GCP Applied Technologies

JUNE 7, 2018

Waterproofing Membranes for Below Grade Structures. Waterproofing Membranes for Below Grade Structures. Waterproofing Below Grade Structures. Water is under pressure below ground and forces its way through even the smallest cracks in the concrete. Concrete is also susceptible to damage in coastal areas.

Waterproofing Systems 103

Waterproofing Systems Concrete Pouring Structural Systems Foundation Systems 103

GCP Applied Technologies

SEPTEMBER 24, 2018

High strength rock anchors are then drilled into sound bedrock and then connected to the structure to help the structure resist uplift forces. Where local hydrology allows, drainage systems can redirect some of the water away from the foundation, but they are generally not enough protection for finished basement space.

Concrete Pouring 150

Concrete Pouring Waterproofing Systems Foundation Systems Structural Systems 150

Construction Specifier

MARCH 14, 2024

has posted a new document addressing construction-generated moisture and its impact on commercial roofing systems. the trade association for the manufacturers of single-ply roofing systems and related component materials, has posted a new document addressing construction-generated moisture and its impact on commercial roofing systems.

Roofing Systems 64

Roofing Systems Concrete Pouring Painting/finishing Structural Systems 64

CivilJungle

MAY 24, 2021

What Is Concrete Topping? A Concrete topping is a process of laying out a layer of high strength concrete on the old worn-out layer of the concrete. It is nothing but placing a layer of concrete over the existing slab in order to give a finished floor surface on the old layer of concrete.

Concrete Pouring 84

Concrete Pouring Flooring Systems Plumbing Systems Curing 84

GCP Applied Technologies

MARCH 3, 2020

Ready mix concrete life cycle. Concrete producers can leverage advanced concrete admixtures , predictive analytics tools, and more to improve efficiency, from materials management to batching to concrete delivery. Concrete mix design. Concrete admixtures help to enable the use of these alternate pozzolans … more.

Concrete Pouring 78

Concrete Pouring Wall Systems Quality Control Fire Protection System Installation 78

GCP Applied Technologies

NOVEMBER 10, 2020

How to reduce bug holes in concrete. Discover best practices for improving the aesthetics of your concrete, including reducing bug holes. When working on a concrete structure where aesthetics are important, extra care needs to be taken to prevent bug holes. Concrete handing: Pour rate. Phillip.fry@gc….

Concrete Pouring 78

Concrete Pouring Painting/finishing Building Materials Structural Systems 78

CivilJungle

APRIL 10, 2022

What Is Micro Concrete? Micro concrete is a cement-based coating that is used as a thin layer on different surfaces like tiles, wood, etc to give a look and feel of real concrete at less cost. The layer of micro concrete is about 2-3mm thick. How Is It Different from Conventional Concrete? Less Water Demand.

Concrete Pouring 105

Concrete Pouring Flooring Systems Wall Systems Waterproofing Systems 105

Civil + Structural Engineer

JUNE 10, 2024

At the turn of the century, the company pioneered the use of steel-reinforced concrete to create safer, stronger, and more efficient buildings. The project includes the creation of three large habitats with essentially no straight edges, including a main habitat consisting of 680 cubic yards of concrete and 355 tons of rebar.

Concrete Pouring 100

Concrete Pouring Project Management Consulting Surveying Site Planning 100

CCR Magazine

SEPTEMBER 13, 2024

As the Middle Tennessee’s first full-service hotel built in nearly a decade, the eight-story, 244-room Hilton Franklin Cool Springs offers one of the only roof-level patios in town plus a stylish lobby and contemporary guest rooms with Tubelite thermal entrance systems and floor-to-ceiling window wall. U-Factors for thermal performance.

Painting/finishing 52

Painting/finishing Wall Systems Roofing Systems Flooring Systems 52

The Korte Company

FEBRUARY 17, 2022

We actually did a house from start to finish in six weeks,” Gary remembers with pride. “It It was a great feeling any time you put your hands on something, put something together and walk away from it with a finished product.”. Gary’s first job out of school was driving a concrete truck for his father’s Highland Ready Mix business.

Concrete Pouring 98

Concrete Pouring Carpentry Flooring Systems Building Products Distribution 98

GCP Applied Technologies

JANUARY 20, 2023

All of this pressure means that water will push its way through the foundation, even through miniscule cracks in the concrete. Where local hydrology allows, drainage systems can redirect some of the water away from the foundation, but they are generally not enough protection for concrete and finished basement space.

Waterproofing Systems 78

Waterproofing Systems Foundation Systems Concrete Pouring Structural Systems 78

Natural Building

APRIL 16, 2014

To my knowledge, building science has never been approached with such an attitude of precise evaluation of all of the factors that affect the environmental impact of materials and building systems. Simple bar graphs indicate at a glance just how “green” each material or system might be.

Roofing Systems 63

Roofing Systems Wall Systems Foundation Systems Flooring Systems 63

CivilJungle

FEBRUARY 4, 2021

It is a structure formed from a sole material , assembled as well as excavated. The lateral and gravity load resistance system in this system consists of reinforced concrete walls and slabs of reinforced concrete. Monolithic building work is capable of cost-effectively providing high quality and robust structure.

