Construction Specifier

JUNE 3, 2024

Curing problems—High moisture levels can interfere with the chemical curing process of resinous materials, leading to a tacky or soft finish. Polished concrete Efflorescence—Moisture moving through the concrete and carrying salts to the surface creates a white, powdery residue. diameter circle.

Flooring Systems 108

Flooring Systems Building Materials Manufacturing Concrete Pouring Controls Manufacturing 108

CivilJungle

JANUARY 29, 2022

What Is Cast-In-Situ Concrete? Cast-in-situ concrete is prepared, placed, and finished on the construction site. Another name of cast-in-situ concrete is poured-in-place concrete. Generally, concrete slabs, concrete foundations , beam, column, wall, roof, etc., What Is Cast in Place Concrete?

Concrete Pouring 52

Concrete Pouring Foundation Systems Wall Systems Curing 52

UK Construction Blog

MAY 12, 2024

However, traditional basement finishing methods often need to pay more attention to a critical first step – installing proper structural support. Bench footing refers to a continuous concrete footing installed around the perimeter of a basement. It provides a sturdy foundation for framing basement walls and finishing the space.

Concrete Pouring 52

Concrete Pouring Building Permits Piping Installation Wall Systems 52

CivilJungle

FEBRUARY 12, 2021

Concrete Release Agent: Releasing agents are coatings added to the surface of the formwork prior to concreting , in order to allow quick removal of formwork or shuttering. If the appearance of the concrete surface is relevant, it is important to take care of the finishing surface of the shutter. Spray may be added.

Concrete Pouring 52

Concrete Pouring Painting/finishing Wall Systems Building Materials Manufacturing 52

GCP Applied Technologies

MARCH 3, 2020

Ready mix concrete life cycle. Concrete producers can leverage advanced concrete admixtures , predictive analytics tools, and more to improve efficiency, from materials management to batching to concrete delivery. Concrete mix design. Concrete admixtures help to enable the use of these alternate pozzolans … more.

Concrete Pouring 78

Concrete Pouring Wall Systems Quality Control Fire Protection System Installation 78

Work Gearz

OCTOBER 16, 2020

Water is needed in the mixing the cement and binding them together to form concrete floors or walls of buildings. . And when water interferes with cement work in the form of heavy pouring rain, things can go worse than good! How long does concrete need to dry before it rains? And it might take up to a week’s time to cure.

Concrete Pouring 52

Concrete Pouring Curing Flooring Systems Painting/finishing 52

CCR Magazine

JANUARY 29, 2024

And improved curing techniques create very hard, resilient finishes. Enhanced Aesthetic Appeal While early eco-products were limited in look and style, modern options like quartz epoxy, decorative cork, and digitally printed, sustainable concrete offer visual pop and customization. Polished concrete minimizes processing energy.

Environmental Impact Assessment 52

Environmental Impact Assessment Building Materials Manufacturing Energy Conservation Concrete Pouring 52

CivilJungle

DECEMBER 24, 2020

The concrete slab is a horizontal surface of a residential building or commercial building, factories, flat, etc. Sometimes in a domestic or commercial building, a thick concrete slab is constructed directly to the subsoil. Sometimes in a domestic or commercial building, a thick concrete slab is constructed directly to the subsoil.

Prefabrication 52

Prefabrication Concrete Pouring Steel Fabrication Building Design 52

Specification Product Update

JUNE 7, 2023

The REGUPOL barrier is a ready-for-use, one part, water-based, low VOC liquid that acts as an effective damp proof membrane for suppressing residual construction moisture and rising damp in cementitious floors including power floated concrete and sand/cement screeds. moisture content in sand/cement screed and 6% moisture content in concrete.

Flooring Systems 52

Flooring Systems Concrete Pouring Ceiling Systems Curing 52

Specification Product Update

APRIL 27, 2023

The REGUPOL barrier is a ready-for-use, one part, water-based, low VOC liquid that acts as an effective damp proof membrane for suppressing residual construction moisture and rising damp in cementitious floors including power floated concrete and sand/cement screeds. moisture content in sand/cement screed and 6% moisture content in concrete.

Flooring Systems 52

Flooring Systems Concrete Pouring Ceiling Systems Curing 52

CivilJungle

MAY 29, 2021

Introduction of Concrete Screed. A construction element which is available in a range of thickness to bring forth the installation surface of the concrete flooring to a considerable height & to produce a surface suitable for installing the desired flooring is called a concrete screed. What Is Concrete Screed?

Concrete Pouring 52

Concrete Pouring Flooring Systems Piping Installation Curing 52

GCP Applied Technologies

NOVEMBER 2, 2020

Controlling concrete setting times. Find tips on methods and concrete admixtures that can help contractors control concrete setting times. Concrete chemistry is complicated, and the makeup of the mix can impact its behavior – from its workability to the set times. As concrete temperatures increase, concrete sets faster.

Concrete Pouring 144

Concrete Pouring Building Controls Building Materials Curing 144

CivilJungle

JULY 18, 2022

If there are no exposed roots then by digging the soil we have to expose the roots after doing holes on these roots and pouring boiling water on them. After pouring the boiling water into the holes, the heat of the boiling water soaked the trees. First, we have to make some holes in the exposed roots. How to Kill a Tree Stump?

