CCR Magazine

NOVEMBER 9, 2024

With a U-factor rating of 0.532, the Thermiser Max – Low U Door is the most energy efficient rolling door on the market and has been validated by third-party testing using the door industry’s most accurate measure of thermal performance. Historically, the industry focused on R-value as the primary measure of thermal performance.

Building Performance Measurement 52

Building Performance Measurement Energy Efficiency Heavy Equipment Manufacturing HVAC Systems 52

iField Smart

SEPTEMBER 29, 2024

Green building certifications offer a valuable framework for assessing and recognizing buildings that meet certain sustainability standards. These certifications provide a standardized framework for measuring and comparing the sustainability of different buildings. Green Building Council (USGBC).

Green Building 73

Green Building Environmental Impact Assessment Energy Conservation Building Performance Measurement 73

Civil + Structural Engineer

NOVEMBER 4, 2024

The new water management standard enforces Mandatory Water Systems Management Plans, Active Automatic Flow Monitoring Shutoff (AAFMS), and coverage for temporary and permanent water systems. Equally, many insurers will require compliance with JCoP guidelines to provide coverage.

Construction Management 130

Construction Management Fire Protection Systems Insurance Management Building Code Compliance 130

UK Construction Blog

AUGUST 1, 2024

The post Key Services Offered by Assent Building Control appeared first on UK Construction Blog. Assent Building Control provides various services to ensure construction projects comply with regulations and run smoothly. Their expertise covers various aspects, from understanding building codes to managing project approvals.

Building Controls 57

Building Controls Fire Protection System Installation Building Code Compliance Safety Regulations 57

The Pro Builder

APRIL 29, 2023

Getting Older Homes Up to Snuff for Energy Efficiency ibush Sat, 04/29/2023 - 08:30 Residential buildings account for about 21% of energy use and 20% of greenhouse gas (GHG) emissions in the U.S. But bringing existing homes up to those standards has been far less consistent and hasn’t been at a scale sufficient to make a significant impact.

Energy Efficiency 246

Energy Efficiency Building Performance Measurement Building Resilience Environmental Consulting 246

Construction News

APRIL 8, 2024

The Chartered Institution of Building Services Engineers has been appointed as the new scheme administrator for NABERS UK – a standard for measuring operational carbon emissions from commercial buildings.

Building Performance Measurement 52

Building Performance Measurement Building Standards Engineering Sustainability 52

Autodesk Construction Cloud

JULY 10, 2023

But buildings under construction have many moving parts and a lot of people put those parts into action. Tim Kelleher , Operational Standards & Innovation Manager at Brinkman Construction , is all about knowing where those parts are. Autodesk Build has been a complete game changer for a lot of our processes.

Building Standards 52

Building Standards Construction Management Building Performance Measurement Project Management 52

CCR Magazine

NOVEMBER 6, 2024

As cities grow and populations increase, the demand for safe and durable buildings rises. Engineering techniques supported by technology are setting new standards for safe, resilient buildings, making it essential for an engineering company to stay at the forefront of these developments.

Building Design 52

Building Design Safety Regulations Building Resilience Building Code Compliance 52

Building Information Management

JUNE 27, 2016

on Building Economics. ACTIVE standards under the jurisdiction of E06.81 . E833-14 Standard Terminology of Building Economics. E917-15 Standard Practice for Measuring Life-Cycle Costs of Buildings and Building Systems. E2166-12 Standard Practice for Organizing and Managing Building Data.

Building Standards 40

Building Standards Building Performance Measurement Structural Systems Facility Management 40

Civil + Structural Engineer

OCTOBER 30, 2023

New Sydney icon wins unprecedented seven awards, demonstrates importance of structure renewal to mitigate climate change Chicago (GLOBE NEWSWIRE) — The Council on Tall Buildings and Urban Habitat (CTBUH) announced the winner of its annual award for best tall building worldwide: Quay Quarter Tower , in Sydney.

Renewable Energy Systems 264

Renewable Energy Systems Green Building Building Performance Measurement Real Estate Development 264

CCR Magazine

NOVEMBER 12, 2024

As they build, it’s crucial for you to pay utmost attention to the plumbing layout and use appropriate materials. Employing preventive measures can save your project from unanticipated disasters in the long run, ensuring trouble-free operation. Error Prevention Measures? Why is Proper Ventilation Vital?

Plumbing 52

Plumbing Plumbing Systems Piping Installation Building Code Compliance 52

Safety Services Company

AUGUST 12, 2024

A safe work environment is a cornerstone of successful projects, ensuring every team member can perform at their best without the looming threat of injury or accident. Cultivating a culture of security and efficiency starts with these safety measures. Ensure that audits are thorough and follow a standardized checklist.

