Construction Specifier

DECEMBER 15, 2024

By Lisa May Photo Robert Casey/courtesy Tubelite With commercial architectural trends favoring expansive glass , curtain wall use is growing in newly constructed buildings. In common usage, curtain wall refers to aluminum-framed systems carrying glass, panels, louvers, or occasionally, granite or marble.

Wall Systems 52

Wall Systems Fire Protection System Installation Flooring Systems Building Performance Measurement 52

The Pro Builder

OCTOBER 25, 2023

The New American Home (TNAH) 2023 not only showcases stunning design and views of the Las Vegas Valley but also serves as a model of high performance in home design, from the home's natural resource efficiencies and renewable energy systems to the healthy, comfortable indoor environment it provides for its owners.

Energy Efficiency 130

Energy Efficiency Renewable Energy Systems HVAC System Installation Sustainability 130

Construction Specifier

NOVEMBER 21, 2023

A high-performance building envelope minimizes thermal bridging, enhancing interior thermal comfort with substantial R values at the roof and walls. The building’s energy use intensity (EUI) is reduced to 23, a 71 percent decrease from the baseline, thanks to efficient building systems and envelope design.

Energy Efficiency 111

Energy Efficiency Sustainability Energy Conservation Roofing Systems 111

Specification Product Update

FEBRUARY 4, 2025

Fire resistant glazing and fire-rated glass door-sets manufactured by Promat UK have been installed to provide assured passive fire protection whilst maintaining high levels of natural light in key communal areas within a major new build-to-rent (BTR) development in South Yorkshire. The larger of the two screens measures approximately 4.2m

Fire Protection System Installation 52

Fire Protection System Installation Fire Protection Systems Building Materials Manufacturing Flooring Systems 52

Construction Specifier

NOVEMBER 6, 2023

The recently opened Perelman Performing Arts Center (PAC NYC) stands as a cultural masterpiece with its unique marble facade enclosing its cube shape. translucent marble slabs sandwiched between glass to create the facade, with 4,896 insulated glass units (IGUs) measuring 1.5 m (5 x 3 ft) and weighing 133 kg (295 lbs) each.

Building Performance Measurement 98

Building Performance Measurement Ceiling Systems Collaboration Site Planning 98

Construction Specifier

SEPTEMBER 5, 2024

Even when people are inside, it is hard to block out intruding and distracting noises within the space people are in; noise coming from adjacent rooms, areas above or below, or from hallways; or even from outside the building. The purpose of the building determines what types of noise pollution creates “pain points” for occupants.

Building Performance Measurement 64

Building Performance Measurement Ceiling Systems Project Management Consulting Flooring Systems 64

Construction Specifier

MAY 23, 2023

California’s office tower (W)rapper is named after its wrapping steel exoskeleton, which provides support to the 16-story building. The building is not significant just for its appearance, but also for its sustainability features. This design allows the building to respond and move safely during seismic events. m (14 ft), 5.18

Flooring Systems 90

Flooring Systems Building Performance Measurement Energy Conservation Structural Systems 90

Construction Specifier

MARCH 20, 2025

By Chuck Knickerbocker Photo Simon Hurst Photography/courtesy Technical Glass Products (TGP) Glazing systems are significant in connecting interior spaces to the outdoors, making them a popular option for todays sleek and modern building facades. Consider aluminumthe historical framing material for curtain walls.

Wall Systems 52

Wall Systems Fire Protection System Installation Steel Fabrication HVAC System Installation 52

Construction Specifier

NOVEMBER 6, 2023

The recently opened Perelman Performing Arts Center (PAC NYC) stands as a cultural masterpiece with its unique marble facade enclosing its cube shape. translucent marble slabs sandwiched between glass to create the facade, with 4,896 insulated glass units (IGUs) measuring 1.5 m (5 x 3 ft) and weighing 133 kg (295 lbs) each.

Building Performance Measurement 91

Building Performance Measurement Ceiling Systems Collaboration Site Planning 91

CCR Magazine

MAY 20, 2024

The type of plan that shows the layout of the HVAC system is called a mechanical plan. Mechanical plans detail the equipment and its placement within the building, including all components necessary for heating, ventilation, and air conditioning. HVAC systems regulate a building’s temperature, humidity, and air quality.

HVAC Systems 59

HVAC Systems HVAC System Installation Energy Efficiency Zoning 59

UK Construction Blog

NOVEMBER 8, 2023

It’s an unassuming hero, quietly tucked between the walls and ceilings, that works tirelessly to curtail energy consumption. It serves as a barrier, resisting the flow of heat through walls, roofs, and floors, thus maintaining a building’s temperature irrespective of external weather conditions.

Energy Efficiency 64

Energy Efficiency Energy Conservation Environmental Impact Assessment Building Products Distribution 64

CivilJungle

APRIL 27, 2023

An entire station is a combination of a digital theodolite, an electronic distance measuring device (EDM) and a microprocessor with a memory unit. When the Digital theodolite has been used with a built-in electronic distance-measuring unit, the birth of this new concept in fully automated surveying started.