Concrete Pouring 52

Concrete Pouring Foundation Systems Wall Systems Structural Systems 52

CivilJungle

JANUARY 29, 2022

What Is Cast-In-Situ Concrete? Cast-in-situ concrete is prepared, placed, and finished on the construction site. Another name of cast-in-situ concrete is poured-in-place concrete. Generally, concrete slabs, concrete foundations , beam, column, wall, roof, etc., What Is Cast in Place Concrete?

Concrete Pouring 52

Concrete Pouring Foundation Systems Wall Systems Curing 52

GCP Applied Technologies

JUNE 1, 2018

Reduce variability with an in-transit concrete management system. One way ready-mix producers can minimize leakage—rejected loads, back charges and material inefficiencies—is through improved consistency truck to truck, reducing variability of the concrete. All while delivering consistent, quality concrete truck after truck.

Concrete Pouring 60

Concrete Pouring Building Performance Measurement Quality Control Facility Management 60

CivilJungle

JANUARY 7, 2021

Shotcrete/mortar/spray-concrete is a kind of refined concrete drizzled by gas hose-pipe nozzle at high pressure & velocity on a projectile motion on a prepared wall surface. It is often utilised in tunnels, underground walls, retaining walls, drainage systems & swimming pools for interim support. Wet-Mix Shotcrete.

Concrete Pouring 52

Concrete Pouring Fire Protection System Installation Wall Systems Foundation Systems 52

GCP Applied Technologies

OCTOBER 4, 2018

Concrete construction innovations. Control flow concrete construction. Mass pours. One of the latest innovations in concrete construction is the development of an entirely new type of concrete. One of the latest innovations in concrete construction is the development of an entirely new type of concrete.

Concrete Pouring 60

Concrete Pouring Cost Control Building Controls Foundation Systems 60

CivilJungle

FEBRUARY 12, 2021

Concrete Release Agent: Releasing agents are coatings added to the surface of the formwork prior to concreting , in order to allow quick removal of formwork or shuttering. If the appearance of the concrete surface is relevant, it is important to take care of the finishing surface of the shutter. Spray may be added.

Concrete Pouring 52

Concrete Pouring Painting/finishing Wall Systems Building Materials Manufacturing 52

CivilJungle

DECEMBER 25, 2021

By discrepancy, poured concrete driveways must cure for seven days before being used. The mid-layer provides structure, and the top subcaste is a pattern-resistant face that gives the asphalt its continuity. Hot mix asphalt refers to the operating system rather than the type of asphalt. What Is Asphalt Driveway ?

Concrete Pouring 98

Concrete Pouring Painting/finishing Structural Systems Energy Conservation 98

GCP Applied Technologies

MAY 11, 2018

Using control flow concrete for top down construction. This concrete construction method allows for above ground construction work to be carried out at the same time as excavation of the basement, resulting in significant time savings. Construction of concrete floor slabs. Concrete challenges in top down construction.

Concrete Pouring 60

Concrete Pouring Cost Control Quality Control Building Controls 60

GCP Applied Technologies

MAY 11, 2018

Using control flow concrete for top down construction. Commonly used in urban areas, top down construction is often used for high rise buildings with deep basements and for underground structures such as car parks and transit systems. . Construction of concrete floor slabs. Concrete challenges in top down construction.

Concrete Pouring 60

Concrete Pouring Cost Control Quality Control Building Controls 60

CivilJungle

JUNE 8, 2021

Introduction of Concrete Construction Tools for Construction Sites. Concrete is one of the most widely used building materials in the Construction Industry. There are various types of concrete construction tools are used on the construction site. Concrete construction tools help to complete the work fast with accuracy.

Concrete Pouring 52

Concrete Pouring Painting/finishing Heavy Lifting Transportation Material Handling 52

CivilJungle

DECEMBER 26, 2021

Formwork is a temporary moulid that is used for the pouring of concrete. The word ‘ Slip formwork ’ itself indicates the meaning that it is formwork that moves from its position for the construction of the structures. Slip Formwork used for the vertical construction of the RCC structures. Types of Slip Form System.

Concrete Pouring 52

Concrete Pouring Wall Systems Structural Systems Lifts 52

UK Construction Blog

MAY 12, 2024

However, traditional basement finishing methods often need to pay more attention to a critical first step – installing proper structural support. Bench footing refers to a continuous concrete footing installed around the perimeter of a basement. It provides peace of mind that the finished space will stand the test of time.

Concrete Pouring 52

Concrete Pouring Building Permits Building Code Compliance Piping Installation 52

Construction Specifier

JULY 25, 2024

By Chadwick Collins Photo and illustrations courtesy Single Ply Roofing Industry (SPRI) An often-overlooked issue during new construction or a commercial renovation project is the addition of unwanted moisture into the structure. Typically, water vapor or moisture movement—called diffusion—travels from warm humid (i.e. A 102-mm (4-in.)-thick

Roofing Systems 59

Roofing Systems Construction Management Concrete Pouring Wall Systems 59

UK Construction Blog

JUNE 6, 2023

Ever wondered how concrete structures maintain their shape and strength during construction? As we dive into the various types of shuttering materials and techniques, prepare to be amazed by the innovative systems that enable complex and unique structures to come to life.

