Construction Specifier

JUNE 3, 2024

Certified installers, especially those who carry substrate prep certification, are trained to assess and correct moisture and pH issues, so flooring projects start on the right foot, and help protect the integrity of the floor’s performance and design.

Flooring Systems 108

Flooring Systems Building Materials Manufacturing Concrete Pouring Controls Manufacturing 108

GCP Applied Technologies

JUNE 1, 2018

Reduce variability with an in-transit concrete management system. One way ready-mix producers can minimize leakage—rejected loads, back charges and material inefficiencies—is through improved consistency truck to truck, reducing variability of the concrete. All while delivering consistent, quality concrete truck after truck.

Concrete Pouring 60

Concrete Pouring Building Performance Measurement Quality Control Facility Management 60

Construction Marketing

JUNE 7, 2024

Unlike traditional garages, which are typically enclosed and attached to a building, these metal buildings installed are open-sided and can be put independently in a driveway, backyard, or any suitable outdoor space. Choose a level area in your driveway or backyard that can accommodate the desired size of the carport.

Heavy Equipment Manufacturing 107

Heavy Equipment Manufacturing Material Handling Concrete Pouring Building Materials Manufacturing 107

CivilJungle

NOVEMBER 1, 2020

How Is Concrete Made. Concrete is a composite material composed of fine and coarse aggregat e bonded together with a fluid cement ( cement paste ) that hardens (cures) over time. When aggregate is mixed with dry cement and water , the mixture forms a fluid slurry that is easily poured and moulded into shape.

Concrete Pouring 98

Concrete Pouring Building Materials Manufacturing Curing Building Materials 98

GCP Applied Technologies

MAY 31, 2018

In 2013, the ASTM C94/C94M Standard Specification for Ready-Mixed Concrete was revised to allow water additions during transit, for trucks equipped with automated slump and water management systems. Within the last two decades, however, the concrete industry has undergone quite a rapid technological evolution.

Concrete Pouring 60

Concrete Pouring Building Performance Measurement Facility Management Structural Systems 60

GCP Applied Technologies

MARCH 6, 2020

Concrete mix design. concrete / mix design. . Control flow concrete. Control flow concrete. Of all the enhancements we can make to concrete through the proper use of admixtures, entrainment of air is the most difficult. Control flow concrete. michael.delros…. Fri, 03/06/2020 - 18:13. March 06, 2020.

Concrete Pouring 78

Concrete Pouring Controls Manufacturing Building Materials Manufacturing Building Controls 78

GCP Applied Technologies

AUGUST 24, 2018

In addition, the City of Los Angeles has adopted Ordinance 175790, which states in part that building permits within certain “methane zones” will not be issued until the submittal of detailed plans for the installation of suitable methane mitigation systems. Protective measures against harmful gases. Building Envelope Solutions.

Concrete Pouring 60

Concrete Pouring Waterproofing Systems Structural Systems Health Regulations 60

GCP Applied Technologies

FEBRUARY 19, 2018

ASTM F710: Preparing the Concrete Floor. Why prepare the concrete slab? But just as important as these—and often overlooked—is careful preparation of the concrete slab. But just as important as these—and often overlooked—is careful preparation of the concrete slab. What constitutes a good concrete slab prep?

Concrete Pouring 60

Concrete Pouring Building Materials Manufacturing Flooring Systems Building Performance Measurement 60

GCP Applied Technologies

MAY 16, 2018

Ready mix concrete. The perishability of ready mix concrete makes it a complex product to ship. There's also a growing demand for sustainable concrete, to lower cement's carbon footprint—5% of global emissions come from cement production. Let's look at some of the technologies driving the ready mix concrete industry….

