GCP Applied Technologies

APRIL 3, 2018

Waterproofing mass transit systems. Water and moisture intrusion can cause significant damage to mass transit systems, resulting in high replacement costs, lost revenue, and serious disruption in travel. The following examples illustrate how many transit systems are tackling these challenges. Phillip.fry@gc…. April 03, 2018.

Waterproofing Systems 103

Waterproofing Systems Concrete Pouring Wall Systems Roofing Systems 103

GCP Applied Technologies

MAY 28, 2018

Waterproof concrete: Is it enough for protecting foundations? Although waterproofing systems account for a small fraction of the cost of an overall building project, if the wrong solution is chosen or it’s installed improperly, the costs of remediation can be tremendous. . Creating waterproof concrete. Phillip.fry@gc….

Waterproofing Systems 104

Waterproofing Systems Concrete Pouring Structural Systems Wall Systems 104

CivilJungle

APRIL 10, 2022

What Is Micro Concrete? Micro concrete is a cement-based coating that is used as a thin layer on different surfaces like tiles, wood, etc to give a look and feel of real concrete at less cost. The layer of micro concrete is about 2-3mm thick. How Is It Different from Conventional Concrete? Less Water Demand.

Concrete Pouring 105

Concrete Pouring Flooring Systems Waterproofing Systems Wall Systems 105

GCP Applied Technologies

MARCH 3, 2020

Ready mix concrete life cycle. Concrete producers can leverage advanced concrete admixtures , predictive analytics tools, and more to improve efficiency, from materials management to batching to concrete delivery. Concrete mix design. Concrete admixtures help to enable the use of these alternate pozzolans … more.

Concrete Pouring 78

Concrete Pouring Wall Systems Quality Control Fire Protection System Installation 78

CivilJungle

OCTOBER 18, 2021

Then after architect consult with a structural engineer and MEP engineer for details of the reinforcements and other detail for use, how deep your foundation will be, the size of gravel to be used, column width, electrical, plumbing, etc. Also, read: IS 516:1959 Most Important Point (Method of Tests For Strength of Concrete).

Painting/finishing 98

Painting/finishing Electrical Wiring Installation Plumbing Systems Masonry 98

GCP Applied Technologies

OCTOBER 27, 2023

How pre-applied membranes work Pre-applied membranes are laid down before the foundation is poured. The membrane is placed directly against the soil retaining systems. The concrete is then poured directly onto the membrane. This benefit alone can result in significant cost and time savings for contractors on site.

Waterproofing Systems 78

Waterproofing Systems Concrete Pouring Structural Systems Foundation Systems 78

CivilJungle

JANUARY 29, 2022

What Is Cast-In-Situ Concrete? Cast-in-situ concrete is prepared, placed, and finished on the construction site. Another name of cast-in-situ concrete is poured-in-place concrete. Generally, concrete slabs, concrete foundations , beam, column, wall, roof, etc.,

Concrete Pouring 52

Concrete Pouring Foundation Systems Wall Systems Curing 52

Natural Building

APRIL 16, 2014

To my knowledge, building science has never been approached with such an attitude of precise evaluation of all of the factors that affect the environmental impact of materials and building systems. Simple bar graphs indicate at a glance just how “green” each material or system might be.

Roofing Systems 63

Roofing Systems Wall Systems Foundation Systems Flooring Systems 63

Civil + Structural Engineer

JUNE 10, 2024

At the turn of the century, the company pioneered the use of steel-reinforced concrete to create safer, stronger, and more efficient buildings. The project includes the creation of three large habitats with essentially no straight edges, including a main habitat consisting of 680 cubic yards of concrete and 355 tons of rebar.

Concrete Pouring 100

Concrete Pouring Project Management Consulting Surveying Site Planning 100

The Korte Company

FEBRUARY 17, 2022

Laying the foundation. Gary’s first job out of school was driving a concrete truck for his father’s Highland Ready Mix business. He also poured slabs on the side, learning to set concrete so it doesn’t crack as it dries. After selling out of his concrete company, Gary’s father started the family spec-house business.

Concrete Pouring 98

Concrete Pouring Carpentry Flooring Systems Building Products Distribution 98

CivilJungle

MAY 24, 2021

What Is Concrete Topping? A Concrete topping is a process of laying out a layer of high strength concrete on the old worn-out layer of the concrete. It is nothing but placing a layer of concrete over the existing slab in order to give a finished floor surface on the old layer of concrete. 25 to 50 mm ).

Concrete Pouring 84

Concrete Pouring Flooring Systems Curing Plumbing Systems 84

CivilJungle

FEBRUARY 6, 2021

The word Monolithic means “all in a single pour” so in construction where Monolithic Slab is used the foundation is made in one single pour that is made up of a layer of a concrete slab with thicker area under the load-bearing walls and all the edges of the perimeter to replace the footer. What Is a Floating Slab?

