Building Radar

AUGUST 28, 2024

A construction defect is any flaw in the design, materials, or workmanship of a building that leads to its failure or inability to function as intended. These defects can range from minor aesthetic issues, like cracked tiles, to more severe structural concerns that could compromise the safety and integrity of the building.

Building Materials Manufacturing 71

Building Materials Manufacturing Building Performance Measurement Foundation Systems Risk Management 71

Building Radar

JULY 25, 2024

As we progress through 2024, several emerging trends in green building technology are paving the way for more sustainable and efficient construction practices. Cross-Laminated Timber (CLT) One of the most significant innovations in green building is the use of cross-laminated timber (CLT). The Rise of Sustainable Innovations 1.

Green Building 52

Green Building Renewable Energy Systems Sustainability Energy Efficiency 52

CCR Magazine

JANUARY 31, 2024

During a building’s initial construction, providing fall protection for workers assembling, erecting, and/or finishing roof trusses is a difficult task with complicated challenges. During the lifetime of the building, the safety of individuals accessing the roof for a multitude of reasons must be considered.

Roofing Systems 52

Roofing Systems HVAC System Installation Safety Regulations HVAC Systems 52

Construction Specifier

SEPTEMBER 5, 2024

Even when people are inside, it is hard to block out intruding and distracting noises within the space people are in; noise coming from adjacent rooms, areas above or below, or from hallways; or even from outside the building. The purpose of the building determines what types of noise pollution creates “pain points” for occupants.

Building Performance Measurement 64

Building Performance Measurement Ceiling Systems Project Management Consulting Flooring Systems 64

Construction Specifier

DECEMBER 20, 2024

By Benjamin Meyer Photos courtesy Siplast In the ever-changing landscape of modern construction, owners and designers are facing an onset of challenges when it comes to building for resilience. Making future-focused project decisions in the design phase can have a significant impact on the durability of the building over time.

HVAC System Installation 52

HVAC System Installation Building Resilience Building Performance Measurement Building Codes 52

Stok

AUGUST 19, 2021

An integrated design charrette allows stakeholders like the investment team, property management, and building occupants to share their perspectives and ideas about the project at a time when their feedback can still be easily and inexpensively incorporated into the design. A few of these key strategies are outlined below. #1:

Renewable Energy Systems 52

Renewable Energy Systems Building Performance Measurement Real Estate Development Building Commissioning 52

BD+C

MARCH 2, 2023

The next steps for a sustainable, decarbonized future 0 qpurcell Thu, 03/02/2023 - 13:03 Sustainability For building owners and developers, the push to net zero energy and carbon neutrality is no longer an academic discussion. Government regulators are increasingly requiring that buildings perform more efficiently.

Renewable Energy Systems 52

Renewable Energy Systems Sustainability Energy Efficiency Energy Conservation 52

Autodesk Construction Cloud

DECEMBER 21, 2023

We don't always throw around the word "revolutionary," but building information modeling (BIM) has truly been that over the last few decades. Remember, BIM is all about creating and managing the information of buildings. Shape 3D is the fundamental and most common use of BIM, and it represents the basic structure of a building.

Building Information Modeling (BIM) 98

Building Information Modeling (BIM) Schedule Management Environmental Impact Assessment Building Optimization 98

CCR Magazine

JUNE 13, 2024

Green Building Practices Sustainability continues to be at the forefront of commercial construction , with an increased focus on eco-friendly building materials, energy-efficient systems, and sustainable designs. This trend not only addresses environmental concerns but also enhances marketability and long-term value.

Building Information Modeling (BIM) 52

Building Information Modeling (BIM) Building Materials Manufacturing Energy Efficiency Building Automation 52

CivilJungle

JUNE 1, 2022

Also, Read: What Is Skillion Roof | Types of Skillion Roof | Uses of Skillion Roof | How to Build a Skillion Roof. The acquisition of interlayers, such as manufacturer buildings to office buildings, needs several extra layers inside the plant. Methods of Retrofitting Building.

HVAC System Installation 52

HVAC System Installation Fire Protection System Installation Energy Efficiency Structural Systems 52

UK Construction Blog

NOVEMBER 8, 2023

It serves as a barrier, resisting the flow of heat through walls, roofs, and floors, thus maintaining a building’s temperature irrespective of external weather conditions. Effective insulation reduces the strain on heating and ventilation systems, cutting down the carbon emissions associated with energy production.

Energy Efficiency 64

Energy Efficiency Energy Conservation Environmental Impact Assessment Building Products Distribution 64

CCR Magazine

JANUARY 23, 2024

Some building materials are more durable than others, like stone and steel, but unfortunately the days of structures surviving thousands of years, like the Egyptian pyramids and Roman cathedrals, are over. Therefore, preventive maintenance of building exteriors has become more important than ever.

Maintenance 52

Maintenance Building Performance Measurement Inspection Roofing Systems 52

CCR Magazine

NOVEMBER 30, 2023

To achieve this, factory managers and owners need to implement effective strategies that focus on regular maintenance, inspections, upgrades, and proactive measures to address potential issues. Conduct thorough inspections of building structures, roofs, flooring, and walls to detect any signs of wear, corrosion, or damage.