Concrete Pouring 60

Concrete Pouring Building Performance Measurement Quality Control Building Optimization 60

GCP Applied Technologies

DECEMBER 17, 2018

How two buildings in Seattle achieved high-strength concrete. Historically, the term "high-strength concrete" (HSC) has been relative. The latest edition of "Design and Control of Concrete Mixtures" (DCCM) considers HSC to be at a "strength significantly beyond that used in normal practice.". michael.delros….

Concrete Pouring 60

Concrete Pouring Quality Assurance Building Performance Measurement Quality Control 60

CivilJungle

MAY 1, 2022

What Is A Concrete Pump? A Concrete Pump is operated to transmit freshly blended concrete from the containers to where it must serve at the construction site, and therefore, it is an important differentia of any construction project. Concrete Pump on Construction Site. Types of Concrete Pump. Truck Mounted Pump .

Concrete Pouring 52

Concrete Pouring Building Materials Manufacturing Site Planning Piping Installation 52

CCR Magazine

JUNE 21, 2024

he towering skyscrapers that grace the cityscapes, the sturdy bridges that connect communities, and the intricate foundations of every home – all these marvels of construction rely heavily on a workhorse machine: the concrete pump. Imagine the backbreaking labor and logistical nightmare it would be to move tons of heavy, wet concrete by hand.

Concrete Pouring 52

Concrete Pouring Heavy Equipment Manufacturing Cost Control Controls Manufacturing 52

CivilJungle

JUNE 8, 2021

Introduction of Concrete Construction Tools for Construction Sites. Concrete is one of the most widely used building materials in the Construction Industry. There are various types of concrete construction tools are used on the construction site. Concrete construction tools help to complete the work fast with accuracy.

Concrete Pouring 52

Concrete Pouring Painting/finishing Heavy Lifting Transportation Material Handling 52

BDC Network

MARCH 29, 2024

Demystifying carbon offsets vs direct reductions 0 qpurcell Fri, 03/29/2024 - 11:18 Sustainability Chris Forney, Principal, Brightworks Sustainability, and Rob Atkinson, Senior Project Manager, IA Interior Architects, share the misconceptions about carbon offsets and identify opportunities for realizing a carbon-neutral building portfolio.

Energy Efficiency 85

Energy Efficiency Environmental Impact Assessment HVAC System Installation Building Standards 85

Civil + Structural Engineer

DECEMBER 1, 2023

The project leveraged four alternative delivery methods including: landside and airside construction management at-risk, a design-build-operate-maintain baggage team, design-bid-build award contracts and multiple design-build concession/tenant packages.

Engineering 130

Engineering Fire Protection System Installation Fire Protection Systems Environmental Consulting 130

UK Construction Blog

SEPTEMBER 22, 2023

The post Exploring the Benefits of Reinforced Autoclaved Aerated Concrete (RAAC) appeared first on UK Construction Blog. Do you know that reinforced autoclaved aerated concrete (RAAC) has played a significant role in public building construction over the past decades?

Safety Regulations 62

Safety Regulations Building Performance Measurement Building Materials Manufacturing Concrete Pouring 62

Construction Specifier

JULY 25, 2024

The construction process and various finishing activities, such as pouring concrete, or dry wall finishing, can generate large amounts of moisture. thick concrete floor slab poured in an enclosed building generates about 908 L (240 gal) water per 93 m 2 (1,000 sf) of concrete. A 102-mm (4-in.)-thick

Roofing Systems 59

Roofing Systems Construction Management Concrete Pouring Wall Systems 59

CivilJungle

APRIL 26, 2020

What Is Concrete? Concrete is the final product resulting from mixing cement , aggregates (including sand), water, and mixtures. The first use of concrete was by the Roman Empire. The Pantheon is the largest unreinforced concrete dome in the world, built-in 120 A.D. Different Types of Concrete. Dry lean Concrete.

Concrete Pouring 64

Concrete Pouring Steel Fabrication Building Materials Manufacturing Structural Systems 64

CivilJungle

MARCH 1, 2021

What Is Curing of Concrete? Curing performs a crucial role in the growth as well as the resilience of concrete strengths. Since applying water to that same concrete mixture there is an exothermic process that tends to toughen the concrete. Such an approach is termed the curing of concrete.