Safety Regulations 111

Safety Regulations Fire Protection Systems Building Performance Measurement Building Products Distribution 111

Civil + Structural Engineer

APRIL 5, 2024

PAE Engineers enjoys a unique symbol of its brand identity – the company’s Portland headquarters office, which is the world’s first developer-driven Living Building. PAE’s Living Building Challenge The PAE Living Building is a five-story, 58,000-square-foot mixed-use building located in a historic neighborhood in Portland.

Engineering 130

Engineering Building Performance Measurement Green Building Real Estate Development 130

The Pro Builder

OCTOBER 25, 2023

The New American Home (TNAH) 2023 not only showcases stunning design and views of the Las Vegas Valley but also serves as a model of high performance in home design, from the home's natural resource efficiencies and renewable energy systems to the healthy, comfortable indoor environment it provides for its owners.

Energy Efficiency 130

Energy Efficiency Renewable Energy Systems HVAC System Installation Sustainability 130

iField Smart

SEPTEMBER 12, 2024

By investing in employee development, construction organizations can foster innovation, improve performance, manage talent and create a sustainable competitive advantage. Regulatory Compliance: Staying updated with evolving regulations and standards is crucial for construction professionals.

Construction Management 52

Construction Management Building Information Modeling (BIM) Building Performance Measurement Construction Equipment 52

CCR Magazine

OCTOBER 11, 2023

Whether for extensive renovation work, property valuation, or facility management purposes, performing an accurate measured building survey is an important part of understanding any real estate asset in London. Coordinating the Site Survey The first step in a measured building survey is careful planning and coordination.

Surveying 52

Surveying Building Performance Measurement Quality Assurance Building Information Modeling (BIM) 52

Construction Specifier

APRIL 30, 2021

Preventing noise from transmitting between enclosed rooms is important in buildings. For example, students being energetic in their classroom on an upper floor of a school building should not disturb peers concentrating in the library below them. Requirements in building standards. Images courtesy Rockfon.

Ceiling Systems 98

Ceiling Systems Building Performance Measurement Flooring Systems Building Standards 98

CCR Magazine

OCTOBER 24, 2024

Everything is now shopped online, and shopping for building materials has dramatically changed due to internet technology. Wider Selection The various online building supply retailers provide a vastly wider array of products than your local store. Even more free shipping also by most of the retail stores also.

Building Materials 52

Building Materials Building Performance Measurement Roofing Systems Building Automation 52

Construction Specifier

SEPTEMBER 4, 2024

By Chris Bennett, iSCS, CDT, James Longo, iSCS, and Keith Robinson, RSW, FCSC, FCSI, LEED AP RSW, FCSC, FCSI Photo by Magda Biernat Photography Concrete floors are used in wide-ranging facilities, such as industrial data centers, commercial high-rise buildings, and residential homes.

Building Performance Measurement 59

Building Performance Measurement Curing Concrete Pouring Flooring Systems 59

CCR Magazine

OCTOBER 16, 2024

Key Takeaways Certifications ensure compliance with safety standards. Proper installation techniques are crucial for performance. Certification Standards For TC Bolts Overview Of Relevant Certifications Certification for torque-controlled (TC) bolts is crucial to ensure their reliability and safety in construction.

Building Materials Manufacturing 52

Building Materials Manufacturing Building Code Compliance Controls Manufacturing Quality Control 52

The Pro Builder

SEPTEMBER 10, 2023

But while the efficiency of heating, ventilation, and air conditioning (HVAC) equipment has improved across the board, improper installation or commissioning can result in HVAC system faults that compromise HVAC performance and reduce energy efficiency. Department of Energy's (DOE) Building America program , points out.

HVAC Systems 130

HVAC Systems HVAC System Installation Renewable Energy Systems Energy Efficiency 130

Construction Specifier

JUNE 14, 2024

Many buildings, particularly those located near airports, freeways, and construction zones, struggle with undesirable acoustics. These characteristics raised the thermal and acoustical performance of the windows providing a quieter and more comfortable environment for their guests. Photo by Abstract Photography Inc./courtesy

Building Performance Measurement 59

Building Performance Measurement Building Controls Quality Control Wall Systems 59

Building Radar

JULY 15, 2024

Exploring Global Safety Standards The construction industry is inherently hazardous, with risks ranging from falls and equipment accidents to exposure to harmful materials. This article explores which country boasts the safest construction industry and delves into global safety standards and practices that contribute to this achievement.

Safety Regulations 52

Safety Regulations Building Standards Health Regulations Building Performance Measurement 52

Building Radar

SEPTEMBER 11, 2024

The SOW details what work will be performed, the expected outcomes, and the standards to be met, providing a clear roadmap for project execution. Detailed Description: A thorough explanation of the work to be performed. Acceptance Criteria: Standards that must be met for deliverables to be accepted.

Building Performance Measurement 52

Building Performance Measurement Project Management Schedule Management Building Standards 52

UK Construction Blog

DECEMBER 23, 2023

The post The Crucial Role of Fire Risk Assessments and Fire Door Inspections in Building Safety appeared first on UK Construction Blog. Fire safety within buildings is a critical concern that demands meticulous attention and proactive measures.

