Construction Specifier

JUNE 3, 2024

Certified installers, especially those who carry substrate prep certification, are trained to assess and correct moisture and pH issues, so flooring projects start on the right foot, and help protect the integrity of the floor’s performance and design. After 60 seconds, plus or minus five seconds, measure pH using a strip.

Flooring Systems 108

Flooring Systems Building Materials Manufacturing Concrete Pouring Controls Manufacturing 108

GCP Applied Technologies

FEBRUARY 19, 2018

Cutting corners on this critical step can lead to problems down the road that negatively impact the floor’s performance and shorten its lifespan. If using the probe test method for measuring moisture vapor emission rate (MVER) outlined in ASTM 2170, the maximum limit specified by ASTM F710 is 75% relative humidity (RH). VERSASHIELD.

Concrete Pouring 97

Concrete Pouring Building Materials Manufacturing Flooring Systems Building Performance Measurement 97

Construction Law

MARCH 4, 2025

Editors comment New Act no cure for procurement malaise Editor Nick Barrett asks whether the long awaited Procurement Act which came into force in February is likely to result in the improvement that the UKs public sector procurement needs.

Safety Regulations 40

Safety Regulations Real Estate Development Procurement Building Performance Measurement 40

CivilJungle

DECEMBER 11, 2020

The construction cost of the homes and the price of the building materials are rising day by day. It is necessary that a minimum of 7 days of curing should be done to the ferrocement components to avoid the shrinkage cracks. Curing is one of the most important parts which provides strength to the structure. Uses of Ferrocement.

Steel Fabrication 98

Steel Fabrication Structural Systems Waterproofing Systems Curing 98

CivilJungle

NOVEMBER 1, 2020

Concrete is a composite material composed of fine and coarse aggregat e bonded together with a fluid cement ( cement paste ) that hardens (cures) over time. Concrete is widely used building material all over the world in the Construction Industry. What Is a Concrete. Also, read: Top 10 Construction Companies in the USA. Aggregate

Concrete Pouring 98

Concrete Pouring Building Materials Manufacturing Curing Building Materials 98

GCP Applied Technologies

OCTOBER 1, 2018

air entrained concrete specifications should be clearly written and comply with Chapter 19 of ACI 318R-14 (Building Code Requirements for Structural Concrete). Place, finish, and cure properly. The resistance of concrete to freezing and thawing cycling is also impacted by placing, finishing, and curing procedures. Self leveling.

Quality Assurance 60

Quality Assurance Curing Quality Control Structural Systems 60

UK Construction Blog

MARCH 4, 2025

Taking Measurements and Creating a Budget Taking accurate measurements forms the foundation of a successful garage renovation plan. Measure the entire garage space including height, width, and depth using a tape measure. Allow adequate curing time before moving heavy items back into the garage.

Electrical Wiring Installation 52

Electrical Wiring Installation Material Storage Flooring Systems Ceiling Systems 52

GCP Applied Technologies

MARCH 3, 2020

Small variations in the coarse or fine aggregates in the concrete mix can have a dramatic effect on the concrete’s overall performance. Delivering, handling, placing, finishing and curing concrete can be difficult during the hot summer months. Fortunately, there are measures you can take to protect against these problems … more.

Concrete Pouring 78

Concrete Pouring Wall Systems Quality Control Fire Protection System Installation 78

Construction Specifier

SEPTEMBER 20, 2023

Structural silicone glazing (SSG) continues to grow in popularity for its aesthetic and performance characteristics. Its superior thermal performance compared to captured systems allows designers to enable compliance with more stringent energy standards and code requirements while reducing sightlines between glazed units.

Structural Systems 59

Structural Systems Building Performance Measurement Quality Control Building Code Compliance 59

GCP Applied Technologies

FEBRUARY 19, 2018

Cutting corners on this critical step can lead to problems down the road that negatively impact the floor’s performance and shorten its lifespan. If using the probe test method for measuring moisture vapor emission rate (MVER) outlined in ASTM 2170, the maximum limit specified by ASTM F710 is 75% relative humidity (RH). DUCTILCRETE®.

Concrete Pouring 60

Concrete Pouring Building Materials Manufacturing Flooring Systems Building Performance Measurement 60

Construction Specifier

DECEMBER 18, 2024

Its strength, durability, and resiliency are integral to sustainable building practices and support a growing emphasis on climate resilience. Designers, engineers, architects, and general contractors play an integral, interconnected role in selecting concrete products to meet the performance, safety, and schedule demands of a given project.

Concrete Pouring 52

Concrete Pouring Environmental Impact Assessment Building Performance Measurement Building Materials Manufacturing 52

Construction Specifier

SEPTEMBER 19, 2024

By Iltaz Alam and Marysusan Couturier Photo ©Chris Boswell/Dreamstime.com Ensuring a building’s durability and energy efficiency hinges on a continuous air barrier throughout the building enclosure. Properly implemented tie-ins enhance the energy efficiency and longevity of buildings and ensure the building envelope acts as one system.

