Remove Concrete Pouring Remove Foundation Systems Remove Geotechnical Engineering
article thumbnail

The Engineering Miracles Behind Burj Khalifa

CCR Magazine

The Burj Khalifa in Dubai is the tallest building in the world and a marvel of modern construction and engineering. Significant engineering problems needed to be addressed to ensure the tower could safely support itself and provide a safe residence for those within.

article thumbnail

Waterproofing Membrane Supports Redevelopment Growth in the United States

GCP Applied Technologies

A geotechnical engineer can provide recommendations that are specific to the particular site. How pre-applied membranes work Pre-applied membranes are laid down before the foundation is poured. The membrane is placed directly against the soil retaining systems. It is critical to comply with the latest regulations.

Insiders

Sign Up for our Newsletter

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

article thumbnail

Waterproofing mass transit systems

GCP Applied Technologies

Waterproofing mass transit systems. Water and moisture intrusion can cause significant damage to mass transit systems, resulting in high replacement costs, lost revenue, and serious disruption in travel. The following examples illustrate how many transit systems are tackling these challenges. Phillip.fry@gc…. April 03, 2018.

article thumbnail

The Start of Celebration: the 2023 Yearbook of Engineering Achievement

Civil + Structural Engineer

The season of celebration and joyous reunion will soon be upon us, and Civil+Structural Engineer Magazine is proud to kickstart the season of celebration by announcing our 2023 Yearbook of Engineering Achievement.

article thumbnail

Deshuttering Time | When to Remove Concrete Forms | Concrete Formwork Removal Time | Earliest Time to Remove Concrete Forms | When To Strip Concrete Forms

CivilJungle

When to Remove Concrete Forms ? Concrete forms are steel or aluminum mould in which concrete is poured to manufacture many structures like columns , slabs , beams , and many other types of cement structures. The forms can be removed after when the concrete is properly hardened in to the mould.

article thumbnail

What Is Formwork | Use of Materials in Formwork | Types of Formwork | Requirements Good of Formwork | Advantages & Disadvantages

CivilJungle

Formwork is the mould used during the building to give the desired structural form by pressing concrete into the mould. In a single term, formwork is a mould that cast concrete in various shapes and sizes. Designers will also have to extract the shape until the concrete has achieved the required power. Plain concrete shape.

article thumbnail

16 Types of Building Components | How a Building Is Constructed | 19 Different Types of Building Construction Phases

CivilJungle

Under every house is a foundation , and under most footing is Bedding for Footing. Also, Read: Difference Between Footing and Foundation | What is Footing and Foundation. #2. Generally, the plinth is built slightly well above the ground floor sometime after the foundation. The substructure are as follows. Brick Wall-.