GCP Applied Technologies

JUNE 7, 2018

Waterproofing Membranes for Below Grade Structures. Waterproofing Membranes for Below Grade Structures. Waterproofing Below Grade Structures. Water is under pressure below ground and forces its way through even the smallest cracks in the concrete. Concrete is also susceptible to damage in coastal areas.

Waterproofing Systems 103

Waterproofing Systems Concrete Pouring Structural Systems Foundation Systems 103

GCP Applied Technologies

MARCH 3, 2020

Ready mix concrete life cycle. Concrete producers can leverage advanced concrete admixtures , predictive analytics tools, and more to improve efficiency, from materials management to batching to concrete delivery. Concrete mix design. Concrete admixtures help to enable the use of these alternate pozzolans … more.

Concrete Pouring 78

Concrete Pouring Wall Systems Quality Control Fire Protection System Installation 78

CivilJungle

MAY 24, 2021

What Is Concrete Topping? A Concrete topping is a process of laying out a layer of high strength concrete on the old worn-out layer of the concrete. It is nothing but placing a layer of concrete over the existing slab in order to give a finished floor surface on the old layer of concrete. 25 to 50 mm ).

Concrete Pouring 84

Concrete Pouring Flooring Systems Curing Plumbing Systems 84

CivilJungle

JANUARY 29, 2022

What Is Cast-In-Situ Concrete? Cast-in-situ concrete is prepared, placed, and finished on the construction site. Another name of cast-in-situ concrete is poured-in-place concrete. Generally, concrete slabs, concrete foundations , beam, column, wall, roof, etc., Definition of Cast in Place Concrete.

Concrete Pouring 52

Concrete Pouring Foundation Systems Wall Systems Curing 52

GCP Applied Technologies

FEBRUARY 12, 2018

Cold Weather Concreting Practices. Building in the wintertime can involve special considerations, particularly when it comes to pouring concrete in cold weather. It’s imperative that the concrete is protected from freezing until it has attained a compressive strength of at least 500 psi (3.5 Cover the concrete.

Concrete Pouring 60

Concrete Pouring Curing Piping Installation Building Controls 60

Civil + Structural Engineer

DECEMBER 1, 2023

The season of celebration and joyous reunion will soon be upon us, and Civil+Structural Engineer Magazine is proud to kickstart the season of celebration by announcing our 2023 Yearbook of Engineering Achievement. million square feet of concrete and asphalt pavement Sunport Boulevard Extension | Bohannan Huston, Inc.

Engineering 130

Engineering Fire Protection System Installation Fire Protection Systems Environmental Consulting 130

CivilJungle

OCTOBER 5, 2022

What Is Transportation of Concrete? Transportation of concrete is a process where we move freshly prepared concrete from one place to another place. Generally, we move concrete to that place where that concrete need to be dumped for structural construction purpose. Methods for Transportation of Concrete.

Concrete Pouring 52

Concrete Pouring Curing Roofing Systems Flooring Systems 52

UK Construction Blog

OCTOBER 18, 2023

The post Reinforced Concrete: Strength and Durability for Modern Construction appeared first on UK Construction Blog. Reinforced concrete is a widely used construction material that combines the strengths of two components: concrete and steel reinforcement. In 1854, William B.

Concrete Pouring 64

Concrete Pouring Building Materials Manufacturing Building Materials Building Products Distribution 64

CivilJungle

DECEMBER 28, 2020

Reinforced Concrete Frame. The reinforced concrete frame is a superstructure combined with horizontal components , i.e. c olumns and vertical components, i.e. beams. Sometimes this concrete frame is also called as a skeleton of this entire structure. Concrete frames are mainly two types, those are-. Cast in situ.

Concrete Pouring 52

Concrete Pouring Foundation Systems Structural Systems Wall Systems 52

Specification Product Update

JUNE 28, 2024

Delta Registered Installers, Structureseal Services Limited, were appointed to provide a guaranteed, cost-effective scheme that would comply with BS 8102:2022 (Protection of below ground structures against water ingress. Phase 2 – to install a secondary waterproofing system, such as the Delta Type C, Cavity Drainage System.

Waterproofing Systems 52

Waterproofing Systems Structural Systems Concrete Pouring Wall Systems 52

CivilJungle

MARCH 13, 2021

Mass Concrete: Large bridge piers , foundations , and such as dams like the massive structure , the mass concreting technique is used. For also, mass concrete strength , economy, uniformity, and other factors considered should take into account. The temperature shrinkage is the major problem in mass concrete work.

Concrete Pouring 52

Concrete Pouring Curing Foundation Systems Structural Systems 52

CCR Magazine

OCTOBER 7, 2024

Building such an immense structure posed several unique challenges that almost no other building project anywhere on the planet has encountered. This concept, which underwent extensive testing in wind tunnels, was proven to break wind vortices that could otherwise place structural stress on the building.

