GCP Applied Technologies

MAY 28, 2018

Waterproof concrete: Is it enough for protecting foundations? Although waterproofing systems account for a small fraction of the cost of an overall building project, if the wrong solution is chosen or it’s installed improperly, the costs of remediation can be tremendous. . Creating waterproof concrete. All concrete cracks.

Waterproofing Systems 104

Waterproofing Systems Concrete Pouring Structural Systems Wall Systems 104

CivilJungle

APRIL 10, 2022

What Is Micro Concrete? Micro concrete is a cement-based coating that is used as a thin layer on different surfaces like tiles, wood, etc to give a look and feel of real concrete at less cost. The layer of micro concrete is about 2-3mm thick. How Is It Different from Conventional Concrete? Less Water Demand.

Concrete Pouring 105

Concrete Pouring Flooring Systems Wall Systems Waterproofing Systems 105

GCP Applied Technologies

JUNE 7, 2018

Protecting below grade spaces such as tunnels as well as foundation walls and basements is a complex challenge, due to a number of environmental factors that can degrade the structure or cause tremendous damage to what is stored within it. Concrete is also susceptible to damage in coastal areas. Waterproof concrete.

Waterproofing Systems 103

Waterproofing Systems Concrete Pouring Structural Systems Foundation Systems 103

Construction Specifier

MARCH 14, 2024

has posted a new document addressing construction-generated moisture and its impact on commercial roofing systems. the trade association for the manufacturers of single-ply roofing systems and related component materials, has posted a new document addressing construction-generated moisture and its impact on commercial roofing systems.

Roofing Systems 64

Roofing Systems Concrete Pouring Painting/finishing Structural Systems 64

GCP Applied Technologies

MARCH 3, 2020

Ready mix concrete life cycle. Concrete producers can leverage advanced concrete admixtures , predictive analytics tools, and more to improve efficiency, from materials management to batching to concrete delivery. Concrete mix design. Concrete admixtures help to enable the use of these alternate pozzolans … more.

Concrete Pouring 78

Concrete Pouring Wall Systems Quality Control Fire Protection System Installation 78

CCR Magazine

SEPTEMBER 13, 2024

As the Middle Tennessee’s first full-service hotel built in nearly a decade, the eight-story, 244-room Hilton Franklin Cool Springs offers one of the only roof-level patios in town plus a stylish lobby and contemporary guest rooms with Tubelite thermal entrance systems and floor-to-ceiling window wall.

Painting/finishing 52

Painting/finishing Wall Systems Roofing Systems Flooring Systems 52

Natural Building

APRIL 16, 2014

To my knowledge, building science has never been approached with such an attitude of precise evaluation of all of the factors that affect the environmental impact of materials and building systems. Simple bar graphs indicate at a glance just how “green” each material or system might be.

Roofing Systems 63

Roofing Systems Wall Systems Foundation Systems Flooring Systems 63

CivilJungle

MAY 24, 2021

What Is Concrete Topping? A Concrete topping is a process of laying out a layer of high strength concrete on the old worn-out layer of the concrete. It is nothing but placing a layer of concrete over the existing slab in order to give a finished floor surface on the old layer of concrete.

Concrete Pouring 84

Concrete Pouring Flooring Systems Plumbing Systems Curing 84

The Korte Company

FEBRUARY 17, 2022

We actually did a house from start to finish in six weeks,” Gary remembers with pride. “It It was a great feeling any time you put your hands on something, put something together and walk away from it with a finished product.”. Gary’s first job out of school was driving a concrete truck for his father’s Highland Ready Mix business.

Concrete Pouring 98

Concrete Pouring Carpentry Flooring Systems Building Products Distribution 98

CivilJungle

JANUARY 29, 2022

What Is Cast-In-Situ Concrete? Cast-in-situ concrete is prepared, placed, and finished on the construction site. Another name of cast-in-situ concrete is poured-in-place concrete. Generally, concrete slabs, concrete foundations , beam, column, wall, roof, etc.,

Concrete Pouring 52

Concrete Pouring Foundation Systems Wall Systems Curing 52

Civil + Structural Engineer

JUNE 10, 2024

At the turn of the century, the company pioneered the use of steel-reinforced concrete to create safer, stronger, and more efficient buildings. The project includes the creation of three large habitats with essentially no straight edges, including a main habitat consisting of 680 cubic yards of concrete and 355 tons of rebar.

Concrete Pouring 100

Concrete Pouring Project Management Consulting Surveying Site Planning 100

Construction Specifier

JUNE 3, 2024

Curing problems—High moisture levels can interfere with the chemical curing process of resinous materials, leading to a tacky or soft finish. Polished concrete Efflorescence—Moisture moving through the concrete and carrying salts to the surface creates a white, powdery residue. diameter circle.

Flooring Systems 108

Flooring Systems Building Materials Manufacturing Concrete Pouring Controls Manufacturing 108

CivilJungle

FEBRUARY 4, 2021

Both walls , slabs , stairs , along with door and window openings , are cast in place in the Monolithic Method. The lateral and gravity load resistance system in this system consists of reinforced concrete walls and slabs of reinforced concrete. Building monolithic foundations is truly easy.