Curing 52

Curing Concrete Pouring Flooring Systems Wall Systems 52

CivilJungle

FEBRUARY 22, 2021

The device is then extracted from either the concrete as well as the interpretation of the penetration is allowed by observing the location of the clamp mostly on a rod. This allows the testing process more efficient for the operator and prevents any potential pause in the concrete operation. cm as well as a mass of 13.6

Concrete Pouring 52

Concrete Pouring Building Performance Measurement Wall Systems Foundation Systems 52

CCR Magazine

JANUARY 23, 2024

Some building materials are more durable than others, like stone and steel, but unfortunately the days of structures surviving thousands of years, like the Egyptian pyramids and Roman cathedrals, are over. Therefore, preventive maintenance of building exteriors has become more important than ever.

Maintenance 52

Maintenance Building Performance Measurement Inspection Roofing Systems 52

Construction Specifier

AUGUST 9, 2022

customers were not satisfied with accepting the system’s historical performance and European test results. They needed to be certain Tindall Superior Lightweight All-Purpose Beam (T-SLAB ® ) met International Building Code (IBC) requirements and would deliver the kind of performance Tindall customers have come to expect.

Flooring Systems 52

Flooring Systems Building Performance Measurement Structural Systems Building Products Distribution 52

CCR Magazine

OCTOBER 2, 2024

And while there are a lot of options out there, polished concrete stands out as the best choice for any new retail store. The Benefits of Polished Concrete Durability That Keeps Up With Foot Traffic Let’s face it—your store’s floors are going to take a pounding. Any good concrete finisher can walk you through the multitude of options.

Concrete Pouring 52

Concrete Pouring Cost Control Painting/finishing Building Performance Measurement 52

CivilJungle

JANUARY 4, 2022

Information of Cold Joint Concrete. Concreting is a critical process which required a strict supervision during placing and compaction of the concrete so as to achieve the desired strength. Cold joint in the concrete is a defect which occurs in the concrete due to improper or delayed placing of the concrete layers.

Concrete Pouring 52

Concrete Pouring Building Performance Measurement Building Materials Building Design 52

CivilJungle

DECEMBER 4, 2021

Instead of weight sometimes the volume of bitumen is specified, Presenting asphalt concrete mix design. For the measure of the temperature of water in the ductility apparatus bath thermometer is used. Again, measure the weight reading of the bottle. Apparatus OF Specific Gravity Test of Bitumen. Specific Gravity Bottles.

Concrete Pouring 52

Concrete Pouring Building Performance Measurement Roofing Systems Material Storage 52

Building Radar

JULY 17, 2024

For more on AI’s role in construction, check out this LinkedIn article on building the future with AI. By continuously monitoring the health and performance of equipment, AI systems can detect anomalies and wear-and-tear signs that human inspectors might miss.

Building Information Modeling (BIM) 52

Building Information Modeling (BIM) Building Performance Measurement Building Automation Building Optimization 52

CivilJungle

FEBRUARY 21, 2021

To provide a high-performance, smooth, and durable surface that can last several years and withstand heavy loads, epoxy coatings are typically applied over concrete floors. To maintain safe and secure conditions for staff, machinery, and inventory, many manufacturing sites, warehouses, and commercial buildings rely on epoxy floors.

Flooring Systems 52

Flooring Systems Concrete Pouring Curing Building Materials Manufacturing 52

CivilJungle

FEBRUARY 22, 2021

By doing sieve analysis with normal sieves, it is measured. By doing sieve analysis with normal sieves, it is measured. So, we require all sizes of sieves in the coarse aggregate measurement. Balance or scale with precision to measure 0.1% of the test sample’s weight. A set of IS sieves is used to sieve the sample.

