Construction and Infrastructure Law

APRIL 6, 2022

On March 11, 2022, the Department of Labor (“DOL”) proposed reverting the definition of “prevailing wage” under the Davis-Bacon Act to a definition used over 40 years ago. Renewable energy projects under the Build Back Better Act (if enacted into law) will likely involve work that is cutting edge and innovative.

Renewable Energy Systems 52

Renewable Energy Systems Energy Efficiency Public Works Green Building 52

The Pro Builder

AUGUST 3, 2023

And there are definitely some things we can do, from simplification and standardization to off-site construction, automation, vertical integration, and housing design. Standardization. Very few home builders have followed the standardization of other industries. SKU standardization is at the heart of efficiency.

Building Materials Manufacturing 130

Building Materials Manufacturing Building Standards Site Planning Change Management 130

Civil + Structural Engineer

JUNE 10, 2024

Fabric building companies offer several services to help ensure successful facility projects. By Eric Donnay, Legacy Building Solutions Decades ago, acquiring a tension fabric structure didn’t require much of a process. Today, users can procure a tension fabric building where every detail is developed with optimal utilization in mind.

Steel Fabrication 130

Steel Fabrication Controls Manufacturing Structural Systems Building Design 130

Construction and Infrastructure Law

APRIL 6, 2022

On March 11, 2022, the Department of Labor (“DOL”) proposed reverting the definition of “prevailing wage” under the Davis-Bacon Act to a definition used over 40 years ago. Renewable energy projects under the Build Back Better Act (if enacted into law) will likely involve work that is cutting edge and innovative.

Renewable Energy Systems 52

Renewable Energy Systems Energy Efficiency Public Works Green Building 52

Civil + Structural Engineer

JUNE 12, 2023

Prepared by PPI’s Building & Construction Division, PPI MS-7 Model Specification for Plastic Piping Materials for Ground Source Geothermal Applications applies to plastic piping materials for open- and closed-loop, horizontal and vertical, direct-buried, and submerged water-based ground-source geothermal heat exchange systems.

Piping Installation 130

Piping Installation Building Products Distribution Building Materials Building Codes 130

UK Construction Blog

JUNE 6, 2024

The post Loft Hatches and Fire Regulations for New Buildings in the UK appeared first on UK Construction Blog. Introduction When it comes to building safety, especially in new constructions, loft hatches often go unnoticed. Fire-Rated Hatches: Specifically engineered to resist fire and smoke, complying with fire safety standards.

Safety Regulations 51

Safety Regulations Building Code Compliance Electrical Wiring Installation Building Materials 51

Job Order Contracting

MAY 11, 2023

Objectively VALIDATE Contractor and Subcontractor Construction Cost Estimates Construction cost management capabilities are critical to the success of any repair, renovation, maintenance, or new build activity. 2 Validating contractor estimates using a locally researched cost database can save 30%-40% of overall project costs. #3

Estimating 64

Estimating Risk Management Building Standards Project Management 64

Job Order Contracting

MAY 5, 2023

Construction cost management capabilities are critical to the success of any repair, renovation, maintenance, or new build activity. Questions every real property should ask before procuring a repair, renovation, maintenance, or new build service. #1 4 Is the cost estimate organized using a standard data architecture (i.e.

Construction Management 84

Construction Management Estimating Procurement Change Management 84

Construction Specifier

SEPTEMBER 22, 2023

By Michael Tierney and Karen Bishop There are multitudes of standards for builders’ hardware that, not only provide precise definitions for hardware terminology, but also establish and describe rigorous testing methods to evaluate their performance. Bored and Preassembled Locks and Latches A156.2-2022

Building Materials Manufacturing 52

Building Materials Manufacturing Building Standards Building Codes Building Materials 52

CivilJungle

FEBRUARY 9, 2021

Definition of Design Period: Design period could be defined as the number of years in the near future in which the supply will surpass the demand. Also, Read: What Is Pier and Beam Foundation | Advantages & Disadvantage of Pier and Beam Foundations | Pier and Beam Foundation Design | How to Build a Post and Pier Foundation.

Piping Installation 52

Piping Installation Foundation Systems Structural Systems Wall Systems 52

Construction Superintendent Magazine

AUGUST 22, 2013

A nationwide group of Building Information Modeling users, known as the BIMForum, released the first-of-its kind standard establishing definitions for how complete Building Information Models need to be for different stages of the design and construction process. frontpage'

Building Information Modeling (BIM) 40

Building Information Modeling (BIM) Building Standards Building Design 40

Job Order Contracting

DECEMBER 20, 2022

Mitigating Uncertainty in Facilities Repair, Renovation, Maintenance, and New Builds is a proven way to reduce waste and consistently deliver quality outcomes on time and on budget. The post Mitigating Uncertainty in Facilities Repair, Renovation, Maintenance, and New Builds appeared first on 4BT. CSI Masterfomat). contact-form].