Concrete Pouring 52

Concrete Pouring Painting/finishing Foundation Systems Piping Installation 52

GCP Applied Technologies

MAY 28, 2018

Waterproof concrete: Is it enough for protecting foundations? Usually the amount of water used in concrete is much more than is required to hydrate the cement. This excess water takes up space in the concrete, forming a network of capillary voids. Creating waterproof concrete. When to use waterproof concrete.

Waterproofing Systems 113

Waterproofing Systems Concrete Pouring Structural Systems Wall Systems 113

CivilJungle

NOVEMBER 1, 2020

How Is Concrete Made. Concrete is a composite material composed of fine and coarse aggregat e bonded together with a fluid cement ( cement paste ) that hardens (cures) over time. When aggregate is mixed with dry cement and water , the mixture forms a fluid slurry that is easily poured and moulded into shape.

Concrete Pouring 98

Concrete Pouring Building Materials Manufacturing Building Materials Curing 98

CivilJungle

MARCH 13, 2021

Mass Concrete: Large bridge piers , foundations , and such as dams like the massive structure , the mass concreting technique is used. For also, mass concrete strength , economy, uniformity, and other factors considered should take into account. The temperature shrinkage is the major problem in mass concrete work.

Concrete Pouring 52

Concrete Pouring Curing Foundation Systems Structural Systems 52

GCP Applied Technologies

MAY 28, 2018

Waterproof concrete: Is it enough for protecting foundations? Usually the amount of water used in concrete is much more than is required to hydrate the cement. This excess water takes up space in the concrete, forming a network of capillary voids. Creating waterproof concrete. When to use waterproof concrete.

Waterproofing Systems 104

Waterproofing Systems Concrete Pouring Structural Systems Wall Systems 104

CivilJungle

MARCH 20, 2021

Varnishes are very much translucent substances that had a safe surface layer in almost the same manner that paints do. At about the same period, they cause the actual layer to be viewed, and then apply a shiny as well as glossy finish. Essentially, these varnishes have the very same ingredients as paints. Thicker finishing.

Painting/finishing 59

Painting/finishing Historic Preservation Concrete Pouring Staircases 59

Levelset

OCTOBER 18, 2022

Concrete alternatives. Concrete is the second-most widely used substance on the planet, surpassed only by water. While it’s a reliable and relatively affordable building material, concrete (and its production) is responsible for around 8% of global emissions. Straw bales.

Building Materials 52

Building Materials Concrete Pouring Building Materials Manufacturing Curing 52

CivilJungle

APRIL 9, 2023

Pavers, often known as paving stones, are flat building components typically used for outdoor flooring and can be fashioned from stone, brick, or concrete. Brick pavers are great alternatives to concrete since they come in a wide variety of textures, characters, and colors and may be set in a wide variety of designs and color combinations.

Concrete Pouring 52

Concrete Pouring Building Materials Manufacturing Building Materials Building Design 52

Construction Specifier

MARCH 5, 2022

Most resilient commercial flooring product designs install over a concrete slab subfloor. Newly poured concrete slabs often take weeks or months to cure, slowly releasing moisture as they dry. This relatively simple test involves sealing a small dish of calcium chloride on a clean section of concrete under a plastic dome.

Concrete Pouring 52

Concrete Pouring Flooring Systems Building Resilience Building Standards 52

GCP Applied Technologies

FEBRUARY 19, 2018

ASTM F710: Preparing the Concrete Floor. Why prepare the concrete slab? But just as important as these—and often overlooked—is careful preparation of the concrete slab. But just as important as these—and often overlooked—is careful preparation of the concrete slab. What constitutes a good concrete slab prep?

Concrete Pouring 97

Concrete Pouring Building Materials Manufacturing Flooring Systems Building Performance Measurement 97

GCP Applied Technologies

NOVEMBER 2, 2020

Controlling concrete setting times. Find tips on methods and concrete admixtures that can help contractors control concrete setting times. Concrete chemistry is complicated, and the makeup of the mix can impact its behavior – from its workability to the set times. As concrete temperatures increase, concrete sets faster.

Concrete Pouring 78

Concrete Pouring Building Controls Building Materials Curing 78

GCP Applied Technologies

JUNE 7, 2018

Water is under pressure below ground and forces its way through even the smallest cracks in the concrete. Concrete is also susceptible to damage in coastal areas. When concrete is directly or indirectly exposed to seawater, it can deteriorate due to sulphate attack and chloride-induced corrosion. Waterproof concrete.

Waterproofing Systems 103

Waterproofing Systems Concrete Pouring Structural Systems Foundation Systems 103

CivilJungle

FEBRUARY 21, 2021

To provide a high-performance, smooth, and durable surface that can last several years and withstand heavy loads, epoxy coatings are typically applied over concrete floors. Strong bonds from base materials like wood, concrete, and steel are created. Step 2: Epoxy can not bind to concrete that is sealed or polished.