Engineering 52

Engineering Concrete Pouring Foundation Systems Geotechnical Engineering 52

CivilJungle

MARCH 16, 2021

What Is Lightweight Concrete? Lightweight concrete can be defined as a type of concrete which includes an expanding agent in that it increases the volume of the mixture while giving additional qualities such as nailbility and lessened the dead weight. How much does Concrete Weigh? 10 pounds per cubic meter.

Concrete Pouring 52

Concrete Pouring Fire Protection System Installation Curing Fire Protection Systems 52

CivilJungle

FEBRUARY 6, 2021

The word Monolithic means “all in a single pour” so in construction where Monolithic Slab is used the foundation is made in one single pour that is made up of a layer of a concrete slab with thicker area under the load-bearing walls and all the edges of the perimeter to replace the footer. What Is a Monolithic Slab?

Concrete Pouring 52

Concrete Pouring Foundation Systems Wall Systems Flooring Systems 52

UK Construction Blog

JUNE 6, 2023

Ever wondered how concrete structures maintain their shape and strength during construction? As we dive into the various types of shuttering materials and techniques, prepare to be amazed by the innovative systems that enable complex and unique structures to come to life.

Steel Fabrication 52

Steel Fabrication Structural Systems Wall Systems Concrete Pouring 52

CivilJungle

MARCH 16, 2021

Introduction to Refractory Concrete: The Innovation in the construction material is increasing day by day. There are various types of concrete are manufactured for various purposes in the construction Industry. The normal concrete cannot withstand at a high temperature and it may disintegrate and collapsed.

Concrete Pouring 52

Concrete Pouring Curing Building Materials Manufacturing Structural Systems 52

UK Construction Blog

JANUARY 20, 2025

The post Precast Concrete Detailing: Key Considerations for Fabricators and Contractors appeared first on UK Construction Blog. Precast concrete detailing is like the unsung hero in construction. Quality control is another biggiemess it up, and you risk the whole structure. In the world of construction, precision is everything.

Building Information Modeling (BIM) 52

Building Information Modeling (BIM) Steel Fabrication Concrete Pouring Quality Control 52

CivilJungle

DECEMBER 25, 2021

By discrepancy, poured concrete driveways must cure for seven days before being used. The mid-layer provides structure, and the top subcaste is a pattern-resistant face that gives the asphalt its continuity. Hot mix asphalt refers to the operating system rather than the type of asphalt. What Is Asphalt Driveway ?

Concrete Pouring 98

Concrete Pouring Painting/finishing Structural Systems Energy Conservation 98

CivilJungle

APRIL 22, 2022

What to Do If the Concrete Cube Fails After 28 Days? So, What To Do If Concrete Cube Falls after 24 days? There are many record and recovery choices if the concrete cell falls in the Test. There are many record and recovery choices if the concrete cell falls in the Test. Cube Test of Concrete.

Concrete Pouring 52

Concrete Pouring Curing Structural Systems Staircases 52

UK Construction Blog

MAY 12, 2024

However, traditional basement finishing methods often need to pay more attention to a critical first step – installing proper structural support. Bench footing refers to a continuous concrete footing installed around the perimeter of a basement. This is where bench footing comes in.

Concrete Pouring 52

Concrete Pouring Building Permits Building Code Compliance Piping Installation 52

CCR Magazine

DECEMBER 10, 2024

Epoxy floor coatings present a robust solution, offering strength up to three times greater than standard concrete. The coating’s exceptional bond to concrete substrates ensures it remains intact for years, even in challenging environments. Epoxy’s non-porous surface repels liquids, preventing absorption and staining.

Flooring Systems 52

Flooring Systems Heavy Equipment Manufacturing Concrete Pouring Curing 52

CivilJungle

APRIL 26, 2020

What Is Concrete? Concrete is the final product resulting from mixing cement , aggregates (including sand), water, and mixtures. The first use of concrete was by the Roman Empire. The Pantheon is the largest unreinforced concrete dome in the world, built-in 120 A.D. Different Types of Concrete. Dry lean Concrete.

Concrete Pouring 64

Concrete Pouring Steel Fabrication Building Materials Manufacturing Structural Systems 64

The Korte Company

OCTOBER 3, 2018

Tilt-Up construction combines the strength and durability of reinforced concrete with the precision and efficiency of the Design-Build methodology. Tilt-Up construction features series of concrete panels tilted up into place to form a building’s exterior wall. Next, concrete is poured into the forms and finished.

Concrete Pouring 61

Concrete Pouring Building Products Distribution Energy Efficiency Building Materials 61

Construction Specifier

JUNE 20, 2024

1 The only exception noted in the code is for a coal tar based roof system. Before discussing the design of the roof assembly with either structural slope or tapered insulation , the type of actual roof drainage mechanisms will be discussed. Conversion factors are provided for International System of Units (SI). Section 1105.2

Roofing Systems 59

Roofing Systems Piping Installation Concrete Pouring Wall Systems 59

CivilJungle

FEBRUARY 12, 2021

Concrete Release Agent: Releasing agents are coatings added to the surface of the formwork prior to concreting , in order to allow quick removal of formwork or shuttering. If the appearance of the concrete surface is relevant, it is important to take care of the finishing surface of the shutter. Spray may be added.

