CCR Magazine

MAY 20, 2024

The type of plan that shows the layout of the HVAC system is called a mechanical plan. Mechanical plans detail the equipment and its placement within the building, including all components necessary for heating, ventilation, and air conditioning. HVAC systems regulate a building’s temperature, humidity, and air quality.

HVAC Systems 59

HVAC Systems HVAC System Installation Energy Efficiency Zoning 59

CCR Magazine

JUNE 4, 2024

Not only are clients increasingly conscientious, but building codes and governmental standards are raising the bar for what qualifies as “green” construction. With this in mind, comprehensive air barrier systems are becoming the new norm for creating sustainable, high-performing commercial buildings.

HVAC System Installation 52

HVAC System Installation HVAC Systems Wall Systems Structural Systems 52

Civil + Structural Engineer

NOVEMBER 1, 2023

By Shannon Humbert, Legacy Building Solutions Rigid-frame fabric buildings offer a permanent solution for athletic facilities. For many entities, both public and private, the need for an athletics and recreation facility comes down to two options: A permanent brick and mortar building, or a lower-cost fabric bubble.

Steel Fabrication 130

Steel Fabrication HVAC System Installation Structural Systems Fire Protection System Installation 130

CCR Magazine

NOVEMBER 7, 2024

In this guide, we will delve into the critical aspects of choosing the right air conditioning unit, assessing your home’s layout for optimal cooling, understanding installation options, planning for electrical requirements, and navigating local regulations.

Electrical Wiring Installation 52

Electrical Wiring Installation HVAC System Installation Fire Protection System Installation Energy Efficiency 52

CCR Magazine

OCTOBER 16, 2024

The choice of blinds can also affect building energy efficiency ratings, which is an increasingly important factor in modern construction. Modern blind options can help bring older buildings up to current energy standards, while also enhancing the overall aesthetic. </p>

Building Code Compliance 52

Building Code Compliance Energy Efficiency HVAC System Installation Building Codes 52

CCR Magazine

JULY 11, 2024

The Thermafit Model MAS helps give contractors and engineers the option to eliminate or reduce the need for traditional, fossil fuel boilers and owners new solutions to decarbonize buildings through the electrification of heating. It responds to varying building loads throughout the day and year, resulting in performance that is 8.2

HVAC System Installation 52

HVAC System Installation Piping Installation HVAC Systems Building Controls 52

Construction Marketing

JANUARY 24, 2024

Mechanical and electrical engineers work on systems within buildings, such as heating, ventilation and air conditioning (HVAC) and electrical systems. Electricians Install, maintain, and repair electrical systems in buildings and construction sites. Ensure equipment is maintained and used safely.

HVAC System Installation 125

HVAC System Installation Electrical Systems Building Code Compliance Structural Systems 125

CCR Magazine

FEBRUARY 20, 2024

Well-designed metal ductwork is crucial for managing airflow and maintaining good indoor air quality in modern buildings. However, the intricate planning and execution of duct systems requires in-depth mechanical engineering knowledge and adherence to strict HVAC codes and standards.

HVAC System Installation 52

HVAC System Installation HVAC Systems Steel Fabrication Energy Efficiency 52

CCR Magazine

SEPTEMBER 10, 2024

Office access control systems enhance security and efficiency in modern offices. They streamline visitor management, optimize space usage, reduce human error, and support flexible working hours. These systems also improve emergency response, making them essential for any office.

HVAC System Installation 52

HVAC System Installation Building Automation Building Controls Risk Management 52

Construction Specifier

SEPTEMBER 18, 2024

Today, several dynamic factors play a significant role: Climate change impacts: Regions are increasingly experiencing extreme heat, and some climate zones now require air conditioning installations where they previously did not. Harsher winter storms and persistent droughts are also becoming more common.

Ceiling Systems 52

Ceiling Systems HVAC System Installation Renewable Energy Systems HVAC Systems 52

CCR Magazine

SEPTEMBER 20, 2024

Johnson Controls , the global leader for smart, healthy and sustainable buildings, today launched a highly anticipated update to the company’s industry-leading Building Automation System (BAS), Metasys, which serves the needs of commercial, industrial and institutional buildings, regardless of industry. Metasys 14.0

Building Automation 52

Building Automation Building Controls HVAC System Installation HVAC Systems 52

CCR Magazine

MARCH 25, 2024

Trane – by Trane Technologies (NYSE: TT), a global climate innovator, has introduced new innovations to provide outdoor heat pump technology to multi-zoned buildings, optimize indoor environments, and empower customers to start their transition to next-generation refrigerants. Mitsubishi Electric Trane HVAC U.S.

HVAC System Installation 52

HVAC System Installation Renewable Energy Systems HVAC Systems Energy Efficiency 52

CCR Magazine

MARCH 25, 2024

The innovative new service proactively tracks and manages pump performance and provides early diagnostic warnings and timely automated reports that help customers make informed decisions and take immediate action to deliver the most efficient and safest fire safety system performance.

