CCR Magazine

JULY 12, 2023

Collaborate with an architect or designer experienced in container conversions to optimize the design for functionality and aesthetics. Incorporate your lifestyle needs, desired features, and any local building regulations into the design process to ensure a successful project.

HVAC System Installation 52

HVAC System Installation Sustainability HVAC Systems Plumbing Systems 52

CCR Magazine

APRIL 26, 2024

Renovating a basement bathroom involves a series of well-defined steps that ensure both functionality and compliance with local building codes. Initially, homeowners must assess the feasibility of the project, focusing on the existing layout, plumbing, and structural requirements.

Waterproofing Systems 52

Waterproofing Systems Building Code Compliance HVAC System Installation Ceiling Systems 52

Stok

APRIL 25, 2023

M&V, MBCx, WTF: Building Performance Monitoring as a Means to Achieve Decarbonization Goals This blog post was co-authored by Stok’s Ally Duncan and Jessica Shaw , summarizing their presentation at AEE West 2023. However, because of how the M&V credit has evolved from LEED version 2.0

Building Performance Measurement 98

Building Performance Measurement HVAC System Installation Electrical Systems Energy Efficiency 98

Stok

APRIL 25, 2023

As building owners and occupiers adopt zero commitments and find their properties subject to energy performance and emissions regulations, the question becomes, ‘how can we achieve these ambitious reduction targets?’ This approach avoids unnecessarily analyzing all the detailed system data and only focuses on the data with anomalies.

Building Performance Measurement 98

Building Performance Measurement HVAC System Installation Electrical Systems Energy Efficiency 98

PN - Project Management

MAY 16, 2022

Commercial buildings account for a large percentage of the overall carbon emissions in the world. Due to this alarming statistic, building or retrofitting structures in line with green initiatives and transitioning to a sustainable building method are logical solutions to reduce C02 emissions.

Green Building 52

Green Building Building Design HVAC System Installation Renewable Energy Systems 52

West Shore Construction

JANUARY 17, 2023

If you want to get the most out of your renovation, USA Today suggests considering the following improvements : Replace the tub Install natural stone kitchen countertops Replace siding and garage doors You Need a Place to Store Your Stuff Before contractors can start demolition, you need to clear out the room.

Electrical Wiring Installation 52

Electrical Wiring Installation Fire Protection System Installation HVAC System Installation Warranty 52

Autodesk Construction Cloud

JANUARY 17, 2022

How to Increase Building Performance and Meet LEED Requirements. Project commissioning, also referred to as Cx, is a series of milestones that includes the testing of systems, materials, and staff who will be operating the systems. In construction, commissioning is the process of evaluating a building to be ready for service.

Building Commissioning 84

Building Commissioning Handover Renewable Energy Systems Building Information Modeling (BIM) 84

UK Construction Blog

SEPTEMBER 6, 2023

Key Takeaways VR technology is revolutionizing the construction industry by optimizing efficiency, improving collaboration and reducing costs. For example, augmented reality headsets can be used to overlay virtual plans onto the physical space, facilitating accurate installation and placement of components and reducing the need for rework.

Building Information Modeling (BIM) 62

Building Information Modeling (BIM) Real Estate Development Cost Control Collaboration 62

CCR Magazine

JULY 5, 2023

The conversion should adhere to building regulations and be performed professionally to ensure safety and longevity. For homeowners in Atlanta seeking to optimize this aspect, Dr. Roof Inc home roofing company has become the go-to choice. The result? Your property becomes more desirable, fetching higher offers on the market.

Energy Efficiency 52

Energy Efficiency Roofing Systems Flooring Systems HVAC System Installation 52

CCR Magazine

SEPTEMBER 14, 2024

Design Envelope Tango is a compact solution that reduces installation costs. Because the two rotating devices share a single casing, installation requires less piping. In addition, the Vertical In-Line orientation means the pump is installed in the piping and does not require an inertia base.