Surveying 98

Surveying Building Performance Measurement Mapping Foundation Systems 98

Construction Specifier

JULY 25, 2024

The construction process and various finishing activities, such as pouring concrete, or dry wall finishing, can generate large amounts of moisture. Left unaddressed, this moisture can migrate into various areas of the structure, including into the roofing system, leaving materials wet and deteriorating. A 102-mm (4-in.)-thick

Roofing Systems 59

Roofing Systems Construction Management Concrete Pouring Wall Systems 59

Construction Specifier

SEPTEMBER 1, 2021

While specification and design professionals have long considered the effects of material and product choices on the people within the spaces and buildings they create, the COVID-19 pandemic has underscored the importance of designing healthy spaces. Green Building Council’s LEED v4.1 IEQ and influential standards. fire protection.

Ceiling Systems 52

Ceiling Systems Building Performance Measurement Fire Protection System Installation Building Standards 52

CivilJungle

APRIL 30, 2020

These support walls laterally. Shoring can be utilized when walls bulge out when walls crack due to unequal settlement of foundation and repairs must be carried out to the cracked wall, when an adjacent structure needs pulling down when openings must be newly enlarged or made into a wall. Type of Shoring.

Wall Systems 59

Wall Systems Flooring Systems Structural Systems Foundation Systems 59

Construction Specifier

AUGUST 9, 2022

Meet the most innovative precast floor system in the U.S. When Tindall brought its new precast floor system from Denmark to the U.S. customers were not satisfied with accepting the system’s historical performance and European test results. in 2020, the U.S. What is T-SLAB ® ? UNCC testing. Single-span test.

Flooring Systems 52

Flooring Systems Building Performance Measurement Structural Systems Building Products Distribution 52

CivilJungle

FEBRUARY 5, 2021

The work is separated into various items of work for a thorough calculation, and the amounts from every item are measured out and also an analysis of the estimated expense is developed at reasonable prices. Also, Read: Building Estimation Step by Step In Excel Sheet. Drawings (Plans, Sections, etc.). Specifications. As follows.

Estimating 59

Estimating Building Performance Measurement Wall Systems Building Materials Manufacturing 59

CivilJungle

JUNE 1, 2022

Also, Read: What Is Skillion Roof | Types of Skillion Roof | Uses of Skillion Roof | How to Build a Skillion Roof. The acquisition of interlayers, such as manufacturer buildings to office buildings, needs several extra layers inside the plant. Methods of Retrofitting Building. Retrofitting of the Structural System.

HVAC System Installation 52

HVAC System Installation Fire Protection System Installation Energy Efficiency Structural Systems 52

CCR Magazine

FEBRUARY 17, 2025

Yet, many businesses and property owners underestimate the importance of measured building surveys , often skipping them to cut costs or speed up the project timeline. Below, we explore six major problems that can arise when you skip a measured survey for your office building.

Surveying 40

Surveying Building Performance Measurement Fire Protection System Installation Fire Protection Systems 40

UK Construction Blog

APRIL 25, 2024

Key Takeaways Soft strip demolition is a careful process of removing non-structural elements from buildings, prepping for renovation or demolition while preserving structural integrity and allowing potential reuse of materials. Safety is a cornerstone of any soft strip demolition project.

Environmental Impact Assessment 64

Environmental Impact Assessment Historic Preservation Safety Regulations Building Performance Measurement 64

CivilJungle

MARCH 4, 2022

What Is Estimation of Residential Building? Estimation of a residential building is basically a “ Bottoms Up” or “Prime Cost” which performed an analysis in detail and finally produce a product. Estimation of residential building executes various types of works and their expenses in a chart. This is also measured in kg.

Estimating 52

Estimating Building Performance Measurement Painting/finishing Flooring Systems 52

Construction Specifier

JANUARY 20, 2021

The repercussions of the pandemic will no doubt play out in adaptations to the building enclosure and interior spaces. From interior wall assemblies to open plan and exposed structure designs, architects must consider how materials specified for the interior and enclosure will enhance or detract from the quality of the sound in the space.

Building Performance Measurement 52

Building Performance Measurement Building Materials Piping Installation Building Design 52

Construction Specifier

OCTOBER 30, 2024

Many architectural materials have a place in healthcare design but must meet stringent performance standards before they are deemed appropriate for these demanding environments. Anyone who has spent time in an emergency room can attest to the number of gurneys, carts, and equipment being wheeled around and banged against walls.

Steel Fabrication 59

Steel Fabrication Building Materials Manufacturing Building Materials Fire Protection System Installation 59

UK Construction Blog

FEBRUARY 13, 2025

Wall Cracks: Horizontal cracks in drywall or plaster can signal dangerous foundation movement, often requiring professional evaluation and repair before further damage occurs. Interior Indicators: Water intrusion in basements or crawl spaces, along with ceiling cracks, provides strong evidence that the foundation is under unnecessary stress.

Foundation Systems 52

Foundation Systems Inspection Structural Systems Building Performance Measurement 52

Buildern

MAY 4, 2023

Importance of Construction Terminology Building terms and unique collocations are like the secret sauce that makes communication in the industry smooth and efficient. Think of it like building a sturdy foundation for your knowledge. Get ready to explore the building blocks of construction and the fancy words that come with them!