Fire Protection System Installation 52

Fire Protection System Installation Fire Protection Systems HVAC System Installation Safety Regulations 52

CCR Magazine

OCTOBER 8, 2024

Renovation is a crucial component of owning and operating a commercial building. The structure must be regularly updated to ensure optimal functionality, safety, aesthetics, and compliance with contemporary codes. By using the sun to illuminate the building, it can greatly limit reliance on artificial lighting sources.

Energy Efficiency 52

Energy Efficiency Building Code Compliance Flooring Systems HVAC System Installation 52

Roads Online

JUNE 20, 2024

Image/Coates From maintaining thermal comfort and personal safety, to enabling manufacturing, building and industrial processes, many businesses rely on temperature-controlled environments. This is where heating systems can be used as a safety line to meet production deadlines.”

HVAC System Installation 98

HVAC System Installation Electrical Systems Controls Manufacturing Cost Control 98

CCR Magazine

JULY 30, 2024

The Rise of Sustainable Construction Emphasis on Green Building Practices Sustainability has become a central focus in commercial construction. Industry experts highlight the growing demand for green building practices that minimize environmental impact and promote energy efficiency.

Building Information Modeling (BIM) 52

Building Information Modeling (BIM) Renewable Energy Systems HVAC System Installation Energy Efficiency 52

CCR Magazine

JUNE 26, 2024

Whether you’re updating an old office building, revamping retail space, or converting a warehouse into modern offices, the ultimate goal is clear: maximize the property’s value. It’s also crucial to comply with building codes, zoning laws, and accessibility standards.

Building Information Modeling (BIM) 52

Building Information Modeling (BIM) Environmental Impact Assessment Property Management Energy Efficiency 52

UK Construction Blog

FEBRUARY 13, 2024

A facility manager within a company possesses a comprehensive understanding of the intricacies involved in maintaining their building and operations. However, the role of a facilities management company extends far beyond mere building repairs and equipment maintenance.

Facility Management 62

Facility Management Construction Management HVAC System Installation Cost Control 62

CCR Magazine

NOVEMBER 14, 2024

A heating system is a mechanism used to warm rooms, offices, or other residential or commercial spaces. There are different types of heating systems, and they use various types of fuels. Heating systems are a crucial part of an HVAC system. This guide covers different types of home heating systems.

Electrical Systems 52

Electrical Systems HVAC System Installation Flooring Systems Energy Efficiency 52

CCR Magazine

JULY 12, 2023

Collaborate with an architect or designer experienced in container conversions to optimize the design for functionality and aesthetics. Incorporate your lifestyle needs, desired features, and any local building regulations into the design process to ensure a successful project.

HVAC System Installation 52

HVAC System Installation Sustainability HVAC Systems Plumbing Systems 52

UK Construction Blog

MARCH 20, 2024

To succeed in the world of plumbing, heating, ventilation and air conditioning (HVAC) operations, fleet businesses have to be clear cut in their goals. There’s a little more to this than just fixing pipes or doing a great installation job. These standards serve not only to enhance competitive edge, but also longer-term success.

Plumbing 52

Plumbing Plumbing Systems HVAC System Installation HVAC Systems 52

BDC Network

MARCH 29, 2024

Demystifying carbon offsets vs direct reductions 0 qpurcell Fri, 03/29/2024 - 11:18 Sustainability Chris Forney, Principal, Brightworks Sustainability, and Rob Atkinson, Senior Project Manager, IA Interior Architects, share the misconceptions about carbon offsets and identify opportunities for realizing a carbon-neutral building portfolio.

Energy Efficiency 111

Energy Efficiency Environmental Impact Assessment HVAC System Installation Building Standards 111

Construction Specifier

SEPTEMBER 5, 2024

Even when people are inside, it is hard to block out intruding and distracting noises within the space people are in; noise coming from adjacent rooms, areas above or below, or from hallways; or even from outside the building. The purpose of the building determines what types of noise pollution creates “pain points” for occupants.

Building Performance Measurement 64

Building Performance Measurement Ceiling Systems Project Management Consulting Flooring Systems 64

Stok

FEBRUARY 23, 2019

With the recently launched International Living Future Institute (ILFI) Zero Carbon Certification (ZCC) – the first third-party certified Zero Carbon global standard – achieving and verifying Net Zero Carbon performance is now within reach. The identified issues are then corrected to achieve the optimized design performance.

Renewable Energy Systems 67

Renewable Energy Systems HVAC System Installation Building Performance Measurement HVAC Systems 67

BDC Network

JUNE 16, 2023

In a standard generation system, the waste heat from producing electricity is released into the atmosphere. A CHP system captures and converts the exhaust to produce even more energy in the form of heating, cooling, or hot water. Specifically, a cogeneration system’s carbon dioxide emission factor is 48.9%

Renewable Energy Systems 52

Renewable Energy Systems Sustainability HVAC System Installation Electrical Systems 52

CivilJungle

JUNE 1, 2022

Also, Read: What Is Skillion Roof | Types of Skillion Roof | Uses of Skillion Roof | How to Build a Skillion Roof. The acquisition of interlayers, such as manufacturer buildings to office buildings, needs several extra layers inside the plant. Methods of Retrofitting Building. Retrofitting of the Structural System.