Environmental Impact Assessment 40

Environmental Impact Assessment Safety Regulations Building Performance Measurement HVAC Systems 40

CCR Magazine

NOVEMBER 5, 2024

In this blog, we’ll explore how creating a maintenance schedule can save you time and money, while ensuring your commercial build out stays in top shape. This includes routine checks like HVAC servicing, plumbing inspections, and electrical system evaluations. Once you have your list, it’s time to categorize these tasks.

Maintenance 52

Maintenance Schedule Management HVAC System Installation Facility Management 52

UK Construction Blog

JANUARY 29, 2024

The increasing awareness of environmental impacts caused by consumption has heightened interest in sustainability and green practices, particularly in the building and construction industry. Such designs reduce the building’s carbon footprint and ensure efficient energy use, setting a standard for future construction projects to follow.

Renewable Energy Systems 64

Renewable Energy Systems Green Building Energy Efficiency Building Materials Manufacturing 64

Buildern

MAY 4, 2023

Importance of Construction Terminology Building terms and unique collocations are like the secret sauce that makes communication in the industry smooth and efficient. Think of it like building a sturdy foundation for your knowledge. Get ready to explore the building blocks of construction and the fancy words that come with them!

Fire Protection System Installation 52

Fire Protection System Installation Electrical Wiring Installation HVAC System Installation Heavy Lifting Transportation 52

UK Construction Blog

JANUARY 29, 2025

Whether you’re planning a home renovation or overseeing a commercial build, this financial management tool helps ensure your project stays within budget while achieving its goals efficiently.

Budgeting 52

Budgeting Insurance Management Building Permits Structural Systems 52

Construction Daily News

DECEMBER 10, 2023

Adopting the necessary measures for a sustainable construction project is a conscientious step toward creating functional and environmentally responsible structures. In the United States, building and demolition projects create approximately 600 million tons of waste annually.

Sustainability 40

Sustainability Budgeting Renewable Energy Systems Roofing Systems 40

Construction Specifier

OCTOBER 30, 2024

Many architectural materials have a place in healthcare design but must meet stringent performance standards before they are deemed appropriate for these demanding environments. Anti-ligature is a safety measure that prevents people from using ligatures—objects that are used to tightly bind or tie things together—to harm themselves.

Steel Fabrication 59

Steel Fabrication Building Materials Manufacturing Building Materials Fire Protection System Installation 59

CCR Magazine

APRIL 30, 2024

The damage can often seem impossible, from burst pipes flooding basements to raging storms tearing off roofs. Storm Damage Restoration: Repair exterior damage, including windows, roofing, and siding, caused by hail, wind, or floods. Monitor and document humidity measurements daily to assess drying progress.

Material Handling 52

Material Handling Roofing Systems HVAC System Installation Approvals 52

CivilJungle

FEBRUARY 27, 2021

16 Types of Building Components. Components of Building are as follows. Substructure: The substructure is the part of the building that is underneath the ground, while the superstructure is everything that is above ground. It offers significant stabilization in the region of building settlements or damaged buildings.

Painting/finishing 52

Painting/finishing Foundation Systems Wall Systems Flooring Systems 52

CivilJungle

MAY 28, 2021

Construction is the methodology of developing a building or infrastructure. What is Building Construction? Building development is the methodology of addition of structure to property. The overwhelming majority of building construction projects are bijou renovations, like incrporation of a room, or repair of a bathroom.

Building Performance Measurement 52

Building Performance Measurement Building Materials Manufacturing Building Permits Project Management Consulting 52

Job Order Contracting

SEPTEMBER 12, 2018

Preventive maintenance services should be performed by a qualified manufacturer’s service representative. Notify affected personnel before performing PM (alarmed or security entrances). Observe performance of various components, such as brake, limit switches, door operating speed, motor, gear box, etc. Standard tools – basic 2.

Maintenance 40

Maintenance Fire Protection System Installation Fire Protection Systems Electrical Wiring Installation 40

Revit OpEd

APRIL 14, 2016

Last night I was able to download and install Building Design Suite 2017 from my Autodesk subscription account. In a project it might look this if we create a unique subcategory for Building Edges and Roof Drains. We can now sketch railings onto the top faces of floors, slabs, slab edges, walls, or roofs.

Steel Fabrication 75

Steel Fabrication Schedule Management Piping Installation Wall Systems 75

ENR Construction

JULY 22, 2012

Building Types. McKinstry continues to pursue its traditional HVAC work. Here, team members install a mechanical unit of the roof of a Seattle-area data center. The design-build mechanical contractor sums up its services in its motto, "For the Life of Your Building." SUBSCRIBE TODAY & receive immediate web access.

Facility Management 34

Facility Management Building Information Modeling (BIM) Electrical Systems Specialty Contracting 34

Building Radar

SEPTEMBER 9, 2024

Whether you’re a construction manager, contractor, architect, or just someone involved in a building project, understanding the terminology is crucial. Sustainable construction refers to building practices that aim to minimize the environmental impact of a project throughout its lifecycle.