Fire Protection System Installation 62

Fire Protection System Installation Inspection Fire Protection Systems Building Performance Measurement 62

Construction Specifier

NOVEMBER 30, 2021

The need to decrease indoor noise levels and improve auditory comfort, speech intelligibility, and sound privacy by specifying high-performing, sound-absorbing surfaces or objects is well-established in building standards, guidelines, and rating systems. Standards and guidelines.

Ceiling Systems 98

Ceiling Systems Building Performance Measurement Building Standards Building Materials Manufacturing 98

Autodesk Construction Cloud

JANUARY 17, 2024

Decision 1: How to improve asset and portfolio performance Whether you're managing one or 50 facilities, actively monitoring and improving performance is critical to long-term profitability. Let's look at the ways you can improve asset and portfolio performance.

Building Information Modeling (BIM) 122

Building Information Modeling (BIM) Building Performance Measurement Facility Management Handover 122

Construction Specifier

SEPTEMBER 26, 2023

It also advances community sustainability through new water conservation measures, while assuring building accessibility through the integration of the updated ICC A117.1 Accessibility Standard , making the IPC the most comprehensive plumbing code available. Standards added for chemical waste piping and fitting materials.

Plumbing Systems 111

Plumbing Systems Building Codes Plumbing Building Performance Measurement 111

Granger Construction

MARCH 8, 2024

Her impressive performance in seamlessly implementing detailed work management practices, orchestrating nearly 1,000 individuals and adhering to strict quality control measures resulted in high praises from clients and partners alike.

Building Performance Measurement 98

Building Performance Measurement Facility Management Schedule Management Project Management 98

Civil + Structural Engineer

OCTOBER 22, 2024

The partnership builds on Bentley’s recent acquisition of Cesium , the foundational open platform for creating powerful 3D geospatial applications. Cesium is the creator of the 3D Tiles open standard also used by Google. Bentley Asset Analytics Open data and AI can come together to enhance asset performance.

Engineering 203

Engineering Infrastructure Development Foundation Systems Building Resilience 203

Construction Specifier

SEPTEMBER 5, 2024

Even when people are inside, it is hard to block out intruding and distracting noises within the space people are in; noise coming from adjacent rooms, areas above or below, or from hallways; or even from outside the building. The purpose of the building determines what types of noise pollution creates “pain points” for occupants.

Building Performance Measurement 64

Building Performance Measurement Ceiling Systems Project Management Consulting Flooring Systems 64

BD+C

APRIL 4, 2014

The newly revised ANSI/ASHRAE Standard 105-2014, Standard Methods of Determining, Expressing, and Comparing Building Energy Performance and Greenhouse Gas Emissions , is intended to provide consistency in reporting the energy performance of existing or proposed buildings. Standards Codes and Standards'

Building Standards 58

Building Standards Building Performance Measurement Building Codes 58

Building Radar

OCTOBER 21, 2024

According to Construction Owners , manufacturers must stay updated on various regulatory standards to thrive in a constantly evolving market. Additionally, companies can leverage tools like Building Radar to identify regulatory requirements relevant to their projects, ensuring they meet compliance standards efficiently.

Heavy Equipment Manufacturing 52

Heavy Equipment Manufacturing Safety Regulations Risk Management Building Standards 52

BDC Network

JULY 17, 2023

Jacob D’Albora, Director of Digital Building Operations Augmented Reality Big Data BIM and Information Technology In the fast-paced world of digital transformation, organizations from all industries are embracing innovative technologies to revolutionize their operations. Key Results: Develop and implement data standardization guidelines.

Building Information Modeling (BIM) 98

Building Information Modeling (BIM) Handover Building Optimization Building Performance Measurement 98

UK Construction Blog

MARCH 21, 2024

A poorly performing loft hatch can negate the benefits of a well-insulated loft, leading to heat loss and increased energy costs. Compliance with Part L Building Regulations 3. Understanding U-Value Performance 4. Understanding U-Values U-values measure the heat transfer rate through a material such as a loft hatch.

Energy Efficiency 67

Energy Efficiency Energy Conservation Building Performance Measurement Building Standards 67

BD+C

MARCH 31, 2023

Voice of the Brand When hurricanes, tornados, extreme temperatures, snow and ice, or salty ocean air have the potential to impact a structure, it is critical to design a building envelope system that will protect the occupants from the elements and deliver a comfortable environment.

Zoning 105

Zoning Fire Protection System Installation Fire Protection Systems Building Performance Measurement 105

Construction Specifier

NOVEMBER 20, 2020

When the project team decided to go green during construction, high-performance coatings might not be the first thing on their minds, but maybe they should be. Every high-performance coating system is designed to guard surfaces against corrosion and ultraviolet (UV) light degradation, ultimately extending the life cycle of a building.

Sustainability 107

Sustainability Building Materials Manufacturing Building Performance Measurement Green Building 107