GCP Applied Technologies

MARCH 3, 2020

Ready mix concrete life cycle. Concrete producers can leverage advanced concrete admixtures , predictive analytics tools, and more to improve efficiency, from materials management to batching to concrete delivery. Concrete mix design. Concrete admixtures help to enable the use of these alternate pozzolans … more.

Concrete Pouring 78

Concrete Pouring Wall Systems Quality Control Fire Protection System Installation 78

CivilJungle

JANUARY 29, 2022

What Is Cast-In-Situ Concrete? Cast-in-situ concrete is prepared, placed, and finished on the construction site. Another name of cast-in-situ concrete is poured-in-place concrete. Generally, concrete slabs, concrete foundations , beam, column, wall, roof, etc., What Is Cast in Place Concrete?

Concrete Pouring 52

Concrete Pouring Foundation Systems Wall Systems Curing 52

CivilJungle

MAY 24, 2021

What Is Concrete Topping? A Concrete topping is a process of laying out a layer of high strength concrete on the old worn-out layer of the concrete. It is nothing but placing a layer of concrete over the existing slab in order to give a finished floor surface on the old layer of concrete. 25 to 50 mm ).

Concrete Pouring 84

Concrete Pouring Flooring Systems Curing Plumbing Systems 84

Construction Specifier

JUNE 3, 2024

Curing problems—High moisture levels can interfere with the chemical curing process of resinous materials, leading to a tacky or soft finish. Polished concrete Efflorescence—Moisture moving through the concrete and carrying salts to the surface creates a white, powdery residue. diameter circle.

Flooring Systems 108

Flooring Systems Building Materials Manufacturing Concrete Pouring Controls Manufacturing 108

CivilJungle

OCTOBER 5, 2022

What Is Transportation of Concrete? Transportation of concrete is a process where we move freshly prepared concrete from one place to another place. Generally, we move concrete to that place where that concrete need to be dumped for structural construction purpose. Methods for Transportation of Concrete.

Concrete Pouring 52

Concrete Pouring Curing Roofing Systems Flooring Systems 52

Work Gearz

OCTOBER 16, 2020

Water is needed in the mixing the cement and binding them together to form concrete floors or walls of buildings. . And when water interferes with cement work in the form of heavy pouring rain, things can go worse than good! How long does concrete need to dry before it rains? And it might take up to a week’s time to cure.

Concrete Pouring 52

Concrete Pouring Curing Flooring Systems Painting/finishing 52

CivilJungle

FEBRUARY 6, 2021

The word Monolithic means “all in a single pour” so in construction where Monolithic Slab is used the foundation is made in one single pour that is made up of a layer of a concrete slab with thicker area under the load-bearing walls and all the edges of the perimeter to replace the footer. What Is a Monolithic Slab?

Concrete Pouring 52

Concrete Pouring Foundation Systems Wall Systems Flooring Systems 52

CivilJungle

MARCH 16, 2021

What Is Lightweight Concrete? Lightweight concrete can be defined as a type of concrete which includes an expanding agent in that it increases the volume of the mixture while giving additional qualities such as nailbility and lessened the dead weight. How much does Concrete Weigh? 10 pounds per cubic meter.

Concrete Pouring 52

Concrete Pouring Fire Protection System Installation Curing Fire Protection Systems 52

CivilJungle

DECEMBER 28, 2020

Reinforced Concrete Frame. The reinforced concrete frame is a superstructure combined with horizontal components , i.e. c olumns and vertical components, i.e. beams. Sometimes this concrete frame is also called as a skeleton of this entire structure. Concrete frames are mainly two types, those are-. Cast in situ.

Concrete Pouring 52

Concrete Pouring Foundation Systems Structural Systems Wall Systems 52

CivilJungle

FEBRUARY 5, 2022

Introduction of CMU Wall. The CMU blocks are available in various shapes and sizes in the market and are widely used in the construction of walls of the building. In this article, we will discuss all about the concrete masonry units. What is CMU Wall? The Full form of the CMU is Concrete Masonry units. ASTM C1372.

Masonry 52

Masonry Concrete Pouring Wall Systems Building Materials Manufacturing 52

UK Construction Blog

OCTOBER 18, 2023

The post Reinforced Concrete: Strength and Durability for Modern Construction appeared first on UK Construction Blog. Reinforced concrete is a widely used construction material that combines the strengths of two components: concrete and steel reinforcement. In 1854, William B.

Concrete Pouring 62

Concrete Pouring Building Materials Manufacturing Building Materials Building Products Distribution 62

UK Construction Blog

MAY 12, 2024

Bench footing refers to a continuous concrete footing installed around the perimeter of a basement. It provides a sturdy foundation for framing basement walls and finishing the space. Bench footing is a foundation used to support walls in a basement when converting the space into a living area. What is Bench Footing?