Flooring Systems 52

Flooring Systems Concrete Pouring Building Materials Manufacturing Curing 52

Autodesk Construction Cloud

JANUARY 10, 2023

Builders are now exploring sustainable construction materials to replace things like concrete, which is a major source of emissions. Bendable Concrete Also known as Engineered Cementitious Composite (ECC) , bendable concrete is a type of concrete that can withstand bending. Bendable concrete is also more sustainable.

Building Materials 52

Building Materials Sustainability Building Materials Manufacturing Concrete Pouring 52

CivilJungle

DECEMBER 14, 2020

Introduction of Concrete Finishing. Concrete is a versatile building material which is widely used in the construction industry. Concrete is a mixture of cement , coarse aggregate , fine aggregate and water in the appropriate proportion. The finishing of the top surface of the concrete layer can be done in several ways.

Painting/finishing 52

Painting/finishing Concrete Pouring Curing Building Materials 52

GCP Applied Technologies

FEBRUARY 19, 2018

ASTM F710: Preparing the Concrete Floor. Why prepare the concrete slab? But just as important as these—and often overlooked—is careful preparation of the concrete slab. But just as important as these—and often overlooked—is careful preparation of the concrete slab. What constitutes a good concrete slab prep?

Concrete Pouring 60

Concrete Pouring Building Materials Manufacturing Flooring Systems Building Performance Measurement 60

CivilJungle

DECEMBER 25, 2021

By discrepancy, poured concrete driveways must cure for seven days before being used. As mentioned before, blacktop costs are lower than regular asphalt concrete because blacktop uses lower bitumen in the blend. Concrete Driveway. Pervious pavement is made of either pervious asphalt or pervious concrete.

Concrete Pouring 98

Concrete Pouring Structural Systems Painting/finishing Energy Conservation 98

CivilJungle

JANUARY 29, 2022

From the foundation of the building to finishing work of building , cement is used. Cement has been used in many works such as concrete in foundation , mortar in brick masonry , mortar in plaster , bedding in flooring. The curing period of OPC is less than PPC and curing costs reduced. 10 Signs of Bad Concrete Pour.

Concrete Pouring 52

Concrete Pouring Curing Masonry Cost Control 52

CivilJungle

JUNE 26, 2021

Curb and Gutter are the structures that are made from concrete or asphalt which is used to collect the surface runoff water from parking lots or impervious surfaces. Barrier curbs and gutter are generally made up of cement concrete and asphalt aggregates. The concrete mix should be laid and compacted properly.

Concrete Pouring 52

Concrete Pouring Wall Systems Structural Systems Lean Construction 52

CivilJungle

NOVEMBER 17, 2020

A concrete pedestal is a compression element provided to carry the loads from supported elements like columns, statues etc. The shuttering of footing, pedestal and column are to be fixed consecutively and precautions are to be taken so that there is a gap between, resulting into leakage of concrete. Functions of Pedestal.

Concrete Pouring 52

Concrete Pouring Building Materials Manufacturing Curing Heavy Equipment Manufacturing 52

CivilJungle

MARCH 17, 2021

The Concrete positioning and mixing in a cooler environment results in a contraction of the mixture. This concrete contraction can result in internal tension. Unless the basement walls are made of concrete , every gaps found in it must be cleared by means of a paint sealer. What Is Frost Wall?

Wall Systems 52

Wall Systems Foundation Systems Structural Systems Concrete Pouring 52

CivilJungle

APRIL 26, 2020

What Is Concrete? Concrete is the final product resulting from mixing cement , aggregates (including sand), water, and mixtures. The first use of concrete was by the Roman Empire. The Pantheon is the largest unreinforced concrete dome in the world, built-in 120 A.D. Different Types of Concrete. Dry lean Concrete.

Concrete Pouring 64

Concrete Pouring Steel Fabrication Building Materials Manufacturing Structural Systems 64

The Korte Company

OCTOBER 3, 2018

Tilt-Up construction combines the strength and durability of reinforced concrete with the precision and efficiency of the Design-Build methodology. Tilt-Up construction features series of concrete panels tilted up into place to form a building’s exterior wall. Next, concrete is poured into the forms and finished.

Concrete Pouring 61

Concrete Pouring Energy Efficiency Building Products Distribution Building Materials 61

CivilJungle

MAY 1, 2021

That is used in concrete mixtures , fly ash increases the strength and isolation of the concrete and makes pumping smoother. Also, Read: 10 Difference Between Mortar and Concrete | What Is Mortar & Concrete | Types of Mortar & Concrete. Fly Ash in Concrete. Benefits of Fly Ash Concrete.

Concrete Pouring 52

Concrete Pouring Building Materials Manufacturing Building Materials Cost Control 52

CivilJungle

NOVEMBER 19, 2020

In building construction, the first stage is earth excavation , which is then followed by dewatering the trenches, laying of brick flat sloping and PCC layer, placing of reinforcement caging for the construction of footings, and finally the Concreting of foundations. Pour Grade is a two component Polysulphide sealant.

Building Materials Manufacturing 52

Building Materials Manufacturing Waterproofing Systems Concrete Pouring Building Materials 52