Zoning 52

Zoning Concrete Pouring Building Performance Measurement Building Products Distribution 52

Building Radar

JULY 25, 2024

Building Information Modeling (BIM) Building Information Modeling (BIM) has become a cornerstone of modern construction management. Explore how drones are enhancing construction efficiency and site monitoring on Advanced Building Corporation. Enhancing Efficiency with Technology 1.

Building Information Modeling (BIM) 52

Building Information Modeling (BIM) Building Automation Building Performance Measurement Modular Construction 52

CivilJungle

APRIL 5, 2021

Slabs are structural elements manufactured from concrete constructed to produce flat surfaces, usually horizontal, in building floors, roofs, bridges. If reinforcement is required, slabs could also be pre-stressed or the concrete will be spilled over rebar positioned within the framework. What Is a Slab? Types of Slabs.

Concrete Pouring 52

Concrete Pouring Roofing Systems Fire Protection System Installation Flooring Systems 52

Construction Specifier

NOVEMBER 29, 2024

While there are many high-performance flooring solutions, including some custom options for specific uses, one surface stands above the rest in terms of versatility: hybrid carpet. The three layers are fused together to create a durable floor cover that looks like carpet but performs like a resilient sheet. What is hybrid carpet?

Flooring Systems 59

Flooring Systems Building Resilience Building Performance Measurement Environmental Impact Assessment 59

CivilJungle

MARCH 5, 2021

What Does a Hydrometer Measure? By measuring the amount of water that has been uprooted. In comparison to the stem which is reduced, the difference in such two measurements increases to the volume of the bulb. Measure from the neck to the tip of the bulb. D = Measurement of soil molecule in mm. Stopwatch. #6.

Building Performance Measurement 52

Building Performance Measurement Concrete Pouring Inspection Building Products Distribution 52

UK Construction Blog

JUNE 6, 2023

Ever wondered how concrete structures maintain their shape and strength during construction? Short Summary Shuttering is a critical component of concrete construction, with various materials and techniques providing structural support during the hardening process.

Steel Fabrication 52

Steel Fabrication Structural Systems Wall Systems Concrete Pouring 52

CivilJungle

MAY 1, 2021

That is used in concrete mixtures , fly ash increases the strength and isolation of the concrete and makes pumping smoother. Also, Read: 10 Difference Between Mortar and Concrete | What Is Mortar & Concrete | Types of Mortar & Concrete. Fly Ash in Concrete. Benefits of Fly Ash Concrete.

Concrete Pouring 52

Concrete Pouring Building Materials Manufacturing Building Materials Cost Control 52

CivilJungle

MAY 28, 2021

Construction is the methodology of developing a building or infrastructure. What is Building Construction? Building development is the methodology of addition of structure to property. The overwhelming majority of building construction projects are bijou renovations, like incrporation of a room, or repair of a bathroom.

Building Performance Measurement 52

Building Performance Measurement Building Materials Manufacturing Building Permits Project Management Consulting 52

CivilJungle

OCTOBER 29, 2021

What Does a Hydrometer Measure? By measuring the amount of water that has been uprooted. In comparison to the stem which is reduced, the difference in such two measurements increases to the volume of the bulb. Measure from the neck to the tip of the bulb. D = Measurement of soil molecule in mm. Stopwatch. #6.

Building Performance Measurement 52

Building Performance Measurement Concrete Pouring Inspection Building Products Distribution 52

CivilJungle

JANUARY 26, 2022

A rebar is a steel bar that is used in the concrete to provide extra strength to the structure. Also, read: What Is Unit Weight | What Is Density | What Is Unit Weight Material | Unit Weight Building Materials. Also, read: What Is Self Compact Concrete | What Is J-ring Test | Equipment of J-ring Test | Procedure of the J-Ring Test.

Steel Fabrication 52

Steel Fabrication Electrical Wiring Installation Concrete Pouring Wall Systems 52