BD+C

MARCH 31, 2023

Steven Huck, District Sales Manager at CENTRIA Why Choose an IMP in an Extreme Weather Zone? In selecting a building envelope system, designers and architects need to weigh a variety of considerations. Thermal performance The industry standard for thermal performance remains the R value.

Zoning 105

Zoning Fire Protection System Installation Fire Protection Systems Building Performance Measurement 105

Construction Specifier

SEPTEMBER 5, 2024

Even when people are inside, it is hard to block out intruding and distracting noises within the space people are in; noise coming from adjacent rooms, areas above or below, or from hallways; or even from outside the building. The purpose of the building determines what types of noise pollution creates “pain points” for occupants.

Building Performance Measurement 64

Building Performance Measurement Ceiling Systems Project Management Consulting Flooring Systems 64

CCR Magazine

NOVEMBER 17, 2023

Many property owners are boosting their bottom line by hosting vacation and long-term rentals. Use mold-resistant building materials like wallboard, paint primer and porcelain. When we test or treat a property for mold contamination , we comply with applicable government and health department standards and certifications.

Property Management 98

Property Management Inspection Building Performance Measurement Risk Management 98

Job Order Contracting

JANUARY 13, 2023

Technology Won’t Help Construction’s and Facilities Management’s Legacy of WASTE simply because technology simply automates existing processes. It’s time to map decision-making, and performance to value! Understanding and defining robust workflows and standard operating procedures is the first step.

Facility Management 91

Facility Management Construction Management Building Performance Measurement Building Automation 91

Construction Specifier

JULY 24, 2024

Some gasket systems are “S” labeled, indicating they are tested to UL 1784, Standard for Safety of Air Leakage Tests of Door Assemblies , which is required by many provisions of the International Building Code ( IBC ). To meet the UL 1784 standard, the air leakage rate of the door assembly cannot exceed 0.1

Fire Protection Systems 59

Fire Protection Systems Building Code Compliance Controls Manufacturing Building Materials Manufacturing 59

UK Construction Blog

DECEMBER 23, 2023

The post Benefits of Retro-Commissioning Your Buildings appeared first on UK Construction Blog. You can learn more about the solution here , while in this article we are going to discuss potential benefits of retro-commissioning your buildings. Let’s investigate some major profits you may receive after retro-commissioning a building.

Building Commissioning 62

Building Commissioning Environmental Impact Assessment Energy Efficiency HVAC Systems 62

BDC Network

MARCH 29, 2024

Demystifying carbon offsets vs direct reductions 0 qpurcell Fri, 03/29/2024 - 11:18 Sustainability Chris Forney, Principal, Brightworks Sustainability, and Rob Atkinson, Senior Project Manager, IA Interior Architects, share the misconceptions about carbon offsets and identify opportunities for realizing a carbon-neutral building portfolio.

Energy Efficiency 111

Energy Efficiency Environmental Impact Assessment HVAC System Installation Building Standards 111

Construction Specifier

SEPTEMBER 25, 2020

The importance of moisture management cannot be overstated. Water intrusion comes with the potential for moisture-related issues like mold and rot in the building envelope. Moisture management strategies impact all stakeholders in the design and building process. Role of WRB in managing moisture. by Bijan Mansouri.

Building Performance Measurement 76

Building Performance Measurement Wall Systems Building Materials Material Handling 76

CCR Magazine

JUNE 12, 2024

Commercial building renovations are pivotal in maintaining and enhancing the functionality, aesthetics, and value of properties. Whether updating an office building, refurbishing a retail space, or modernizing an industrial facility, the process requires careful planning, skilled execution, and a clear understanding of the goals.

Building Code Compliance 52

Building Code Compliance HVAC System Installation Renewable Energy Systems Environmental Impact Assessment 52

Autodesk Construction Cloud

SEPTEMBER 19, 2023

This month, we have more than 35 product releases across Autodesk Construction Cloud platform and products, including Autodesk Build, Autodesk BIM Collaborate, Autodesk Takeoff, ProEst, BuildingConnected, Assemble, and BIM 360. Notification | Advanced Settings – Personalize Autodesk Build email notifications so teams stay on the same page.

Building Information Modeling (BIM) 122

Building Information Modeling (BIM) Building Products Distribution Property Management Project Management 122

CCR Magazine

APRIL 8, 2024

Security is a paramount concern in multi-family residential properties today. The increasing demand for secure living spaces has prompted property managers and residents to seek multi-family residential security solutions that provide peace of mind.

Property Management 52

Property Management Building Performance Measurement Safety Regulations Risk Management 52

CCR Magazine

OCTOBER 28, 2024

Why Should I Redesign My Commercial Property It is therefore important, before going into the how, to define the why. What do you think are the forces that are compelling you to redesign your commercial property? The redesign also makes it easier to build a new environment that would reflect your brand.