HVAC System Installation 52

HVAC System Installation Fire Protection System Installation HVAC Systems Piping Installation 52

Civil + Structural Engineer

JANUARY 8, 2024

– Ware Malcomb , an award-winning international design firm, today announced that construction is complete on 20430 & 20440 Century Boulevard, two office buildings converted to a cGMP-ready white box facility and state-of-the-art lab facility respectively, located in Rock Creek’s four-building Precision Labs campus in Germantown, MD.

HVAC System Installation 130

HVAC System Installation Energy Efficiency Real Estate Development Electrical Systems 130

CivilJungle

APRIL 20, 2022

Drywall is basically a gypsum board which is installed on the interior wall of the house. The installation process of drywall is almost the same as other interior objects. It is done to create the whole fireproofing system. Those boards are fixed with building structures with nails, screws or some adhesives. Average Cost.

Painting/finishing 52

Painting/finishing Ceiling Systems HVAC System Installation Piping Installation 52

ENR Construction

JULY 22, 2012

Building Types. McKinstry continues to pursue its traditional HVAC work. Here, team members install a mechanical unit of the roof of a Seattle-area data center. The design-build mechanical contractor sums up its services in its motto, "For the Life of Your Building." SUBSCRIBE TODAY & receive immediate web access.

Facility Management 34

Facility Management Building Information Modeling (BIM) Electrical Systems Specialty Contracting 34

Construction Specifier

SEPTEMBER 5, 2024

Even when people are inside, it is hard to block out intruding and distracting noises within the space people are in; noise coming from adjacent rooms, areas above or below, or from hallways; or even from outside the building. The purpose of the building determines what types of noise pollution creates “pain points” for occupants.

Building Performance Measurement 64

Building Performance Measurement Ceiling Systems Project Management Consulting Flooring Systems 64

Job Order Contracting

SEPTEMBER 12, 2018

Clean scale from head(s) after removing and install cover plate. Remove fill tube cap, install spacer pipe and install fill tube. Remove fountain head cover(s) (if applicable) and install fountain head. Application: This standard applies to all installed sprinkler systems with nozzles. Check Points: Fall 1.

Maintenance 40

Maintenance Fire Protection System Installation Fire Protection Systems Electrical Wiring Installation 40

Autodesk Construction Cloud

JUNE 27, 2023

These conflicts, or “clashes,” arise when different design components, such as structural elements, HVAC systems, or electrical conduits, intersect or interfere with the buffer zone of another object. This could hinder routine maintenance and lead to extended downtimes, affecting the building’s comfort and efficiency.

Building Information Modeling (BIM) 52

Building Information Modeling (BIM) Schedule Management Electrical Wiring Installation Collaboration 52

Autodesk Construction Cloud

NOVEMBER 1, 2022

Danielle O’Connell, Skanska USA Building Inc. Chris Walker, The PENTA Building Group. As Mechanical Engineer & Project Manager, Jason oversees the implementation of digital platforms in a multi-building and multi-phase project. Maggie Farrell, S. Wilson & Co. Aubrey Ginn, Shapiro & Duncan, Inc. Mohammad S.

Building Information Modeling (BIM) 122

Building Information Modeling (BIM) Project Management Consulting Project Management Construction Management 122

Revit OpEd

APRIL 14, 2016

Last night I was able to download and install Building Design Suite 2017 from my Autodesk subscription account. In a project it might look this if we create a unique subcategory for Building Edges and Roof Drains. Toposurface edges are now calculated based on the building pads, not the overall toposurface.

Steel Fabrication 75

Steel Fabrication Schedule Management Piping Installation Wall Systems 75

Building Information Management

JUNE 22, 2012

The core competencies identified include competencies relating to building operations and maintenance, energy management, sustainability, water efficiency, safety (including electrical safety) and building performance measures. Fede ral Buildings Personnel Training Act. The core competencies will be updated annually per the law.

Building Performance Measurement 45

Building Performance Measurement Fire Protection System Installation Renewable Energy Systems Fire Protection Systems 45