Waterproofing Systems 52

Waterproofing Systems Building Materials Manufacturing Roofing Systems Building Materials 52

UK Construction Blog

OCTOBER 26, 2023

Preventative Measures for Spalling Brickwork Having learned how to repair spalling brickwork, you should now enact preventative measures to curtail the risk of future damage. Perform necessary maintenance, such as repointing mortar or replacing damaged bricks. Lastly, cure the mortar before use.

Masonry 64

Masonry Maintenance Wall Systems Structural Systems 64

CivilJungle

FEBRUARY 21, 2021

To provide a high-performance, smooth, and durable surface that can last several years and withstand heavy loads, epoxy coatings are typically applied over concrete floors. To maintain safe and secure conditions for staff, machinery, and inventory, many manufacturing sites, warehouses, and commercial buildings rely on epoxy floors.

Flooring Systems 52

Flooring Systems Concrete Pouring Curing Building Materials Manufacturing 52

Construction Specifier

FEBRUARY 10, 2025

to create an effective, durable, and building code-compliant assembly. These components and their effect on building performance are outside the scope of this article. Similarly, open-cell spray polyurethane foam (ocSPF) is used in building envelope assemblies as an air and thermal barrier.

Building Materials Manufacturing 52

Building Materials Manufacturing Building Performance Measurement Controls Manufacturing Building Materials 52

CivilJungle

JUNE 25, 2021

Concrete is one of the most widely used building materials in our construction industry. The concreting operation consists of measuring the ingredients, mixing them properly to obtain a uniform mixture, and placing the concrete in the moulds which are known as formwork. Introduction of Signs of Bad Concrete Pour. Uses of Concrete.

Concrete Pouring 52

Concrete Pouring Curing Building Materials Manufacturing Building Performance Measurement 52

CivilJungle

JUNE 17, 2021

What Is Honeycomb In Concrete | Cause of Honeycomb In Concrete| Cure of Honeycomb In Concrete | Types of Grouting. The strength of the concrete plays a vital role in the construction of any building. Flexural strength of the concrete is defined as the measure of an under-reinforced concrete beam or slab to resist failure in bending.

Curing 52

Curing Building Materials Manufacturing Building Materials Building Performance Measurement 52

Civil + Structural Engineer

DECEMBER 1, 2023

The project leveraged four alternative delivery methods including: landside and airside construction management at-risk, a design-build-operate-maintain baggage team, design-bid-build award contracts and multiple design-build concession/tenant packages.

Engineering 130

Engineering Fire Protection System Installation Fire Protection Systems Environmental Consulting 130

GCP Applied Technologies

DECEMBER 7, 2018

Air barriers: An essential part of the building envelope. Protecting your building envelope. How air leakage can impact building durability. Net zero building design and air leakage. Protecting your building envelope. How air leakage can impact building durability. Net zero building design and air leakage.

Building Code Compliance 60

Building Code Compliance Environmental Impact Assessment Building Codes Building Standards 60

Practical Law Construction

JULY 28, 2022

They are a consequence of the tragic fire at Grenfell Tower in June 2017, which led to a wave of inspections, investigations and scrutiny across the UK as building owners sought to ascertain whether or not their buildings were similarly defective. Martlet v Mulalley: background. A judgment of wider applicability?

Wall Systems 52

Wall Systems Safety Regulations Building Performance Measurement Building Standards 52

CCR Magazine

JUNE 3, 2024

It doesn’t only affect the performance of your aircon unit, but also your indoor air quality. Routinely cleaning the inside of your air conditioner also improves its performance and longevity. Hence, it’s crucial that you take measures to protect both the immediate environment and your health.

Inspection 52

Inspection HVAC System Installation Energy Efficiency Building Performance Measurement 52

CivilJungle

APRIL 26, 2020

After compaction, this concrete provides high density and finally cures into a strong monolithic block. Also, read: How to Building Construction Process Step by Step. Also, read: Building Estimation Step by Step In Excel Sheet. Nervi to build a large number of pleasing structural forms. Asphalt Concrete.

Concrete Pouring 64

Concrete Pouring Steel Fabrication Building Materials Manufacturing Structural Systems 64

CivilJungle

JANUARY 8, 2022

In the measurement MPa, the grade of concrete is expressed. By having adequate cement, the desired low permeability in concrete is achieved, by ensuring full compaction of concrete and by adequate curing sufficient low water/ cement ratio. By strength of the concrete and the composition, the grades of concrete are defining. Durability.

Modular Construction 52

Modular Construction Building Performance Measurement Building Codes Building Materials 52

Construction Specifier

SEPTEMBER 17, 2020

The major challenge with epoxy is that floor aesthetics and performance are difficult to accurately determine until after the floor is installed and fully cured. Installation is straightforward as the coating is rolled on in a multistep process in which the base layer and topcoat are applied over the primed floor.

Flooring Systems 52

Flooring Systems Controls Manufacturing Building Materials Manufacturing Cost Control 52

CivilJungle

JUNE 30, 2022

Core knife examination is searching for the power of actual building. Three cores should separate at every building field for power examination. The concrete core test results measure these editing factors based on the L/D rate of the core test. All About Building Maintenance | What Is Building Maintenance | Type of Maintenance.

