CCR Magazine

JANUARY 22, 2024

All residential and commercial buildings require sturdy, reliable foundations to remain structurally sound over decades of shifting soil, erosion, changing weather patterns, and typical wear-and-tear. But even modern engineering and construction cannot always prevent foundational issues from emerging.

Foundation Systems 52

Foundation Systems Concrete Pouring Structural Systems Waterproofing Systems 52

CivilJungle

MAY 19, 2021

Concrete elements are generally of two types; those are Precast and cast-in-situ construction. If the Precast construction , the concrete is cast at a place other than the site, which is when required, are brought to the site using conveying equipment, such as cranes and are placed. Purpose of Providing Bond Breaker.

Concrete Pouring 52

Concrete Pouring Waterproofing Systems Wall Systems Foundation Systems 52

Construction Specifier

AUGUST 20, 2024

Below-grade insulation protects parts of a building that are below-ground levels such as basements, foundation walls, and crawl spaces, from heat transfer and moisture. The most common facer for polyiso roof insulation is an organic paper-faced material, which can absorb water, but remains dry when contained within a roofing system.

Energy Efficiency 59

Energy Efficiency Material Storage Building Materials Foundation Systems 59

CivilJungle

NOVEMBER 18, 2020

Concrete elements are generally of two types; those are Precast and cast-in-situ construction. If the Precast construction , the concrete is cast at a place other than the site, which is when required, are brought to the site using conveying equipment, such as cranes and are placed. Purpose of Providing Bond Breaker.

Concrete Pouring 52

Concrete Pouring Waterproofing Systems Foundation Systems Wall Systems 52

CivilJungle

JANUARY 7, 2021

Shotcrete/mortar/spray-concrete is a kind of refined concrete drizzled by gas hose-pipe nozzle at high pressure & velocity on a projectile motion on a prepared wall surface. It is often utilised in tunnels, underground walls, retaining walls, drainage systems & swimming pools for interim support.

Concrete Pouring 52

Concrete Pouring Wall Systems Fire Protection System Installation Foundation Systems 52

CivilJungle

AUGUST 13, 2022

The easy description of the top-down construction method will help the storeroom surface of the house will install in a system which, after realization of the cellar, will be set up from upper to lower surface by surface. Design of midriff wall. Construct wall fastener piles. Offer basic sweep to help midriff wall.

Wall Systems 52

Wall Systems Flooring Systems Foundation Systems Renewable Energy Systems 52

CivilJungle

DECEMBER 25, 2021

Water can be the most destructive element for structures that are mainly constructed from concrete. The water leakage problems are due to various issues such as defective plumbing systems. If the faces of the walls are exposed to the rain and it is not properly protected and waterproofing is done.

Ceiling Systems 52

Ceiling Systems Roofing Systems Waterproofing Systems Piping Installation 52

CivilJungle

MARCH 1, 2021

What Is Curing of Concrete? Curing performs a crucial role in the growth as well as the resilience of concrete strengths. Since applying water to that same concrete mixture there is an exothermic process that tends to toughen the concrete. Such an approach is termed the curing of concrete. Why Curing Is Important?

Curing 52

Curing Concrete Pouring Flooring Systems Wall Systems 52

CivilJungle

FEBRUARY 27, 2021

Brick Wall. Parapet Wall. Under every house is a foundation , and under most footing is Bedding for Footing. Also, Read: Difference Between Footing and Foundation | What is Footing and Foundation. #2. Generally, the plinth is built slightly well above the ground floor sometime after the foundation.

Painting/finishing 52

Painting/finishing Foundation Systems Wall Systems Flooring Systems 52

Natural Building

NOVEMBER 12, 2021

We mixed and poured our own concrete foundation. So far all waterproofing efforts have been 100% successful. I framed the walls with 2×10’s on 1 foot centers and then used 2×10 scraps to connect them into a shelving system that also adds strength. The soil type is well drained sand.

Wall Systems 52

Wall Systems Concrete Pouring Waterproofing Systems Flooring Systems 52

CivilJungle

NOVEMBER 19, 2020

In building construction, the first stage is earth excavation , which is then followed by dewatering the trenches, laying of brick flat sloping and PCC layer, placing of reinforcement caging for the construction of footings, and finally the Concreting of foundations. Adhesive resins such as bitumen, tar, natural gum, wax etc.

Building Materials Manufacturing 52

Building Materials Manufacturing Waterproofing Systems Concrete Pouring Building Materials 52

CivilJungle

APRIL 5, 2021

Slabs are structural elements manufactured from concrete constructed to produce flat surfaces, usually horizontal, in building floors, roofs, bridges. If reinforcement is required, slabs could also be pre-stressed or the concrete will be spilled over rebar positioned within the framework. What Is a Slab? Types of Slabs.