Concrete Pouring 52

Concrete Pouring Foundation Systems Wall Systems Flooring Systems 52

GCP Applied Technologies

OCTOBER 4, 2018

Concrete construction innovations. Control flow concrete construction. Mass pours. One of the latest innovations in concrete construction is the development of an entirely new type of concrete. One of the latest innovations in concrete construction is the development of an entirely new type of concrete.

Concrete Pouring 60

Concrete Pouring Cost Control Building Controls Foundation Systems 60

CivilJungle

FEBRUARY 4, 2021

Both walls , slabs , stairs , along with door and window openings , are cast in place in the Monolithic Method. The lateral and gravity load resistance system in this system consists of reinforced concrete walls and slabs of reinforced concrete. Building monolithic foundations is truly easy.

Concrete Pouring 52

Concrete Pouring Foundation Systems Wall Systems Structural Systems 52

CivilJungle

JANUARY 7, 2021

Shotcrete/mortar/spray-concrete is a kind of refined concrete drizzled by gas hose-pipe nozzle at high pressure & velocity on a projectile motion on a prepared wall surface. It is often utilised in tunnels, underground walls, retaining walls, drainage systems & swimming pools for interim support.

Concrete Pouring 52

Concrete Pouring Fire Protection System Installation Wall Systems Foundation Systems 52

GCP Applied Technologies

MAY 11, 2018

Using control flow concrete for top down construction. This concrete construction method allows for above ground construction work to be carried out at the same time as excavation of the basement, resulting in significant time savings. The construction typically begins with: Execution of diaphragm walls. Control flow concrete.

Concrete Pouring 60

Concrete Pouring Cost Control Quality Control Building Controls 60

GCP Applied Technologies

MAY 11, 2018

Using control flow concrete for top down construction. Commonly used in urban areas, top down construction is often used for high rise buildings with deep basements and for underground structures such as car parks and transit systems. . The construction typically begins with: Execution of diaphragm walls. Control flow concrete.

Concrete Pouring 60

Concrete Pouring Cost Control Quality Control Building Controls 60

Civil + Structural Engineer

DECEMBER 1, 2023

It features elements that maximize the safety, security, and efficiency of the travel process including 100 percent automated screening lanes, 100 percent facial recognition “e-gates” for international departure, an innovative landside terminal design, and 100 percent trackable RFID Independent Carrier System.

Engineering 130

Engineering Fire Protection System Installation Fire Protection Systems Environmental Consulting 130

CivilJungle

MAY 16, 2021

What Is Foundation Repair? Foundation renovation is required when the foundation of a home, building , or structure is impaired & the core structure of the building is required to be repaired. Foundation Techniques. This results in movements of foundation leading to cracks which can be checked by watering.

Concrete Pouring 52

Concrete Pouring Foundation Systems Wall Systems Structural Systems 52

Construction Specifier

JUNE 3, 2024

Polished concrete Efflorescence—Moisture moving through the concrete and carrying salts to the surface creates a white, powdery residue. Spalling—Moisture can exacerbate flaking or chipping on the concrete surface due to freeze-thaw cycles or rebar corrosion. diameter circle.

Flooring Systems 108

Flooring Systems Building Materials Manufacturing Concrete Pouring Controls Manufacturing 108

UK Construction Blog

OCTOBER 18, 2023

The post Reinforced Concrete: Strength and Durability for Modern Construction appeared first on UK Construction Blog. Reinforced concrete is a widely used construction material that combines the strengths of two components: concrete and steel reinforcement. In 1854, William B.

Concrete Pouring 62

Concrete Pouring Building Materials Manufacturing Building Materials Building Products Distribution 62

UK Construction Blog

MAY 12, 2024

Bench footing refers to a continuous concrete footing installed around the perimeter of a basement. It provides a sturdy foundation for framing basement walls and finishing the space. Bench footing is a foundation used to support walls in a basement when converting the space into a living area.

Concrete Pouring 52

Concrete Pouring Building Permits Building Code Compliance Piping Installation 52

CivilJungle

DECEMBER 26, 2021

Formwork is a temporary moulid that is used for the pouring of concrete. It also plays the function of resisting the lateral force of the plastic concrete within the formwork. Types of Slip Form System. The Slip form system is categorized into different types that are as follows. Vertical Slip Form System.

Concrete Pouring 52

Concrete Pouring Wall Systems Structural Systems Lifts 52

CivilJungle

DECEMBER 28, 2020

Reinforced Concrete Frame. The reinforced concrete frame is a superstructure combined with horizontal components , i.e. c olumns and vertical components, i.e. beams. Sometimes this concrete frame is also called as a skeleton of this entire structure. Concrete frames are mainly two types, those are-. Foundation.

Concrete Pouring 52

Concrete Pouring Foundation Systems Structural Systems Wall Systems 52

UK Construction Blog

JUNE 6, 2023

Ever wondered how concrete structures maintain their shape and strength during construction? As we dive into the various types of shuttering materials and techniques, prepare to be amazed by the innovative systems that enable complex and unique structures to come to life.