Maintenance 89

Maintenance Change Management Facility Management Procurement 89

Civil + Structural Engineer

SEPTEMBER 1, 2023

Environmental benefits are making an even stronger case for opting to use tents rather than the standard steel storage container both for new builds and major renovation projects. We can locate and access building materials quickly and quietly in the middle of the night during a remodel.

Material Storage 246

Material Storage Steel Fabrication Fire Protection System Installation Building Materials 246

Building Information Management

JUNE 25, 2012

‘Building Information Modelling (BIM) is digital representation of physical and functional characteristics of a facility creating a shared knowledge resource for information about it forming a reliable basis for decisions during its life cycle, from earliest conception to demolition.” ” – RICS. ” – RICS.

Building Information Modeling (BIM) 63

Building Information Modeling (BIM) Facility Management Building Standards Property Management 63

OmTrak

NOVEMBER 2, 2023

Operations and Maintenance (O&M) Manuals are essential documents that connect the construction phase to efficient building management, guiding the way for seamless operation and maintenance. We understand the vital role these manuals play in building management.

Building Code Compliance 76

Building Code Compliance Warranty Schedule Management Roofing Systems 76

BDC Network

JULY 17, 2023

Jacob D’Albora, Director of Digital Building Operations Augmented Reality Big Data BIM and Information Technology In the fast-paced world of digital transformation, organizations from all industries are embracing innovative technologies to revolutionize their operations. Key Results: Develop and implement data standardization guidelines.

Building Information Modeling (BIM) 98

Building Information Modeling (BIM) Handover Building Optimization Building Performance Measurement 98

Job Order Contracting

FEBRUARY 1, 2023

Real property owner leadership, competency, accountability, and commitment – Owners pay the bills are utimately responsible for stewardship of the build environment. Proper leverage of technology – Technology should enable people and process and not dictate process.

Facility Management 52

Facility Management Construction Management Property Management Change Management 52

Job Order Contracting

JANUARY 22, 2021

Clear definition of information requirements, aligned with robust Lean processes, and collaborative delivery teams is a proven pathway to best value construction. Learn more… The post Managing Best Value Construction appeared first on 4BT.

Construction Management 59

Construction Management Lean Construction Procurement Change Management 59

Autodesk Construction Cloud

JANUARY 23, 2024

This month, we have 40+ product releases across Autodesk Construction Cloud , including Autodesk Build, Autodesk BIM Collaborate, Autodesk Takeoff, BuildingConnected, and Assemble. These insights will provide account admins with the data they need to make informed decisions on how to promote standardization.

Building Information Modeling (BIM) 105

Building Information Modeling (BIM) Building Products Distribution Project Management Change Management 105

Construction Specifier

JUNE 25, 2024

and Steven Gaynor, MBA Photo courtesy Tenmat New York City recently became the first jurisdiction in the country to reject and rewrite major sections of the International Building Code’s ( IBC ’s) language around fire protection in exterior facades. For decades, buildings have relied on intumescent materials for fire control.

Fire Protection System Installation 59

Fire Protection System Installation Fire Protection Systems Building Code Compliance Wall Systems 59

BD+C

JULY 16, 2014

The General Services Administration’s Net-Zero Energy Task Group is working on a draft letter with clear goals and guidance for net-zero energy buildings by this September. The committee recently created a provisional definition of net-zero energy buildings (NZEBs). Standards'

Building Standards 92

Building Standards 92

CivilJungle

SEPTEMBER 6, 2020

Hard Hat Colour Definition. There are specific standard hard hat colour codes that are pre-defined for the safety helmet based on the nature of the work ok are the responsibility of the job on the particular site. What Is Unit Weight | What Is Density | What Is Unit Weight Material | Unit Weight Building Materials.

Building Codes 52

Building Codes Green Building Construction Machinery Building Materials 52

Job Order Contracting

JANUARY 25, 2021

Failure to require common terms, definitions, and data environments Failure to leverage locally researched detailed line item cost data ‘Ad-hoc’ data management resulting in duplication of effort, errors, and omissions. The development of life-cycle costing for buildings. Building Research & Information.

Construction Management 101

Construction Management Procurement Cost Control Infrastructure Development 101

Roads Online

SEPTEMBER 27, 2023

The other issue is related to the current definition of waste and its reuse, which in some states is subject to strict EPA regulations limiting the capacity to recycle materials. This lack of a system discourages designers and contractors from using secondary materials due to potential risks and liabilities.

Building Materials 105

Building Materials Safety Regulations Risk Management Building Standards 105

Job Order Contracting

AUGUST 20, 2023

To meet their responsibilities as stakeholders of the built environment ( facilities and other built structures ), public sector owners need to have the ability create credible construction cost estimate for ALL repair, renovation, maintenance (FSRM), and new build projects. and maintenance information into the building knowledge base.

