 13:59 Airports Today, we can design airports that are climate resilient, durable, long-lasting, and healthy for occupants—we can design airports using Passive House standards. New airports often mandate the use of local materials to reduce their carbon footprint.

Renewable Energy Systems 59

Renewable Energy Systems Energy Efficiency Building Materials Manufacturing Wall Systems 59