Roofing Systems 52

Roofing Systems Concrete Pouring Fire Protection System Installation Flooring Systems 52

GCP Applied Technologies

OCTOBER 27, 2023

Waterproofing Membrane Supports Redevelopment Growth in the United States Phillip.fry@gc… Fri, 10/27/2023 - 15:45 GCP Applied Technologies October 27, 2023 Waterproofing Membrane Supports Redevelopment Growth in the United States With urban space at a premium in the U.S., The concrete is then poured directly onto the membrane.

Waterproofing Systems 78

Waterproofing Systems Concrete Pouring Structural Systems Foundation Systems 78

CivilJungle

FEBRUARY 5, 2021

Bituminous Concrete Layer. #1. Bituminous Concrete Layer-. A mixture of aggregates continually graded from maximum size to minimum size is a bituminous concrete layer (typically less than 25 mm to 0.075 mm aggregates). Quality control of bituminous concrete construction. Layers in a Bituminous Pavement. kg per 10 sq.m

Concrete Pouring 52

Concrete Pouring Painting/finishing Ceiling Systems Building Materials 52

CivilJungle

APRIL 10, 2022

What Is Micro Concrete? Micro concrete is a cement-based coating that is used as a thin layer on different surfaces like tiles, wood, etc to give a look and feel of real concrete at less cost. The layer of micro concrete is about 2-3mm thick. How Is It Different from Conventional Concrete? Easy to Handle and Place.

Concrete Pouring 105

Concrete Pouring Flooring Systems Wall Systems Waterproofing Systems 105

CivilJungle

FEBRUARY 4, 2021

Both walls , slabs , stairs , along with door and window openings , are cast in place in the Monolithic Method. The lateral and gravity load resistance system in this system consists of reinforced concrete walls and slabs of reinforced concrete. Building monolithic foundations is truly easy.

Concrete Pouring 52

Concrete Pouring Foundation Systems Wall Systems Structural Systems 52

CivilJungle

OCTOBER 18, 2021

Then after architect consult with a structural engineer and MEP engineer for details of the reinforcements and other detail for use, how deep your foundation will be, the size of gravel to be used, column width, electrical, plumbing, etc. Also, read: IS 516:1959 Most Important Point (Method of Tests For Strength of Concrete).

Painting/finishing 98

Painting/finishing Electrical Wiring Installation Plumbing Systems Building Permits 98

CivilJungle

FEBRUARY 5, 2022

Introduction of CMU Wall. The CMU blocks are available in various shapes and sizes in the market and are widely used in the construction of walls of the building. In this article, we will discuss all about the concrete masonry units. What is CMU Wall? The Full form of the CMU is Concrete Masonry units. ASTM C1372.

Masonry 52

Masonry Concrete Pouring Wall Systems Building Materials Manufacturing 52

CivilJungle

DECEMBER 20, 2022

What Is a Concrete Expansion Joint? Concrete expansion joints are primarily a place or gap between two parts of a substantial plate; this space permits every definite dish to shift single-handedly and quickly from everyone. Also, a slight change discovers stress and strength on the concrete. What Is Construction Rate.

Concrete Pouring 52

Concrete Pouring Lean Construction Cost Control Building Materials 52

CivilJungle

FEBRUARY 21, 2021

Formwork is the mould used during the building to give the desired structural form by pressing concrete into the mould. In a single term, formwork is a mould that cast concrete in various shapes and sizes. Designers will also have to extract the shape until the concrete has achieved the required power. Plain concrete shape.

Concrete Pouring 52

Concrete Pouring Steel Fabrication Building Materials Manufacturing Building Materials 52

CivilJungle

MAY 24, 2021

What Is Concrete Topping? A Concrete topping is a process of laying out a layer of high strength concrete on the old worn-out layer of the concrete. It is nothing but placing a layer of concrete over the existing slab in order to give a finished floor surface on the old layer of concrete.

Concrete Pouring 84

Concrete Pouring Flooring Systems Plumbing Systems Curing 84

CivilJungle

JANUARY 26, 2022

A rebar is a steel bar that is used in the concrete to provide extra strength to the structure. Also, read: What Is Plumbing | Systems of Plumbing | Difference Between One pipe, Two Pipe, Single Stack, and Single Stack Partially Ventilated | How to Choose of Plumbing System. What Is Rebar Size and Rebar Diameters?

Steel Fabrication 52

Steel Fabrication Electrical Wiring Installation Concrete Pouring Wall Systems 52