Estimating 87

Estimating Structural Systems Schedule Management Risk Management 87

CCR Magazine

FEBRUARY 8, 2024

Unlike standard cameras that capture visible light, thermal imaging cameras detect and visualize heat signatures based on any object’s temperature differences. To uncover hidden problems Thermal imaging is highly effective at identifying possible defects within the heat spread of a building.

Energy Efficiency 59

Energy Efficiency Electrical Systems Inspection HVAC Systems 59

Job Order Contracting

DECEMBER 7, 2020

Collaborative construction cost estimating provides guidance to organizations seeking improved cost visibility and transparency for repair, renovation, maintains and new build projects as well as overall facilities and physical infrastructure management. The post Collaborative Construction Cost Estimating 2021 appeared first on 4BT.

Estimating 58

Estimating Collaboration Integrated Project Delivery (IPD) Lean Construction 58

Construction Dive

AUGUST 28, 2013

We want to strike a balance between keeping it current, … keeping it state of the art, and changing it all the time.

Building Information Modeling (BIM) 128

Building Information Modeling (BIM) Building Standards Building Design 128

CCR Magazine

JUNE 12, 2024

The Role of Construction in Sustainable Development Eco-Friendly Materials: Choosing the right material is a crucial element in the concept of green building. They act both as environmentally friendly solutions and as additions to the construction that will improve the appearance of a building as well as functionality.

Sustainability 52

Sustainability Energy Conservation Renewable Energy Systems Environmental Impact Assessment 52

Job Order Contracting

FEBRUARY 8, 2023

The process enables the accurate definition of labor, material, and equipment requirements to perform a specific task. Such analyses were, in turn, used as aids to standardization of work and in checking the efficiency of people and equipment and the mode of their combination. The value of time and motion study is clear.

Building Performance Measurement 52

Building Performance Measurement Estimating Construction Equipment Building Materials 52

Construction Specifier

MAY 31, 2024

These assemblies lack many necessary components that comprise an effective building enclosure system. Issues related to this wall assembly have led to numerous buildings requiring extensive repairs, and in some cases, full recladding, or even demolition. During the transition from mass masonry walls to the “four barrier” (i.e.

Masonry 64

Masonry Wall Systems Building Codes Waterproofing Systems 64

Civil + Structural Engineer

SEPTEMBER 1, 2023

Job Plans standardize the steps involved in completing a maintenance task or repair. Credit: ​​Nicholas Russo, EAM GIS Analyst, Symetri Such a framework, while undeniably beneficial, also requires a significant initial investment in creating standards and ensuring their quality.

Project Management 130

Project Management Building Information Modeling (BIM) Project Management Consulting Risk Management 130

Civil + Structural Engineer

OCTOBER 2, 2023

Data requirements must be standard across the entire lifecycle. If we move data definitions further up the lifecycle and define what is needed through each phase, we can ensure that the right data is captured as projects progress. The data also needs to be captured and maintained.

Stakeholder Engagement 130

Stakeholder Engagement Structural Systems Building Performance Measurement Foundation Systems 130

Autodesk Construction Cloud

JULY 5, 2021

Collaboration can be a powerful thing, but it produces far more successful outcomes when team members operate under agreed-upon standards. How data standards are created and implemented . The challenge when teams leverage conflicting data standards . The future of common data standards.

Collaboration 52

Collaboration Building Information Modeling (BIM) Building Standards Communication 52

CCR Magazine

MARCH 20, 2024

The Anchors Ensure the Safety and Stability of Portable Temporary Structures Many industries utilize portable, modular, or temporary structures or buildings due to the speed, flexibility, and cost-effectiveness advantages offered by this approach over permanent facilities.

Structural Systems 52

Structural Systems Building Codes Safety Regulations Foundation Systems 52

UK Construction Blog

JUNE 18, 2024

The frequency of lift servicing is dependent on a number of different factors such as: The Make and Type of Lift The Age of the Lift Usage pattern – Lifts in places such as public buildings, shopping centres and hotels that experience high levels of traffic, will need more regular inspections than those located in say residential properties.

Lifts 62

Lifts Heavy Lifting Transportation Land Use Regulations Safety Regulations 62

Building Information Management

MAY 16, 2012

Duties of buildingSMART include the development and maintenance of international standards for “openBIM”: buildingSMART Processes. Building Information Model: Is the DIGITAL REPRESENTATION of physical and functional characteristics of a facility. buildingSMART Data Dictionary. buildingSMART Data model. What is BIM?

Building Information Modeling (BIM) 40

Building Information Modeling (BIM) Building Standards Stakeholder Engagement Building Controls 40