Concrete Pouring 52

Concrete Pouring Foundation Systems Wall Systems Structural Systems 52

CivilJungle

FEBRUARY 12, 2021

Concrete Release Agent: Releasing agents are coatings added to the surface of the formwork prior to concreting , in order to allow quick removal of formwork or shuttering. If the appearance of the concrete surface is relevant, it is important to take care of the finishing surface of the shutter. Spray may be added.

Concrete Pouring 52

Concrete Pouring Painting/finishing Wall Systems Building Materials Manufacturing 52

CivilJungle

JANUARY 7, 2021

Shotcrete/mortar/spray-concrete is a kind of refined concrete drizzled by gas hose-pipe nozzle at high pressure & velocity on a projectile motion on a prepared wall surface. It is often utilised in tunnels, underground walls, retaining walls, drainage systems & swimming pools for interim support.

Concrete Pouring 52

Concrete Pouring Fire Protection System Installation Wall Systems Foundation Systems 52

GCP Applied Technologies

OCTOBER 4, 2018

Concrete construction innovations. Control flow concrete construction. Mass pours. One of the latest innovations in concrete construction is the development of an entirely new type of concrete. One of the latest innovations in concrete construction is the development of an entirely new type of concrete.

Concrete Pouring 60

Concrete Pouring Cost Control Building Controls Foundation Systems 60

GCP Applied Technologies

MAY 11, 2018

Using control flow concrete for top down construction. This concrete construction method allows for above ground construction work to be carried out at the same time as excavation of the basement, resulting in significant time savings. The construction typically begins with: Execution of diaphragm walls. Control flow concrete.

Concrete Pouring 60

Concrete Pouring Cost Control Quality Control Building Controls 60

GCP Applied Technologies

MAY 11, 2018

Using control flow concrete for top down construction. Commonly used in urban areas, top down construction is often used for high rise buildings with deep basements and for underground structures such as car parks and transit systems. . The construction typically begins with: Execution of diaphragm walls. Control flow concrete.

Concrete Pouring 60

Concrete Pouring Cost Control Quality Control Building Controls 60

CivilJungle

DECEMBER 26, 2021

Formwork is a temporary moulid that is used for the pouring of concrete. It also plays the function of resisting the lateral force of the plastic concrete within the formwork. Types of Slip Form System. The Slip form system is categorized into different types that are as follows. Vertical Slip Form System.

Concrete Pouring 52

Concrete Pouring Wall Systems Structural Systems Lifts 52

UK Construction Blog

MAY 12, 2024

However, traditional basement finishing methods often need to pay more attention to a critical first step – installing proper structural support. Bench footing refers to a continuous concrete footing installed around the perimeter of a basement. It provides a sturdy foundation for framing basement walls and finishing the space.

Concrete Pouring 52

Concrete Pouring Building Permits Building Code Compliance Piping Installation 52

Construction Specifier

JUNE 11, 2020

Bowdoin College’s Roux Center for the Environment, Brunswick, Maine, utilized silicone-glazed, fire-rated steel curtain wall to create transparency and promote occupant well-being. The Underwriters Laboratories (UL)-classified system acts as a barrier against high temperatures, along with smoke and flames in a fire situation.

Wall Systems 69

Wall Systems Green Building Concrete Pouring Building Codes 69

CivilJungle

FEBRUARY 6, 2021

The word Monolithic means “all in a single pour” so in construction where Monolithic Slab is used the foundation is made in one single pour that is made up of a layer of a concrete slab with thicker area under the load-bearing walls and all the edges of the perimeter to replace the footer. What Is a Monolithic Slab?

Concrete Pouring 52

Concrete Pouring Foundation Systems Wall Systems Flooring Systems 52

CivilJungle

DECEMBER 25, 2021

Also, read: How to Load Calculation on Column, Beam, Wall & Slab. By discrepancy, poured concrete driveways must cure for seven days before being used. Hot mix asphalt refers to the operating system rather than the type of asphalt. What Is Asphalt Road? What Is Asphalt Driveway ? Hot Mix Asphalt. Cold Mix Asphalt.

Concrete Pouring 98

Concrete Pouring Painting/finishing Structural Systems Energy Conservation 98

Construction Specifier

JULY 25, 2024

The construction process and various finishing activities, such as pouring concrete, or dry wall finishing, can generate large amounts of moisture. Left unaddressed, this moisture can migrate into various areas of the structure, including into the roofing system, leaving materials wet and deteriorating.

Roofing Systems 59

Roofing Systems Construction Management Concrete Pouring Wall Systems 59

Work Gearz

OCTOBER 16, 2020

Water is needed in the mixing the cement and binding them together to form concrete floors or walls of buildings. . And when water interferes with cement work in the form of heavy pouring rain, things can go worse than good! How long does concrete need to dry before it rains? So, let’s get started!