HVAC System Installation 52

HVAC System Installation Fire Protection System Installation Energy Efficiency Structural Systems 52

Autodesk Construction Cloud

JANUARY 17, 2022

How to Increase Building Performance and Meet LEED Requirements. Project commissioning, also referred to as Cx, is a series of milestones that includes the testing of systems, materials, and staff who will be operating the systems. In construction, commissioning is the process of evaluating a building to be ready for service.

Building Commissioning 84

Building Commissioning Handover Building Information Modeling (BIM) Renewable Energy Systems 84

CCR Magazine

JANUARY 15, 2024

Home automation, the process of automating various household functions through advanced technology integration, is becoming standard in new builds. To understand the value of smart home systems, it helps first to define what constitutes a “smart home” and explore some background around the acceleration of home automation.

Building Automation 52

Building Automation HVAC System Installation Energy Efficiency HVAC Systems 52

UK Construction Blog

JANUARY 29, 2024

The increasing awareness of environmental impacts caused by consumption has heightened interest in sustainability and green practices, particularly in the building and construction industry. Such designs reduce the building’s carbon footprint and ensure efficient energy use, setting a standard for future construction projects to follow.

Renewable Energy Systems 62

Renewable Energy Systems Energy Efficiency Green Building Building Materials Manufacturing 62

Stok

OCTOBER 21, 2020

With their strict technical requirements and rigorous performance standards, laboratories and other high-tech life science facilities present a unique opportunity for sustainable design and construction innovation. If the space can’t perform to exact requirements, the tenant can’t use it and the schedule is delayed.

Building Design 52

Building Design Building Performance Measurement HVAC System Installation Energy Efficiency 52

Stok

OCTOBER 22, 2020

With their strict technical requirements and rigorous performance standards, laboratories and other high-tech life science facilities present a unique opportunity for sustainable design and construction innovation. If the space can’t perform to exact requirements, the tenant can’t use it and the schedule is delayed.

Building Design 52

Building Design Building Performance Measurement HVAC System Installation Energy Efficiency 52

Stok

AUGUST 28, 2019

Due to their embodied carbon and operational carbon footprints, buildings play a significant role in these efforts, so understanding the impact of legislation on buildings is critical. This directly translates to building energy codes. For example, LEED v4 refers to ASHRAE standard 90.1-2010 How to approach compliance.

Building Code Compliance 70

Building Code Compliance Building Codes Renewable Energy Systems Energy Efficiency 70

The Korte Company

FEBRUARY 28, 2019

Not surprisingly, the price tag to build a warehouse has a major impact on how its floorplan is designed. If cost wasn’t an issue, owners could build the perfect warehouse with every bell and whistle available to overcome any challenge. Racking systems play an outsized role when owners plan warehouse layout.

Building Products Distribution 75

Building Products Distribution Fire Protection System Installation HVAC System Installation Fire Protection Systems 75

Autodesk Construction Cloud

JUNE 27, 2023

These conflicts, or “clashes,” arise when different design components, such as structural elements, HVAC systems, or electrical conduits, intersect or interfere with the buffer zone of another object. This could hinder routine maintenance and lead to extended downtimes, affecting the building’s comfort and efficiency.

Building Information Modeling (BIM) 52

Building Information Modeling (BIM) Schedule Management Electrical Wiring Installation Collaboration 52

CCR Magazine

JULY 5, 2023

The conversion should adhere to building regulations and be performed professionally to ensure safety and longevity. Generally, homes with top-tier roofing attract higher sales prices compared to similar properties with standard roofing. The result? Your property becomes more desirable, fetching higher offers on the market.

Energy Efficiency 52

Energy Efficiency Roofing Systems Flooring Systems HVAC System Installation 52

Autodesk Construction Cloud

NOVEMBER 1, 2022

Danielle O’Connell, Skanska USA Building Inc. Chris Walker, The PENTA Building Group. As Mechanical Engineer & Project Manager, Jason oversees the implementation of digital platforms in a multi-building and multi-phase project. Maggie Farrell, S. Wilson & Co. Aubrey Ginn, Shapiro & Duncan, Inc. Mohammad S.

Building Information Modeling (BIM) 122

Building Information Modeling (BIM) Project Management Consulting Project Management Construction Management 122

Job Order Contracting

SEPTEMBER 12, 2018

Application: This standard card applies to automatic hydraulic security Bollards/Barricades found at driveway entrances, and other areas where vehicular traffic must be controlled. Review the Standard Operating Procedure for “Controlling Hazardous Energy Sources”. Standard Tools – Basic. Standard Tools-Basic 2.

Maintenance 40

Maintenance Fire Protection System Installation Fire Protection Systems Electrical Wiring Installation 40