Steel Fabrication 52

Steel Fabrication Structural Systems Wall Systems Concrete Pouring 52

CivilJungle

FEBRUARY 6, 2021

The word Monolithic means “all in a single pour” so in construction where Monolithic Slab is used the foundation is made in one single pour that is made up of a layer of a concrete slab with thicker area under the load-bearing walls and all the edges of the perimeter to replace the footer. What Is a Monolithic Slab?

Concrete Pouring 52

Concrete Pouring Foundation Systems Wall Systems Flooring Systems 52

CCR Magazine

JUNE 21, 2024

he towering skyscrapers that grace the cityscapes, the sturdy bridges that connect communities, and the intricate foundations of every home – all these marvels of construction rely heavily on a workhorse machine: the concrete pump. Imagine the backbreaking labor and logistical nightmare it would be to move tons of heavy, wet concrete by hand.

Concrete Pouring 52

Concrete Pouring Heavy Equipment Manufacturing Cost Control Controls Manufacturing 52

CCR Magazine

DECEMBER 10, 2024

Epoxy floor coatings present a robust solution, offering strength up to three times greater than standard concrete. The coating’s exceptional bond to concrete substrates ensures it remains intact for years, even in challenging environments. Epoxy’s non-porous surface repels liquids, preventing absorption and staining.

Flooring Systems 52

Flooring Systems Heavy Equipment Manufacturing Concrete Pouring Curing 52

The Korte Company

OCTOBER 3, 2018

Tilt-Up construction combines the strength and durability of reinforced concrete with the precision and efficiency of the Design-Build methodology. Tilt-Up construction features series of concrete panels tilted up into place to form a building’s exterior wall. Next, concrete is poured into the forms and finished.

Concrete Pouring 61

Concrete Pouring Energy Efficiency Building Products Distribution Building Materials 61

CivilJungle

DECEMBER 28, 2020

Reinforced Concrete Frame. The reinforced concrete frame is a superstructure combined with horizontal components , i.e. c olumns and vertical components, i.e. beams. Sometimes this concrete frame is also called as a skeleton of this entire structure. Concrete frames are mainly two types, those are-. Cast in situ.

Concrete Pouring 52

Concrete Pouring Foundation Systems Structural Systems Wall Systems 52

CivilJungle

NOVEMBER 18, 2020

Concrete elements are generally of two types; those are Precast and cast-in-situ construction. If the Precast construction , the concrete is cast at a place other than the site, which is when required, are brought to the site using conveying equipment, such as cranes and are placed. Purpose of Providing Bond Breaker.

Waterproofing Systems 52

Waterproofing Systems Concrete Pouring Foundation Systems Wall Systems 52

CivilJungle

AUGUST 8, 2020

What Is Self Compact Concrete ? Making concrete structures without vibration has been done in the past. For example, the placement of concrete under-water is done by the use of tremie without vibration. Shaft concrete and mass concrete may be successfully placed without vibration. What Is U Box Text?

Concrete Pouring 52

Concrete Pouring Plumbing Systems Piping Installation Foundation Systems 52

CivilJungle

AUGUST 8, 2020

What Is Self Compact Concrete ? Making concrete structures without vibration has been done in the past. For example, the placement of concrete under-water is done by the use of tremie without vibration. Shaft concrete and mass concrete may be successfully placed without vibration. What Is U Box Text?

Concrete Pouring 52

Concrete Pouring Plumbing Systems Piping Installation Foundation Systems 52

CivilJungle

APRIL 26, 2020

What Is Concrete? Concrete is the final product resulting from mixing cement , aggregates (including sand), water, and mixtures. The first use of concrete was by the Roman Empire. The Pantheon is the largest unreinforced concrete dome in the world, built-in 120 A.D. Different Types of Concrete. Dry lean Concrete.

Concrete Pouring 64

Concrete Pouring Steel Fabrication Building Materials Manufacturing Structural Systems 64

CivilJungle

MAY 19, 2021

Concrete elements are generally of two types; those are Precast and cast-in-situ construction. If the Precast construction , the concrete is cast at a place other than the site, which is when required, are brought to the site using conveying equipment, such as cranes and are placed. Purpose of Providing Bond Breaker.

Concrete Pouring 52

Concrete Pouring Waterproofing Systems Wall Systems Foundation Systems 52

CivilJungle

MARCH 1, 2021

What Is Curing of Concrete? Curing performs a crucial role in the growth as well as the resilience of concrete strengths. Since applying water to that same concrete mixture there is an exothermic process that tends to toughen the concrete. Such an approach is termed the curing of concrete. Why Curing Is Important?

Curing 52

Curing Concrete Pouring Flooring Systems Wall Systems 52