Concrete Pouring 52

Concrete Pouring Curing Flooring Systems Painting/finishing 52

CivilJungle

JULY 18, 2022

But sometimes we have to kill the roots because they can destroy our home walls, foundations, floor, etc. Killing tree roots with boiling water is a very effective and easy system compared to the other systems. In this system for killing the trees, we have to follow some steps. Kill Tree Roots with Boiling Water.

Concrete Pouring 52

Concrete Pouring Painting/finishing Foundation Systems Piping Installation 52

UK Construction Blog

JUNE 6, 2023

Ever wondered how concrete structures maintain their shape and strength during construction? As we dive into the various types of shuttering materials and techniques, prepare to be amazed by the innovative systems that enable complex and unique structures to come to life.

Steel Fabrication 52

Steel Fabrication Structural Systems Wall Systems Concrete Pouring 52

CivilJungle

MARCH 1, 2021

What Is Curing of Concrete? Curing performs a crucial role in the growth as well as the resilience of concrete strengths. Since applying water to that same concrete mixture there is an exothermic process that tends to toughen the concrete. Such an approach is termed the curing of concrete. Why Curing Is Important?

Curing 52

Curing Concrete Pouring Flooring Systems Wall Systems 52

The Korte Company

OCTOBER 3, 2018

Tilt-Up construction combines the strength and durability of reinforced concrete with the precision and efficiency of the Design-Build methodology. Tilt-Up construction features series of concrete panels tilted up into place to form a building’s exterior wall. Next, concrete is poured into the forms and finished.

Concrete Pouring 61

Concrete Pouring Energy Efficiency Building Products Distribution Building Materials 61

CivilJungle

MAY 19, 2021

Concrete elements are generally of two types; those are Precast and cast-in-situ construction. If the Precast construction , the concrete is cast at a place other than the site, which is when required, are brought to the site using conveying equipment, such as cranes and are placed. Purpose of Providing Bond Breaker.

Concrete Pouring 52

Concrete Pouring Waterproofing Systems Wall Systems Foundation Systems 52

CivilJungle

FEBRUARY 5, 2022

Introduction of CMU Wall. The CMU blocks are available in various shapes and sizes in the market and are widely used in the construction of walls of the building. In this article, we will discuss all about the concrete masonry units. What is CMU Wall? The Full form of the CMU is Concrete Masonry units. ASTM C1372.

Masonry 52

Masonry Concrete Pouring Wall Systems Building Materials Manufacturing 52

CivilJungle

FEBRUARY 27, 2021

Brick Wall. Parapet Wall. Wetness decreases the strength of walls which produces unhealthful living environments. Thus it impacts painting as well as plaster which raises repair costs. Also, Read: What Is Tie Beam | Tie Beam Details | Advantages of Using Tie Beam | Tie Beam Reinforcement | Why Are Use Concrete Tie Beam.

Painting/finishing 52

Painting/finishing Foundation Systems Wall Systems Flooring Systems 52

CivilJungle

NOVEMBER 18, 2020

Concrete elements are generally of two types; those are Precast and cast-in-situ construction. If the Precast construction , the concrete is cast at a place other than the site, which is when required, are brought to the site using conveying equipment, such as cranes and are placed. Purpose of Providing Bond Breaker.

Waterproofing Systems 52

Waterproofing Systems Concrete Pouring Foundation Systems Wall Systems 52

CivilJungle

AUGUST 8, 2020

What Is Self Compact Concrete ? Making concrete structures without vibration has been done in the past. For example, the placement of concrete under-water is done by the use of tremie without vibration. Shaft concrete and mass concrete may be successfully placed without vibration. What Is U Box Text?

Concrete Pouring 52

Concrete Pouring Plumbing Systems Piping Installation Foundation Systems 52

CivilJungle

AUGUST 8, 2020

What Is Self Compact Concrete ? Making concrete structures without vibration has been done in the past. For example, the placement of concrete under-water is done by the use of tremie without vibration. Shaft concrete and mass concrete may be successfully placed without vibration. What Is U Box Text?

Concrete Pouring 52

Concrete Pouring Plumbing Systems Piping Installation Foundation Systems 52

Construction Specifier

JUNE 20, 2024

1 The only exception noted in the code is for a coal tar based roof system. Roof drainage systems The basic roof drainage systems consist of: (1) Roof drains connected to interior drainage piping or (2) Roof perimeter edge with or without gutters and downspouts or through-wall scupper openings with or without a downspout.

Roofing Systems 59

Roofing Systems Piping Installation Concrete Pouring Wall Systems 59

CivilJungle

DECEMBER 28, 2020

Reinforced Concrete Frame. The reinforced concrete frame is a superstructure combined with horizontal components , i.e. c olumns and vertical components, i.e. beams. Sometimes this concrete frame is also called as a skeleton of this entire structure. Concrete frames are mainly two types, those are-. Cast in situ.

Concrete Pouring 52

Concrete Pouring Foundation Systems Structural Systems Wall Systems 52