Concrete Pouring 52

Concrete Pouring Building Permits Building Code Compliance Wall Systems 52

Specification Product Update

JUNE 28, 2024

Where a combination of waterproofing protection is being used, the two systems should offer different performance characteristics to mitigate the risk of failure due to a common cause. Phase 2 – to install a secondary waterproofing system, such as the Delta Type C, Cavity Drainage System.

Waterproofing Systems 52

Waterproofing Systems Structural Systems Concrete Pouring Wall Systems 52

Civil + Structural Engineer

DECEMBER 1, 2023

It features elements that maximize the safety, security, and efficiency of the travel process including 100 percent automated screening lanes, 100 percent facial recognition “e-gates” for international departure, an innovative landside terminal design, and 100 percent trackable RFID Independent Carrier System.

Engineering 130

Engineering Fire Protection System Installation Fire Protection Systems Environmental Consulting 130

CivilJungle

FEBRUARY 16, 2021

Its use of concrete blocks for masonry construction has indeed been quickly established which are higher than conventional construction materials such as bricks and stones. Concrete blocks with a trading name such as siporex are available on the light-colored market. Hollow Concrete Block Size: 0.40 m : hollow tiles.

Building Materials Manufacturing 52

Building Materials Manufacturing Concrete Pouring Wall Systems Curing 52

UK Construction Blog

JUNE 6, 2023

Ever wondered how concrete structures maintain their shape and strength during construction? As we dive into the various types of shuttering materials and techniques, prepare to be amazed by the innovative systems that enable complex and unique structures to come to life.

Steel Fabrication 52

Steel Fabrication Structural Systems Wall Systems Concrete Pouring 52

CivilJungle

FEBRUARY 12, 2021

Concrete Release Agent: Releasing agents are coatings added to the surface of the formwork prior to concreting , in order to allow quick removal of formwork or shuttering. If the appearance of the concrete surface is relevant, it is important to take care of the finishing surface of the shutter. Spray may be added.

Concrete Pouring 52

Concrete Pouring Painting/finishing Wall Systems Building Materials Manufacturing 52

Specification Product Update

JUNE 7, 2023

The REGUPOL barrier is a ready-for-use, one part, water-based, low VOC liquid that acts as an effective damp proof membrane for suppressing residual construction moisture and rising damp in cementitious floors including power floated concrete and sand/cement screeds. moisture content in sand/cement screed and 6% moisture content in concrete.

Flooring Systems 52

Flooring Systems Concrete Pouring Curing Ceiling Systems 52

Specification Product Update

APRIL 27, 2023

The REGUPOL barrier is a ready-for-use, one part, water-based, low VOC liquid that acts as an effective damp proof membrane for suppressing residual construction moisture and rising damp in cementitious floors including power floated concrete and sand/cement screeds. moisture content in sand/cement screed and 6% moisture content in concrete.

Flooring Systems 52

Flooring Systems Concrete Pouring Curing Ceiling Systems 52

CivilJungle

FEBRUARY 10, 2021

When to Remove Concrete Forms ? Concrete forms are steel or aluminum mould in which concrete is poured to manufacture many structures like columns , slabs , beams , and many other types of cement structures. The forms can be removed after when the concrete is properly hardened in to the mould.

Concrete Pouring 52

Concrete Pouring Wall Systems Foundation Systems Curing 52

The Korte Company

OCTOBER 3, 2018

Tilt-Up construction combines the strength and durability of reinforced concrete with the precision and efficiency of the Design-Build methodology. Tilt-Up construction features series of concrete panels tilted up into place to form a building’s exterior wall. Next, concrete is poured into the forms and finished.

Concrete Pouring 61

Concrete Pouring Building Products Distribution Energy Efficiency Building Materials 61

CivilJungle

MARCH 13, 2021

Mass Concrete: Large bridge piers , foundations , and such as dams like the massive structure , the mass concreting technique is used. For also, mass concrete strength , economy, uniformity, and other factors considered should take into account. The temperature shrinkage is the major problem in mass concrete work.

Concrete Pouring 52

Concrete Pouring Curing Foundation Systems Structural Systems 52

CivilJungle

MARCH 17, 2021

What Is Frost Wall? The Frost wall or frost-protected wall structure is built to keep soil below the building against freezing to secure the foundations in freezing conditions. The Types of frost walls, their specifications, and applications are addressed. This concrete contraction can result in internal tension.

Wall Systems 52

Wall Systems Foundation Systems Structural Systems Concrete Pouring 52

CivilJungle

FEBRUARY 21, 2021

To provide a high-performance, smooth, and durable surface that can last several years and withstand heavy loads, epoxy coatings are typically applied over concrete floors. It is one of the resinous flooring systems that render flooring seamless. Strong bonds from base materials like wood, concrete, and steel are created.