Fire Protection System Installation 52

Fire Protection System Installation Electrical Wiring Installation HVAC System Installation Heavy Lifting Transportation 52

Construction Specifier

JANUARY 31, 2022

Therefore, it is important to test for radon to ensure the safety of commercial building users, whether managers, workers, customers, or visitors. Guidance and best practices information on the array of methods for detection and means for reducing radon infiltration in buildings is provided by the U.S.

Piping Installation 52

Piping Installation Building Performance Measurement Flooring Systems Structural Systems 52

Revit OpEd

JULY 20, 2012

Improves performance of opening and closing sketch mode in projects with many families. Improves stability and performance when using visualization features like Sky, Exposure, and Anti-Aliasing. Improves stability when selecting a new host for an element within an In-place Wall. Improves stability during Copy/Paste operations.

Piping Installation 61

Piping Installation Building Information Modeling (BIM) Project Management Consulting Structural Systems 61

UK Construction Blog

MARCH 5, 2024

Utilising oak frames in construction offers sustainability benefits thanks to oak’s longevity and the eco-friendliness of timber as a building material. The process of building an oak frame extension requires careful consideration of design and structural requirements.

Building Materials 64

Building Materials Safety Regulations Structural Systems Roofing Systems 64

CivilJungle

APRIL 5, 2021

Slabs are structural elements manufactured from concrete constructed to produce flat surfaces, usually horizontal, in building floors, roofs, bridges. To supply plain ceiling surface giving preferable diffusion of sunlight. Flat slabs are utilized in parking decks, commercial buildings, hotels. Advantages of Flat Slab .

Concrete Pouring 52

Concrete Pouring Roofing Systems Fire Protection System Installation Flooring Systems 52

Building Information Management

JULY 27, 2016

The MasterFormat numbering system and titles provide a common, transparent manner to readily communicate construction item, tasks, and associated information. Divisions are the top Level (Level 1) in the hierarchy of the classification system. Measured Drawing Information. 00 42 73 Proposal Form – Performance Contract.

Fire Protection System Installation 45

Fire Protection System Installation Fire Protection Systems Collaboration Heavy Equipment Manufacturing 45

Building Information Management

JULY 27, 2016

The MasterFormat numbering system and titles provide a common, transparent manner to readily communicate construction item, tasks, and associated information. Divisions are the top Level (Level 1) in the hierarchy of the classification system. Measured Drawing Information. 00 42 73 Proposal Form – Performance Contract.

Fire Protection System Installation 45

Fire Protection System Installation Fire Protection Systems Collaboration Heavy Equipment Manufacturing 45

UK Construction Blog

JUNE 27, 2023

Whether you’re building a new home or upgrading your heating system, understanding how many radiators your property needs is crucial for keeping your home warm and comfortable. To ensure optimal performance, it is necessary to first calculate the BTU requirement of each room.

Energy Efficiency 52

Energy Efficiency Building Optimization Ceiling Systems Building Performance Measurement 52

Revit OpEd

JUNE 13, 2012

Further, we are unable to accurately or efficiently create a gbXML file for use in Green Building Studio, HAP, Trace, etc. If room separation lines are "off the table" then the architect would end up using something else like actual walls and hiding them. They might end up asking Autodesk to make more elements room defining?

Building Information Modeling (BIM) 76

Building Information Modeling (BIM) Zoning HVAC Systems Wall Systems 76

CivilJungle

MARCH 22, 2022

A dormer is a built-in wooden or brick structure conceived to count space and head measurement to a garret modification. A dormer is a built-in wooden or brick construction materialized from calculating space and dome measurement to a garret changeover. Wall Roof Dormer. Wall Dormer. Introduction of Dormer. Installation.

Roofing Systems 52

Roofing Systems Wall Systems Structural Systems Building Permits 52

Building Information Management

JULY 20, 2012

The clearance zones for the accessible WC package are based on documents such as BS 6465: Part 2 Sanitary installations and Approved Document M of the Building Regulations (E&W). Non-graphical data. The intention of the National BIM Library objects is that they follow the construction work flow. Consistent maintained data.

Building Information Modeling (BIM) 40

Building Information Modeling (BIM) Property Management Controls Manufacturing Ceiling Systems 40

Natural Building

JULY 22, 2008

Green Home Building and Sustainable Architecture. Sustainable architecture is an exciting and important field, with many people reviving traditional methods of building and others creating innovations to established practices. Kelly Hart has been involved with green building concepts for much of his life. Urban Green Building.

Green Building 40

Green Building Sustainability Architecture Building Codes 40

Building Information Management

JUNE 5, 2014

A multi-dimensional tool, Building Information Modelling (BIM) involves generating a visual model of the building which also manages data about it, at the design stage, throughout the construction phase and during its working life. What is BIM? Introduction. NBS National BIM Report 2013. Download report. Increasing exports.

Building Information Modeling (BIM) 51

Building Information Modeling (BIM) Building Materials Manufacturing Building Performance Measurement Facility Management 51