Concrete Pouring 52

Concrete Pouring Painting/finishing Wall Systems Building Materials Manufacturing 52

CivilJungle

FEBRUARY 5, 2022

In this article, we will discuss all about the concrete masonry units. The CMU wall is constructed with the help of standard sizes concrete masonry units. A concrete masonry unit (CMU)is a versatile and environment-friendly building unit that is available in a variety of shapes and sizes in the market. Concrete Bricks.

Masonry 52

Masonry Concrete Pouring Wall Systems Building Materials Manufacturing 52

CivilJungle

MARCH 14, 2021

The spread footing is utilized to support the column & walls and additionally to convey & disseminate the load coming to the structure to the soil below it. The spread footings are constructed with concrete & steel and, because of their design, they’re less likely to fail than other spot footers. Combined Footing.

Foundation Systems 52

Foundation Systems Concrete Pouring Wall Systems Structural Systems 52

CivilJungle

FEBRUARY 10, 2021

When to Remove Concrete Forms ? Concrete forms are steel or aluminum mould in which concrete is poured to manufacture many structures like columns , slabs , beams , and many other types of cement structures. The forms can be removed after when the concrete is properly hardened in to the mould.

Concrete Pouring 52

Concrete Pouring Wall Systems Foundation Systems Curing 52

CivilJungle

MAY 29, 2021

Introduction of Concrete Screed. A construction element which is available in a range of thickness to bring forth the installation surface of the concrete flooring to a considerable height & to produce a surface suitable for installing the desired flooring is called a concrete screed. What Is Concrete Screed?

Concrete Pouring 52

Concrete Pouring Flooring Systems Piping Installation Curing 52

CivilJungle

FEBRUARY 21, 2021

Formwork is the mould used during the building to give the desired structural form by pressing concrete into the mould. In a single term, formwork is a mould that cast concrete in various shapes and sizes. Designers will also have to extract the shape until the concrete has achieved the required power. What Is Formwork?

Concrete Pouring 52

Concrete Pouring Steel Fabrication Building Materials Manufacturing Building Materials 52

Construction Specifier

JUNE 20, 2024

1 The only exception noted in the code is for a coal tar based roof system. Before discussing the design of the roof assembly with either structural slope or tapered insulation , the type of actual roof drainage mechanisms will be discussed. Conversion factors are provided for International System of Units (SI). Section 1105.2

Roofing Systems 52

Roofing Systems Piping Installation Concrete Pouring Wall Systems 52

CivilJungle

MARCH 13, 2021

New technologies involve Shotcrete used for the new Austrian tunnelling system, by use of a tunnel boring machine (TBM) or even a tunnelling shield. Also, Read: What Is Folded Plate | Folded Plate Structure | Folded Plate Roof Construction Details | Folded Plate Staircase | What Are Folded Plate Roofs. Polycentric.

Roofing Systems 52

Roofing Systems Structural Systems Concrete Pouring Curing 52

CivilJungle

FEBRUARY 16, 2021

Its use of concrete blocks for masonry construction has indeed been quickly established which are higher than conventional construction materials such as bricks and stones. Concrete blocks with a trading name such as siporex are available on the light-colored market. Hollow Concrete Block Size: 0.40 m : hollow tiles.

Building Materials Manufacturing 52

Building Materials Manufacturing Concrete Pouring Wall Systems Curing 52

CivilJungle

MARCH 17, 2021

The Frost wall or frost-protected wall structure is built to keep soil below the building against freezing to secure the foundations in freezing conditions. Any damage to the structural foundation would have an effect on the overall integrity of the construction. This concrete contraction can result in internal tension.

Wall Systems 52

Wall Systems Foundation Systems Structural Systems Concrete Pouring 52

CivilJungle

NOVEMBER 19, 2020

In building construction, the first stage is earth excavation , which is then followed by dewatering the trenches, laying of brick flat sloping and PCC layer, placing of reinforcement caging for the construction of footings, and finally the Concreting of foundations. Pour Grade is a two component Polysulphide sealant.

Building Materials Manufacturing 52

Building Materials Manufacturing Waterproofing Systems Concrete Pouring Building Materials 52

CivilJungle

MAY 1, 2021

That is used in concrete mixtures , fly ash increases the strength and isolation of the concrete and makes pumping smoother. Also, Read: 10 Difference Between Mortar and Concrete | What Is Mortar & Concrete | Types of Mortar & Concrete. Fly Ash in Concrete. Benefits of Fly Ash Concrete.

Concrete Pouring 52

Concrete Pouring Building Materials Manufacturing Building Materials Cost Control 52

Construction Specifier

JANUARY 13, 2025

LEED AP, Vivian Volz, CSI, AIA, LEED AP, SCIP Photo courtesy Tao Group Solutions After years of grappling with client callbacks, legal disputes, and financial losses from poor polished concrete installations, the industry has reached a breaking point: prohibit polished concrete.

Concrete Pouring 105

Concrete Pouring Building Performance Measurement Flooring Systems Painting/finishing 105