General Contracting 52

General Contracting Building Code Compliance Building Materials Manufacturing Project Management 52

CCR Magazine

DECEMBER 26, 2023

After a comprehensive year-long search, Brad Jacobs has announced his intention to create a market leader in building products distribution — an industry with approximately $800 billion in annual revenue between North America and Europe, according to industry estimates. The company will be called QXO, Inc.

Building Products Distribution 52

Building Products Distribution Risk Management Building Commissioning Building Materials 52

Building Information Management

JULY 27, 2016

The MasterFormat numbering system and titles provide a common, transparent manner to readily communicate construction item, tasks, and associated information. Divisions are the top Level (Level 1) in the hierarchy of the classification system. Measured Drawing Information. 00 42 73 Proposal Form – Performance Contract.

Fire Protection System Installation 45

Fire Protection System Installation Fire Protection Systems Collaboration Heavy Equipment Manufacturing 45

Building Information Management

JULY 27, 2016

The MasterFormat numbering system and titles provide a common, transparent manner to readily communicate construction item, tasks, and associated information. Divisions are the top Level (Level 1) in the hierarchy of the classification system. Measured Drawing Information. 00 42 73 Proposal Form – Performance Contract.

Fire Protection System Installation 45

Fire Protection System Installation Fire Protection Systems Collaboration Heavy Equipment Manufacturing 45

Building Information Management

JULY 26, 2016

ARS: Asbestos Roof Shingles. BL: Base Line, Building Line, Block. BLDG: Building. BUR: Built-up Roof. CTSC: Communications Systems Terminal Cabinet. EIFS: Exterior Insulation and Finish System. FBM: Foot Board Measure. ANT: Antenna. AP: Access Panel. APPD: Approved. APPROX: Approximate. of cement).

Painting/finishing 40

Painting/finishing Fire Protection System Installation Electrical Wiring Installation Fire Protection Systems 40

Building Information Management

JULY 26, 2016

ARS: Asbestos Roof Shingles. BL: Base Line, Building Line, Block. BLDG: Building. BUR: Built-up Roof. CTSC: Communications Systems Terminal Cabinet. EIFS: Exterior Insulation and Finish System. FBM: Foot Board Measure. ANT: Antenna. AP: Access Panel. APPD: Approved. APPROX: Approximate. of cement).

Painting/finishing 40

Painting/finishing Fire Protection System Installation Electrical Wiring Installation Fire Protection Systems 40

Job Order Contracting

JANUARY 13, 2017

ARS: Asbestos Roof Shingles. BL: Base Line, Building Line, Block. BLDG: Building. BUR: Built-up Roof. CTSC: Communications Systems Terminal Cabinet. EIFS: Exterior Insulation and Finish System. FBM: Foot Board Measure. ANT: Antenna. AP: Access Panel. APPD: Approved. APPROX: Approximate. of cement).

Painting/finishing 40

Painting/finishing Fire Protection System Installation Electrical Wiring Installation Fire Protection Systems 40

Work Gearz

OCTOBER 5, 2020

Making a house or an industry or a commercial building is our dream, but we cannot make it come true without the help of the construction workers who work day and night in the hazardous environments, handle cements and sand, walk in watery areas and carry those heavy bricks and loads. Isn’t that cool? Work Pants for Construction Workers.

Building Products Distribution 40

Building Products Distribution Site Planning Fire Protection System Installation Change Management 40

CCR Magazine

MARCH 2, 2025

The All-Spectrum UV Monitoring System from Aerapy offers a seamless, real-time solution for measuring and reporting multiple ultraviolet (UV) wavelengths in critical HVAC airstream disinfection and coil-cleaning applications. Key features of the All-Spectrum UV Monitoring System include: 1.

HVAC Systems 52

HVAC Systems Building Performance Measurement Building Automation Roofing Systems 52

Civil + Structural Engineer

DECEMBER 10, 2024

With so many advancements in construction, owners and developers face a unique set of challenges when it comes to building resilience. Evolving energy codes, frequent and intense weather events, and growing awareness of embodied carbon in construction materials highlight the importance of long-term thinking in building design and development.

Building Code Compliance 130

Building Code Compliance Building Codes Building Resilience HVAC System Installation 130

Building Information Management

JUNE 22, 2012

The core competencies identified include competencies relating to building operations and maintenance, energy management, sustainability, water efficiency, safety (including electrical safety) and building performance measures. Fede ral Buildings Personnel Training Act.

Building Performance Measurement 45

Building Performance Measurement Fire Protection System Installation Renewable Energy Systems Fire Protection Systems 45

UK Construction Blog

MARCH 5, 2025

The post How Construction Companies Can Adopt the Green Building Trend appeared first on UK Construction Blog. Not surprisingly, more and more construction companies are keen to adopt green building techniques. This article explains how construction companies can embrace the green building trend.

Green Building 52

Green Building HVAC System Installation Energy Efficiency Energy Conservation 52