Building Permits 52

Building Permits HVAC Systems Cost Control Quality Control 52

West Shore Construction

SEPTEMBER 23, 2024

With the Atlantic Hurricane Season bringing potential devastation every year, the state has continuously worked to improve its infrastructure, laws, and resources to help homeowners protect their properties and lives. This often left homeowners without the necessary protective measures, increasing their vulnerability during hurricane season.

Insurance Management 98

Insurance Management Roofing Systems Structural Systems Building Code Compliance 98

Building Radar

SEPTEMBER 9, 2024

Whether you’re a construction manager, contractor, architect, or just someone involved in a building project, understanding the terminology is crucial. Sustainable construction refers to building practices that aim to minimize the environmental impact of a project throughout its lifecycle.

General Contracting 52

General Contracting Building Code Compliance Building Materials Manufacturing Project Management 52

CCR Magazine

MARCH 21, 2024

Water waste in commercial buildings is a pressing issue that directly impacts not only utility costs but the environment as well. As industries strive towards sustainability, there are effective measures you can take to ensure your commercial space is part of the solution.

Energy Conservation 52

Energy Conservation Environmental Impact Assessment Facility Management Building Performance Measurement 52

UK Construction Blog

SEPTEMBER 22, 2023

Do you know that reinforced autoclaved aerated concrete (RAAC) has played a significant role in public building construction over the past decades? Get ready to dive into the fascinating realm of lightweight yet strong building materials that have impacted the way public buildings were built.

Safety Regulations 62

Safety Regulations Building Performance Measurement Building Materials Manufacturing Concrete Pouring 62

CCR Magazine

JULY 30, 2024

Ever wondered who’s behind those stunning glass windows and sleek architectural features in modern buildings? Precision and accuracy are necessary when measuring, cutting, and fitting glass. In commercial settings, you’ll work on building facades, storefronts, and curtain walls. That’s the work of a glazier.

Material Handling 52

Material Handling Building Performance Measurement Safety Regulations Health Regulations 52

UK Construction Blog

APRIL 25, 2024

This guide will help you understand how this process adds value to your project by saving costs, adhering to environmental standards, and simplifying the renovation journey. Whether it’s preparing a building for a complete makeover or setting the stage for complete demolition, the soft strip process is instrumental.

Environmental Impact Assessment 62

Environmental Impact Assessment Historic Preservation Safety Regulations Building Performance Measurement 62

Construction Specifier

SEPTEMBER 19, 2024

By Iltaz Alam and Marysusan Couturier Photo ©Chris Boswell/Dreamstime.com Ensuring a building’s durability and energy efficiency hinges on a continuous air barrier throughout the building enclosure. Critical are the tie-ins between different components and materials, which must be properly managed and installed to prevent failures.

Waterproofing Systems 52

Waterproofing Systems Building Materials Manufacturing Roofing Systems Building Materials 52

CCR Magazine

OCTOBER 24, 2024

Many homeowners and property managers face the never-ending battle against pests. The Problem with Pests Pests are more than just a nuisance; they can cause significant damage to your property. In fact, termites cause an estimated $5 billion in property damage each year in the United States alone.

Cost Control 52

Cost Control Property Management Building Controls Environmental Impact Assessment 52

Construction Specifier

JUNE 25, 2024

and Steven Gaynor, MBA Photo courtesy Tenmat New York City recently became the first jurisdiction in the country to reject and rewrite major sections of the International Building Code’s ( IBC ’s) language around fire protection in exterior facades. For decades, buildings have relied on intumescent materials for fire control.

Fire Protection System Installation 59

Fire Protection System Installation Fire Protection Systems Building Code Compliance Building Codes 59

CCR Magazine

JULY 23, 2024

Ever wondered who’s behind the intricate woodwork in your home or the sturdy framework of buildings? Let’s delve into the skills and responsibilities that make carpenters the backbone of any building project. Their tasks range from framing buildings to crafting custom cabinetry. That’s the magic of a carpenter.

Building Performance Measurement 40

Building Performance Measurement Building Code Compliance Building Materials Material Handling 40

Construction Specifier

OCTOBER 1, 2024

Whether creating new architectural expressions or rehabilitating architecturally significant historic buildings, from stick-built to unitized, “off-the-shelf” commodity to custom bespoke systems, utilizing insulating glass units or opaque spandrel panels, simple flat or complex geometry; it seems the sky is the limit with curtain wall design today.

Wall Systems 93

Wall Systems Fire Protection System Installation Project Management Consulting Steel Fabrication 93

CCR Magazine

JULY 31, 2024

Whether you’re building new structures or remodeling old ones, understanding construction law is crucial to keep your projects running smoothly and avoid any legal hiccups. Understanding Construction Contracts Construction contracts are the backbone of any building or renovation project.