Building Performance Measurement 52

Building Performance Measurement Building Materials Manufacturing Painting/finishing Green Building 52

UK Construction Blog

JUNE 6, 2023

Proper shuttering and reinforcement are essential for ensuring the column’s strength and durability, as well as preventing concrete from leaking out during vibration and curing. Wall Shuttering Wall shuttering is used for constructing RCC or shear walls in dams and basements, made of upright timbers, plywood, and bracing boards.

Steel Fabrication 52

Steel Fabrication Structural Systems Wall Systems Concrete Pouring 52

CCR Magazine

NOVEMBER 28, 2023

Use of recycled or upcycled parts in plumbing systems exemplify measures taken towards sustainability. Water Conservation Measures With escalating concerns about the scarcity of water resources globally , water conservation has become an increasing priority in the plumbing industry.

Plumbing 52

Plumbing Plumbing Systems Energy Conservation Piping Installation 52

CivilJungle

JANUARY 4, 2022

Whether cold joint concrete affects the structural stability of the building? The cold joint presence badly impacts the performance of the concrete. There are various bad effects of the cold joint concrete on the building which are as follows. The question may arise in your mind that whether the cold joints in concrete is bad?

Concrete Pouring 52

Concrete Pouring Building Performance Measurement Building Materials Building Design 52

CivilJungle

JUNE 22, 2021

Concrete is one of the most widely used building materials in the construction industry all over the world. If further use of such buildings continued it will endanger the lives of the people and the surrounding habitat. What Is Honeycomb In Concrete | Cause of Honeycomb In Concrete| Cure of Honeycomb In Concrete | Types of Grouting.

Building Materials Manufacturing 52

Building Materials Manufacturing Structural Systems Masonry Curing 52

CivilJungle

MARCH 20, 2021

Also, Read: What Is Fire Escape Staircases | Types of Fire Escaping Stairs | What Is the Importance of Fire Escape in the Building | What Are the Fire Staircase Requirements. That being said, shellac could be used on current resins given that there is adequate time for thin coats to also be cured. Application of Varnish.

Painting/finishing 59

Painting/finishing Historic Preservation Concrete Pouring Staircases 59

CivilJungle

MAY 1, 2021

As ash-containing concrete is fully cured, ash-containing reaction products occupy the gaps between hydrating cement particles, further reducing concrete permeability to water and offensive chemicals. Road- building projects utilizing PCC will use a huge amount of asphalt , and the replacement of fly ash has major economic advantages.

Concrete Pouring 52

Concrete Pouring Building Materials Manufacturing Building Materials Cost Control 52

Building Information Management

JULY 27, 2016

Standardized cost databases have been introduced based upon MasterFormat that enable construction owners, service providers, building product manufactures, and technology providers to improve cost visibility and also expand upon using historical and/or custom cost data. Measured Drawing Information. design/negotiate/build).

Fire Protection System Installation 45

Fire Protection System Installation Fire Protection Systems Collaboration Heavy Equipment Manufacturing 45

Building Information Management

JULY 27, 2016

Standardized cost databases have been introduced based upon MasterFormat that enable construction owners, service providers, building product manufactures, and technology providers to improve cost visibility and also expand upon using historical and/or custom cost data. Measured Drawing Information. design/negotiate/build).

Fire Protection System Installation 45

Fire Protection System Installation Fire Protection Systems Collaboration Heavy Equipment Manufacturing 45

Construction Specifier

JANUARY 10, 2025

By Amy Becker Photo 2017 DJ Srki/courtesy Shutterstock High-performance facades start with high-performing glass. Insulating glass units (IGUs) are a critical component of glazing system performance. If one does not know, the IGU can slide apart during the rest of the build.

Building Performance Measurement 111

Building Performance Measurement Curing Quality Assurance Quality Control 111

CCR Magazine

FEBRUARY 10, 2025

The correct installation of these driveways will improve your property’s exterior appearance and offer outstanding performance. Resin driveways stand out because they offer both versatile applications and long-lasting performance. Here’s everything you need to know about installing your resin driveway.

Curing 52

Curing Building Performance Measurement Building Materials Site Planning 52

Construction Specifier

JANUARY 15, 2025

This growing problem underscores the need for specifiers to take proactive measures to protect building exteriors during the design and construction phases and beyond. Once cured, they create a surface that causes the paint to run and bead up, deterring graffiti artists who seek clean surfaces for their tags.

Building Materials 59

Building Materials Painting/finishing Building Performance Measurement Building Design 59

Construction Daily News

FEBRUARY 20, 2025

The research blames decades of poor performance for home-building productivity falling behind the economy. Government, homeowners, building businesses, and workers must collaborate to fix the issue. Measure productivity Many types of housing exist. The National Housing Accord requires the federal government to build 1.2

Building Commissioning 52

Building Commissioning Approvals Government Works Quality Assurance 52