Steel Fabrication 52

Steel Fabrication Structural Systems Wall Systems Concrete Pouring 52

CCR Magazine

JANUARY 22, 2024

All residential and commercial buildings require sturdy, reliable foundations to remain structurally sound over decades of shifting soil, erosion, changing weather patterns, and typical wear-and-tear. But even modern engineering and construction cannot always prevent foundational issues from emerging.

Foundation Systems 52

Foundation Systems Concrete Pouring Waterproofing Systems Structural Systems 52

CivilJungle

FEBRUARY 5, 2022

Introduction of CMU Wall. The CMU blocks are available in various shapes and sizes in the market and are widely used in the construction of walls of the building. In this article, we will discuss all about the concrete masonry units. What is CMU Wall? The Full form of the CMU is Concrete Masonry units. ASTM C1372.

Masonry 52

Masonry Concrete Pouring Wall Systems Building Materials Manufacturing 52

Construction Specifier

JULY 25, 2024

The construction process and various finishing activities, such as pouring concrete, or dry wall finishing, can generate large amounts of moisture. Left unaddressed, this moisture can migrate into various areas of the structure, including into the roofing system, leaving materials wet and deteriorating. A 102-mm (4-in.)-thick

Roofing Systems 59

Roofing Systems Construction Management Concrete Pouring Wall Systems 59

CivilJungle

MAY 19, 2021

Concrete elements are generally of two types; those are Precast and cast-in-situ construction. If the Precast construction , the concrete is cast at a place other than the site, which is when required, are brought to the site using conveying equipment, such as cranes and are placed. Purpose of Providing Bond Breaker.

Concrete Pouring 52

Concrete Pouring Waterproofing Systems Wall Systems Foundation Systems 52

CivilJungle

MARCH 17, 2021

What Is Frost Wall? The Frost wall or frost-protected wall structure is built to keep soil below the building against freezing to secure the foundations in freezing conditions. The Types of frost walls, their specifications, and applications are addressed. This concrete contraction can result in internal tension.

Wall Systems 52

Wall Systems Foundation Systems Structural Systems Concrete Pouring 52

CivilJungle

NOVEMBER 18, 2020

Concrete elements are generally of two types; those are Precast and cast-in-situ construction. If the Precast construction , the concrete is cast at a place other than the site, which is when required, are brought to the site using conveying equipment, such as cranes and are placed. Purpose of Providing Bond Breaker.

Concrete Pouring 52

Concrete Pouring Waterproofing Systems Foundation Systems Wall Systems 52

CivilJungle

SEPTEMBER 26, 2020

Falsework includes the foundations , footings , and all structural members supporting the permanent structural elements. Falsework may be required to support steel and timber frameworks and masonry arches as well as in situ and precast concrete construction. • Shorbrace System. Cup-Lock Supporting System. Post-Head Jack.

Foundation Systems 52

Foundation Systems Structural Systems Roofing Systems Fire Protection System Installation 52

CivilJungle

MARCH 14, 2021

The spread footing is utilized to support the column & walls and additionally to convey & disseminate the load coming to the structure to the soil below it. The base of spread footing is slightly wider than load-bearing foundation base. This is also called a stepped spread foundation. Raft Foundation or Mat Foundation.

Foundation Systems 52

Foundation Systems Concrete Pouring Wall Systems Structural Systems 52

CivilJungle

FEBRUARY 10, 2021

When to Remove Concrete Forms ? Concrete forms are steel or aluminum mould in which concrete is poured to manufacture many structures like columns , slabs , beams , and many other types of cement structures. The forms can be removed after when the concrete is properly hardened in to the mould.

Concrete Pouring 52

Concrete Pouring Wall Systems Foundation Systems Curing 52

CivilJungle

MARCH 1, 2021

What Is Curing of Concrete? Curing performs a crucial role in the growth as well as the resilience of concrete strengths. Since applying water to that same concrete mixture there is an exothermic process that tends to toughen the concrete. Such an approach is termed the curing of concrete. Why Curing Is Important?

Curing 52

Curing Concrete Pouring Flooring Systems Wall Systems 52

CivilJungle

AUGUST 8, 2020

What Is Self Compact Concrete ? Making concrete structures without vibration has been done in the past. For example, the placement of concrete under-water is done by the use of tremie without vibration. Shaft concrete and mass concrete may be successfully placed without vibration. What Is U Box Text?

Concrete Pouring 52

Concrete Pouring Plumbing Systems Piping Installation Foundation Systems 52

CivilJungle

AUGUST 8, 2020

What Is Self Compact Concrete ? Making concrete structures without vibration has been done in the past. For example, the placement of concrete under-water is done by the use of tremie without vibration. Shaft concrete and mass concrete may be successfully placed without vibration. What Is U Box Text?

Concrete Pouring 52

Concrete Pouring Plumbing Systems Piping Installation Foundation Systems 52