Flooring Systems 52

Flooring Systems Concrete Pouring Curing Building Materials Manufacturing 52

CivilJungle

DECEMBER 25, 2021

Also, read: How to Load Calculation on Column, Beam, Wall & Slab. By discrepancy, poured concrete driveways must cure for seven days before being used. Hot mix asphalt refers to the operating system rather than the type of asphalt. What Is Asphalt Road? What Is Asphalt Driveway ? Hot Mix Asphalt.

Concrete Pouring 98

Concrete Pouring Painting/finishing Structural Systems Energy Conservation 98

Construction Specifier

JUNE 20, 2024

1 The only exception noted in the code is for a coal tar based roof system. Roof drainage systems The basic roof drainage systems consist of: (1) Roof drains connected to interior drainage piping or (2) Roof perimeter edge with or without gutters and downspouts or through-wall scupper openings with or without a downspout.

Roofing Systems 59

Roofing Systems Piping Installation Concrete Pouring Wall Systems 59

CivilJungle

MARCH 14, 2021

The spread footing is utilized to support the column & walls and additionally to convey & disseminate the load coming to the structure to the soil below it. The spread footings are constructed with concrete & steel and, because of their design, they’re less likely to fail than other spot footers. Wall Footing.

Foundation Systems 52

Foundation Systems Concrete Pouring Wall Systems Structural Systems 52

CivilJungle

FEBRUARY 21, 2021

Formwork is the mould used during the building to give the desired structural form by pressing concrete into the mould. In a single term, formwork is a mould that cast concrete in various shapes and sizes. Designers will also have to extract the shape until the concrete has achieved the required power. Plain concrete shape.

Concrete Pouring 52

Concrete Pouring Steel Fabrication Building Materials Manufacturing Building Materials 52

CivilJungle

APRIL 26, 2020

What Is Concrete? Concrete is the final product resulting from mixing cement , aggregates (including sand), water, and mixtures. The first use of concrete was by the Roman Empire. The Pantheon is the largest unreinforced concrete dome in the world, built-in 120 A.D. Different Types of Concrete. Dry lean Concrete.

Concrete Pouring 64

Concrete Pouring Steel Fabrication Building Materials Manufacturing Structural Systems 64

CivilJungle

MAY 29, 2021

Introduction of Concrete Screed. A construction element which is available in a range of thickness to bring forth the installation surface of the concrete flooring to a considerable height & to produce a surface suitable for installing the desired flooring is called a concrete screed. What Is Concrete Screed?

Concrete Pouring 52

Concrete Pouring Flooring Systems Piping Installation Curing 52

Construction Specifier

JUNE 20, 2024

1 The only exception noted in the code is for a coal tar based roof system. Roof drainage systems The basic roof drainage systems consist of: (1) Roof drains connected to interior drainage piping or (2) Roof perimeter edge with or without gutters and downspouts or through-wall scupper openings with or without a downspout.

Roofing Systems 52

Roofing Systems Piping Installation Concrete Pouring Wall Systems 52

CivilJungle

JULY 18, 2022

But sometimes we have to kill the roots because they can destroy our home walls, foundations, floor, etc. Killing tree roots with boiling water is a very effective and easy system compared to the other systems. In this system for killing the trees, we have to follow some steps. Kill Tree Roots with Boiling Water.

Concrete Pouring 52

Concrete Pouring Painting/finishing Foundation Systems Piping Installation 52

CivilJungle

MARCH 13, 2021

New technologies involve Shotcrete used for the new Austrian tunnelling system, by use of a tunnel boring machine (TBM) or even a tunnelling shield. Vertical walls with arch roof type. Tunnels shield the system (railway track, highway, sewage line , oil line, respectively.) Elliptical tunnel. Polycentric.

Roofing Systems 52

Roofing Systems Structural Systems Concrete Pouring Curing 52

CivilJungle

NOVEMBER 19, 2020

In building construction, the first stage is earth excavation , which is then followed by dewatering the trenches, laying of brick flat sloping and PCC layer, placing of reinforcement caging for the construction of footings, and finally the Concreting of foundations. Pour Grade is a two component Polysulphide sealant.

Building Materials Manufacturing 52

Building Materials Manufacturing Waterproofing Systems Concrete Pouring Building Materials 52

CivilJungle

MAY 1, 2021

That is used in concrete mixtures , fly ash increases the strength and isolation of the concrete and makes pumping smoother. Also, Read: 10 Difference Between Mortar and Concrete | What Is Mortar & Concrete | Types of Mortar & Concrete. Fly Ash in Concrete. Benefits of Fly Ash Concrete.

Concrete Pouring 52

Concrete Pouring Building Materials Manufacturing Building Materials Cost Control 52

CivilJungle

JUNE 26, 2021

Curb and Gutter are the structures that are made from concrete or asphalt which is used to collect the surface runoff water from parking lots or impervious surfaces. Wherever possible, eliminate or minimize curb and gutter systems. What Does Parapet Mean | Types of Parapet Wall | Uses of Parapet Wall.

Concrete Pouring 52

Concrete Pouring Wall Systems Structural Systems Lean Construction 52