Building Code Compliance 52

Building Code Compliance Safety Regulations Building Permits Land Use Regulations 52

CCR Magazine

JUNE 12, 2024

The Role of Construction in Sustainable Development Eco-Friendly Materials: Choosing the right material is a crucial element in the concept of green building. They act both as environmentally friendly solutions and as additions to the construction that will improve the appearance of a building as well as functionality.

Sustainability 52

Sustainability Energy Conservation Renewable Energy Systems Environmental Impact Assessment 52

Job Order Contracting

FEBRUARY 3, 2023

Sustainable Facilities Management will require a fundamental change in mindset. Even though tools and services are readily available to consistently deliver quality, on time and on budget repair, renovation, maintenance, and new build outcomes, real property owners and facilities management professionals have yet to adopt system thinking.

Facility Management 52

Facility Management Integrated Project Delivery (IPD) Sustainability Property Management 52

CCR Magazine

SEPTEMBER 3, 2024

Whether you’re building a new home or looking to replace windows and doors in an existing property, finding the right manufacturer is key. Andersen has state-of-the-art testing facilities and rigid quality control standards to ensure exceptional performance and durability. Pella Corp.

Building Materials Manufacturing 52

Building Materials Manufacturing Building Products Distribution Controls Manufacturing Energy Efficiency 52

Job Order Contracting

AUGUST 20, 2023

To meet their responsibilities as stakeholders of the built environment ( facilities and other built structures ), public sector owners need to have the ability create credible construction cost estimate for ALL repair, renovation, maintenance (FSRM), and new build projects. T The following figure, for example, was produced in 1972.

Estimating 89

Estimating Structural Systems Schedule Management Risk Management 89

Building Information Management

OCTOBER 26, 2015

To meet their responsibilities as stakeholders of the built environment ( facilities and other built structures ), public sector owners need to have the ability to determine the number, total cost, and measure the performance of renovation, repair, maintenance, sustainability, and construction projects.

Property Management 45

Property Management Estimating Construction Management Structural Systems 45

CCR Magazine

JULY 8, 2024

Maintaining the sewer pipes in your commercial property might not be the first thing on your mind, but it’s crucial for protecting your investment. Whether you own office buildings, retail spaces, or industrial properties, ensuring the health of your sewer system can save you from costly repairs down the line.

Inspection 52

Inspection Piping Installation Property Management Structural Systems 52

CCR Magazine

APRIL 23, 2024

Demolishing a building is a complex process that involves careful planning and execution to ensure safety and efficiency. This task requires a meticulous approach to handling various materials, managing debris, and minimizing environmental impact. Specialized teams must be deployed to manage and dispose of these materials safely.

Building Controls 52

Building Controls Environmental Impact Assessment Material Handling Safety Regulations 52

UK Construction Blog

JUNE 13, 2023

Fire safety is of paramount importance in a city like London, where countless lives and properties are at stake. A comprehensive London fire risk assessment and fire safety training are essential steps to ensure the safety of both residential and commercial properties.

Fire Protection System Installation 52

Fire Protection System Installation Fire Protection Systems Safety Regulations Risk Management 52

GCP Applied Technologies

MAY 14, 2018

P2P Initiative can advance further via in-transit concrete management system. One of the National Ready Mixed Concrete Association’s (NRMCA) goals is to advance the industry away from prescriptive specifications into more versatile performance specifications†. These requirements should be clear, achievable, measurable and enforceable.

Building Performance Measurement 60

Building Performance Measurement Property Management Quality Control Facility Management 60

UK Construction Blog

MARCH 5, 2024

Utilising oak frames in construction offers sustainability benefits thanks to oak’s longevity and the eco-friendliness of timber as a building material. The process of building an oak frame extension requires careful consideration of design and structural requirements.

Building Materials 62

Building Materials Safety Regulations Structural Systems Roofing Systems 62

CCR Magazine

JUNE 26, 2024

Understanding Common Insurance Claims General contractors face various risks that could result in insurance claims, the most prevalent of which are property damage, bodily injuries, and professional liability claims. Gaining insight into these common claims and when they may arise is the key to effectively mitigating them.

Insurance Management 40

Insurance Management Risk Management Safety Regulations General Contracting 40

UK Construction Blog

MARCH 5, 2024

The allure of oak frames as a building material lies in its robustness and the natural warmth it adds to any design. Opting for a self-build conservatory kit presents a cost-effective alternative to traditional extensions, providing an alluring addition to a property that increases its value while enhancing the quality of living space.

Safety Regulations 62

Safety Regulations Roofing Systems Building Code Compliance Quality Control 62

CivilJungle

MAY 28, 2021

Construction is the methodology of developing a building or infrastructure. What is Building Construction? Building development is the methodology of addition of structure to property. The overwhelming majority of building construction projects are bijou renovations, like incrporation of a room, or repair of a bathroom.

Building Performance Measurement 52

Building Performance Measurement Building Materials Manufacturing Building Permits Project Management Consulting 52